Mechanics of Epidermal Electronics

2012 ◽  
Vol 79 (3) ◽  
Author(s):  
Shuodao Wang ◽  
Ming Li ◽  
Jian Wu ◽  
Dae-Hyeong Kim ◽  
Nanshu Lu ◽  
...  
Keyword(s):  
High Performance ◽  
Electronic System ◽  
Van Der Waals Interactions ◽  
Electronic Systems ◽  
Element Analysis ◽  
Intimate Contact ◽  
Design And Optimization ◽  
Premature Babies ◽  
Machine Interface ◽  
Mechanics Concepts

Epidermal electronic system (EES) is a class of integrated electronic systems that are ultrathin, soft, and lightweight, such that it could be mounted to the epidermis based on van der Waals interactions alone, yet provides robust, intimate contact to the skin. Recent advances on this technology will enable many medical applications such as to monitor brain or heart activities, to monitor premature babies, to enhance the control of prosthetics, or to realize human-machine interface. In particular, the contact between EES and the skin is key to high-performance functioning of the above applications and is studied in this paper. The mechanics concepts that lead to successful designs of EES are also discussed. The results, validated by finite element analysis and experimental observations, provide simple, analytical guidelines for design and optimization of EES with various possible functionalities.

Parallel Computing for Tire Simulations

2011 ◽  
Vol 39 (3) ◽  
pp. 193-209 ◽  
Author(s):  
H. Surendranath ◽  
M. Dunbar
Keyword(s):  
High Performance ◽  
Effective Means ◽  
Cost Effective ◽  
Turnaround Time ◽  
Careful Consideration ◽  
Rolling Contact ◽  
Element Analysis ◽  
Parallel Solvers ◽  
Design Changes ◽  
Highly Nonlinear

Abstract Over the last few decades, finite element analysis has become an integral part of the overall tire design process. Engineers need to perform a number of different simulations to evaluate new designs and study the effect of proposed design changes. However, tires pose formidable simulation challenges due to the presence of highly nonlinear rubber compounds, embedded reinforcements, complex tread geometries, rolling contact, and large deformations. Accurate simulation requires careful consideration of these factors, resulting in the extensive turnaround time, often times prolonging the design cycle. Therefore, it is extremely critical to explore means to reduce the turnaround time while producing reliable results. Compute clusters have recently become a cost effective means to perform high performance computing (HPC). Distributed memory parallel solvers designed to take advantage of compute clusters have become increasingly popular. In this paper, we examine the use of HPC for various tire simulations and demonstrate how it can significantly reduce simulation turnaround time. Abaqus/Standard is used for routine tire simulations like footprint and steady state rolling. Abaqus/Explicit is used for transient rolling and hydroplaning simulations. The run times and scaling data corresponding to models of various sizes and complexity are presented.

Highly electroconductive and uniform WS2 film growth by sulfurization of W film using diethyl sulfide

2021 ◽  
Author(s):  
Yoobeen Lee ◽  
Jin Won Jung ◽  
Jin Seok Lee
Keyword(s):  
Transition Metal ◽  
Grain Boundaries ◽  
High Performance ◽  
Film Growth ◽  
Transition Metal Dichalcogenides ◽  
Electronic Systems ◽  
Intrinsic Defects ◽  
Diethyl Sulfide ◽  
Metal Dichalcogenides

The reduction of intrinsic defects, including vacancies and grain boundaries, remains one of the greatest challenges to produce high-performance transition metal dichalcogenides (TMDCs) electronic systems. A deeper comprehension of the...

Accelerated testing of super lightweight UHPC waffle deck under heavy vehicle simulator

2021 ◽  
Vol 16 (2-3) ◽  
pp. 61-74
Author(s):  
Sahar Ghasemi ◽  
Amir Mirmiran ◽  
Yulin Xiao ◽  
Kevin Mackie
Keyword(s):  
High Performance ◽  
Failure Modes ◽  
High Performance Concrete ◽  
High Strength ◽  
Heavy Vehicle ◽  
Wheel Load ◽  
Element Analysis ◽  
Vehicle Simulator ◽  
Pavement Testing ◽  
Heavy Vehicle Simulator

A super lightweight deck can enhance load rating and functionality of a bridge, especially those identified as structurally deficient. This study was aimed to develop and experimentally validate a novel bridge deck as an ultra-lightweight low-profile waffle slab of ultra-high-performance concrete (UHPC) with either carbon fiber reinforced polymer (CFRP) or high strength steel (HSS) reinforcement. The proposed system lends itself to accelerated bridge construction, rapid deck replacement in bridges with load restrictions, and bridge widening applications without the need to replace girders. Performance and failure modes of the proposed deck were initially assessed through extensive lab experiments and finite element analysis, which together confirmed that the proposed deck panel meets the AASHTO LRFD requirements. The proposed deck system is not susceptible to punching shear of its thin slab and fails in a rather ductile manner. To evaluate its long-term performance, the system was further tested under the dynamic impact of wheel load at the Accelerated Pavement Testing (APT) facility of the Florida Department of Transportation using a Heavy Vehicle Simulator (HVS).

scholarly journals Electromagnetic-Thermal Integration Design of Permanent Magnet Motor for Vehicles

2019 ◽  
Vol 2019 ◽  
pp. 1-8 ◽  
Author(s):  
Shijun Chen ◽  
Qi Zhang ◽  
Surong Huang
Keyword(s):  
Permanent Magnet ◽  
High Performance ◽  
Design Method ◽  
Electromagnetic Properties ◽  
Permanent Magnet Motor ◽  
Element Analysis ◽  
Experiment Platform ◽  
Motor Design ◽  
Dimensional Parameters ◽  
Thermal Integration

To more efficiently design high performance vehicular permanent magnet motor, an electromagnetic-thermal integration design method is presented, which considers both the electromagnetic properties and the temperature rise of motor winding when determining the main dimensional parameters of the motor. Then a 48-slot and 8-pole vehicular permanent magnet motor is designed with this method. The thermomagnetic coupling design is simulated and validated on the basis of multiphysical domain on finite element analysis. Then the prototype is analyzed and tested on a newly built motor experiment platform. It is shown that the simulation results and experimental results are consistent, which validate the accuracy and effectiveness of the new design method. Also this method is proved to well improve the efficiency of permanent magnet motor design.

scholarly journals Wellbore trajectory control tool seal system leakage analysis based on steady gap flow

2020 ◽  
Vol 12 (6) ◽  
pp. 168781402093046 ◽  
Author(s):  
Lei Shi ◽  
Keqiang Wang ◽  
Ding Feng ◽  
Hong Zhang ◽  
Peng Wang
Keyword(s):  
Prediction Method ◽  
Electronic System ◽  
Contact Length ◽  
Trajectory Control ◽  
Analysis Model ◽  
Rotating Shaft ◽  
Element Analysis ◽  
Gap Flow ◽  
Total Leakage ◽  
Gap Height

Lubricant leakage will inevitably occur during the working process of wellbore trajectory control tools. Even including the lubricant compensation system, serious leakage will still cause lacks lubrication of the internal mechanical structure as well as electronic system damaged by external infiltration fluid, especially when it comes to battery sub and other electronic equipment. Seal system leakage prediction method was presented based on the assumption of steady gap flow. It is assumed that there is a constant gap between the lip seal and the rotating shaft, the gap height is determined by oil film thickness, and the length of the gap was determined by the contact analysis using the Mooney–Rivlin constitutive model. The analysis results show that the contact length between the primary seal lip and the rotary shaft is about 0.1 mm under the condition of ensuring the contact between the deputy seal lip and the rotary shaft. The overall lubricant leakage finite element analysis model was established, and the relationship between the internal lubricant pressure of the tool and the total leakage was obtained. The results of analysis indicate that under the internal pressure of 0.03 MPa, the lubricant leakage is approximately 6 mL/h, which was verified by experiments.

scholarly journals High-performance magneto-rheological clutches for direct-drive actuation: Design and development

2021 ◽  
pp. 1045389X2110069
Author(s):  
Sergey Pisetskiy ◽  
Mehrdad Kermani
Keyword(s):  
High Performance ◽  
Degrees Of Freedom ◽  
Dynamic Range ◽  
Complete Analysis ◽  
Mass Ratio ◽  
Direct Drive ◽  
Element Analysis ◽  
Prototype Development ◽  
Magneto Rheological ◽  
Hall Sensors

This paper presents an improved design, complete analysis, and prototype development of high torque-to-mass ratio Magneto-Rheological (MR) clutches. The proposed MR clutches are intended as the main actuation mechanism of a robotic manipulator with five degrees of freedom. Multiple steps to increase the toque-to-mass ratio of the clutch are evaluated and implemented in one design. First, we focus on the Hall sensors’ configuration. Our proposed MR clutches feature embedded Hall sensors for the indirect torque measurement. A new arrangement of the sensors with no effect on the magnetic reluctance of the clutch is presented. Second, we improve the magnetization of the MR clutch. We utilize a new hybrid design that features a combination of an electromagnetic coil and a permanent magnet for improved torque-to-mass ratio. Third, the gap size reduction in the hybrid MR clutch is introduced and the effect of such reduction on maximum torque and the dynamic range of MR clutch is investigated. Finally, the design for a pair of MR clutches with a shared magnetic core for antagonistic actuation of the robot joint is presented and experimentally validated. The details of each approach are discussed and the results of the finite element analysis are used to highlight the required engineering steps and to demonstrate the improvements achieved. Using the proposed design, several prototypes of the MR clutch with various torque capacities ranging from 15 to 200 N·m are developed, assembled, and tested. The experimental results demonstrate the performance of the proposed design and validate the accuracy of the analysis used for the development.

Mechanism of the Transition From In-Plane Buckling to Helical Buckling for a Stiff Nanowire on an Elastomeric Substrate

2016 ◽  
Vol 83 (4) ◽  
Author(s):  
Youlong Chen ◽  
Yong Zhu ◽  
Xi Chen ◽  
Yilun Liu
Keyword(s):  
High Performance ◽  
Three Dimensional ◽  
Stretchable Electronics ◽  
Buckling Mode ◽  
Design And Optimization ◽  
Out Of Plane ◽  
Plane Direction ◽  
Plane Displacement ◽  
Helical Buckling ◽  
Selection Of

In this work, the compressive buckling of a nanowire partially bonded to an elastomeric substrate is studied via finite-element method (FEM) simulations and experiments. The buckling profile of the nanowire can be divided into three regimes, i.e., the in-plane buckling, the disordered buckling in the out-of-plane direction, and the helical buckling, depending on the constraint density between the nanowire and the substrate. The selection of the buckling mode depends on the ratio d/h, where d is the distance between adjacent constraint points and h is the helical buckling spacing of a perfectly bonded nanowire. For d/h > 0.5, buckling is in-plane with wavelength λ = 2d. For 0.27 < d/h < 0.5, buckling is disordered with irregular out-of-plane displacement. While, for d/h < 0.27, buckling is helical and the buckling spacing gradually approaches to the theoretical value of a perfectly bonded nanowire. Generally, the in-plane buckling induces smaller strain in the nanowire, but consumes the largest space. Whereas the helical mode induces moderate strain in the nanowire, but takes the smallest space. The study may shed useful insights on the design and optimization of high-performance stretchable electronics and three-dimensional complex nanostructures.

Evaluation of Compressive Strengths of HPS Plate Systems Stiffened with Trapezoidal Stiffeners

2013 ◽  
Vol 671-674 ◽  
pp. 1025-1028
Author(s):  
Dong Ku Shin ◽  
Kyungsik Kim
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
High Performance ◽  
Nonlinear Finite Element ◽  
Linear Strain ◽  
Element Analysis ◽  
Geometric Imperfections ◽  
Eurocode 3 ◽  
Initial Geometric Imperfections ◽  
Plate System

The ultimate compressive strengths of high performance steel (HPS) plate system stiffened longitudinally by closed stiffeners have been investigated by the nonlinear finite element analysis. Both conventional and high performance steels were considered in models following multi-linear strain hardening constitutive relationships. Initial geometric imperfections and residual stresses were also incorporated in the analysis. Numerical results have been compared to compressive strengths from Eurocode 3 EN 1993-1-5 and FHWA-TS-80-205. It has been found that although use of Eurocode 3 EN 1993-1-5 and FHWA-TS-80-205 may lead to highly conservative design strengths when very large column slenderness parameters are encountered

Bifunctional Flexible Fabrics with Excellent Joule Heating and Electromagnetic Interference Shielding Performance Based on Copper Sulfide/Glass Fiber Composite

Nanoscale ◽  
2021 ◽  
Author(s):  
Binguo Liu ◽  
Qi Zhang ◽  
Yuanhui Huang ◽  
Dong Liu ◽  
Wei Pan ◽  
...  
Keyword(s):  
Electromagnetic Interference ◽  
Copper Sulfide ◽  
High Performance ◽  
Fiber Composite ◽  
Low Cost ◽  
Electronic Systems ◽  
Electromagnetic Interference Shielding ◽  
Glass Fiber Composite ◽  
Wearable Electronic ◽  
Sulfide Glass

Flexible and wearable electronic technology is in great demand with the rising of smart electronic systems. Among this, exploring multifunctional with high performance at low cost has attracted extensive attention...

Probabilistic Fracture Mechanics for Heavy Duty Gas Turbine Rotor Forgings

2017 ◽  
Author(s):  
Kai Kadau ◽  
Phillip W. Gravett ◽  
Christian Amann
Keyword(s):  
Fracture Mechanics ◽  
High Performance ◽  
Computing Methodology ◽  
Direct Simulation Monte Carlo ◽  
Turbine Rotor ◽  
Heavy Duty ◽  
Element Analysis ◽  
Probabilistic Fracture Mechanics ◽  
Risk Of Failure ◽  
Heavy Duty Gas Turbine

We developed and successfully applied a direct simulation Monte-Carlo scheme to quantify the risk of fracture for heavy duty rotors commonly used in the energy sector. The developed Probabilistic Fracture Mechanics high-performance computing methodology and code ProbFM routinely assesses relevant modes of operation for a component by performing billions of individual fracture mechanics simulations. The methodology can be used for new design and life-optimization of components, as well as for the risk of failure quantification of in service rotors and their re-qualifications in conjunction with non-destructive examination techniques, such as ultrasonic testing. The developed probabilistic scheme integrates material data, ultra-sonic testing information, duty-cycle data, and finite element analysis in order to determine the risk of failure. The methodology provides an integrative and robust measure of the fitness for service and allows for a save and reliable operation management of heavy duty rotating equipment.

Sign in / Sign up

Export Citation Format

Share Document