Anharmonic Phonon Interactions at Interfaces and Contributions to Thermal Boundary Conductance

2011 ◽  
Vol 133 (6) ◽  
Author(s):  
Patrick E. Hopkins ◽  
John C. Duda ◽  
Pamela M. Norris
Keyword(s):  
Inelastic Scattering ◽  
Thermal Transport ◽  
Phonon Scattering ◽  
Transmission Model ◽  
Material Interfaces ◽  
Physical Consideration ◽  
New Model ◽  
Thermal Boundary Conductance ◽  
Anharmonic Coupling ◽  
Scattering Events

Continued reduction in characteristic dimensions in nanosystems has given rise to increasing importance of material interfaces on the overall system performance. With regard to thermal transport, this increases the need for a better fundamental understanding of the processes affecting interfacial thermal transport, as characterized by the thermal boundary conductance. When thermal boundary conductance is driven by phononic scattering events, accurate predictions of interfacial transport must account for anharmonic phononic coupling as this affects the thermal transmission. In this paper, a new model for phononic thermal boundary conductance is developed that takes into account anharmonic coupling, or inelastic scattering events, at the interface between two materials. Previous models for thermal boundary conductance are first reviewed, including the diffuse mismatch model, which only considers elastic phonon scattering events, and earlier attempts to account for inelastic phonon scattering, namely, the maximum transmission model and the higher harmonic inelastic model. A new model is derived, the anharmonic inelastic model, which provides a more physical consideration of the effects of inelastic scattering on thermal boundary conductance. This is accomplished by considering specific ranges of phonon frequency interactions and phonon number density conservation. Thus, this model considers the contributions of anharmonic, inelastically scattered phonons to thermal boundary conductance. This new anharmonic inelastic model shows improved agreement between the thermal boundary conductance predictions and experimental data at the Pb/diamond and Au/diamond interfaces due to its ability to account for the temperature dependent changing phonon population in diamond, which can couple anharmonically with multiple phonons in Pb and Au. We conclude by discussing phonon scattering selection rules at interfaces and the probability of occurrence of these higher order anharmonic interfacial phonon processes quantified in this work.

scholarly journals Contributions of Anharmonic Phonon Interactions to Thermal Boundary Conductance

2011 ◽  
Author(s):  
Patrick E. Hopkins ◽  
John C. Duda ◽  
Pamela M. Norris
Keyword(s):  
Inelastic Scattering ◽  
Thermal Transport ◽  
Phonon Scattering ◽  
Transmission Model ◽  
Material Interfaces ◽  
Physical Consideration ◽  
Interfacial Transport ◽  
New Model ◽  
Thermal Boundary Conductance ◽  
Scattering Events

Continued reduction of characteristic dimensions in nanosystems has given rise to increasing importance of material interfaces on the overall system performance. With regard to thermal transport, this increases the need for a better fundamental understanding of the processes affecting interfacial thermal transport, as characterized by the thermal boundary conductance. When thermal boundary conductance is driven by phononic scattering events, accurate predictions of interfacial transport must account for anharmonic phononic coupling as this affects the thermal transmission. In this paper, a new model for phononic thermal boundary conductance is developed that takes into account anharonic coupling, or inelastic scattering events, at the interface between two materials. Previous models for thermal boundary conductance are first reviewed, including the Diffuse Mismatch Model, which only consdiers elastic phonon scattering events, and earlier attempts to account for inelastic phonon scattering, namely, the Maximum Transmission Model and the Higher Harmonic Inelastic model. A new model is derived, the Anharmonic Inelastic Model, which provides a more physical consideration of the effects of inelastic scattering on thermal boundary conductance. This is accomplished by considering specific ranges of phonon frequency interactions and phonon number density conservation. Thus, this model considers the contributions of anharmonic, inelastically scattered phonons to thermal boundary conductance. This new Anharmonic Inelastic Model shows excellent agreement between model predictions and experimental data at the Pb/diamond interface due to its ability to account for the temperature dependent changing phonon population in diamond, which can couple anharmonically with multiple phonons in Pb.

Relative Contributions of Inelastic and Elastic Diffuse Phonon Scattering to Thermal Boundary Conductance Across Solid Interfaces

2009 ◽  
Vol 131 (2) ◽  
Author(s):  
Patrick E. Hopkins ◽  
Pamela M. Norris
Keyword(s):  
Experimental Data ◽  
Elastic Scattering ◽  
Inelastic Scattering ◽  
Debye Temperature ◽  
Diffuse Scattering ◽  
Phonon Scattering ◽  
Interfacial Transport ◽  
Thermal Boundary Conductance ◽  
Dielectric Interfaces ◽  
Scattering Events

The accuracy of predictions of phonon thermal boundary conductance using traditional models such as the diffuse mismatch model (DMM) varies depending on the types of material comprising the interface. The DMM assumes that phonons, undergoing diffuse scattering events, are elastically scattered, which drives the energy conductance across the interface. It has been shown that at relatively high temperatures (i.e., above the Debye temperature) previously ignored inelastic scattering events can contribute substantially to interfacial transport. In this case, the predictions from the DMM become highly inaccurate. In this paper, the effects of inelastic scattering on thermal boundary conductance at metal/dielectric interfaces are studied. Experimental transient thermoreflectance data showing inelastic trends are reviewed and compared to traditional models. Using the physical assumptions in the traditional models and experimental data, the relative contributions of inelastic and elastic scattering to thermal boundary conductance are inferred.

Examining Interfacial Diffuse Phonon Scattering Through Transient Thermoreflectance Measurements of Thermal Boundary Conductance

2009 ◽  
Vol 131 (4) ◽  
Author(s):  
Pamela M. Norris ◽  
Patrick E. Hopkins
Keyword(s):  
Inelastic Scattering ◽  
Phonon Scattering ◽  
Experimental Studies ◽  
Thermal Boundary Conductance ◽  
Debye Temperatures ◽  
Wide Range ◽  
Dielectric Interfaces ◽  
Order Of Magnitude ◽  
Atomic Mixing ◽  
Insight Into

Today’s electronic and optoelectronic devices are plagued by heat transfer issues. As device dimensions shrink and operating frequencies increase, ever-increasing amounts of thermal energy are being generated in smaller and smaller volumes. As devices shrink to length scales on the order of carrier mean free paths, thermal transport is no longer dictated by the thermal properties of the materials comprising the devices, but rather the transport of energy across the interfaces between adjacent materials in the devices. In this paper, current theories and experiments concerning phonon scattering processes driving thermal boundary conductance (hBD) are reviewed. Experimental studies of thermal boundary conductance conducted with the transient thermoreflectance technique challenging specific assumptions about phonon scattering during thermal boundary conductance are presented. To examine the effects of atomic mixing at the interface on hBD, a series of Cr/Si samples was fabricated subject to different deposition conditions. The varying degrees of atomic mixing were measured with Auger electron spectroscopy. Phonon scattering phenomena in the presence of interfacial mixing were observed with the trends in the Cr/Si hBD. The experimental results are reviewed and a virtual crystal diffuse mismatch model is presented to add insight into the effect of interatomic mixing at the interface. The assumption that phonons can only transmit energy across the interface by scattering with a phonon of the same frequency—i.e., elastic scattering, can lead to underpredictions of hBD by almost an order of magnitude. To examine the effects of inelastic scattering on hBD, a series of metal/dielectric interfaces with a wide range of vibrational similarity is studied at temperatures above and around materials’ Debye temperatures. Inelastic scattering is observed and new models are developed to predict hBD and its relative dependency on elastic and inelastic scattering events.

Effects of Inelastic Scattering on Thermal Boundary Conductance at Metal-Dielectric Interfaces

2007 ◽  
Author(s):  
Patrick E. Hopkins ◽  
Pamela M. Norris ◽  
Robert J. Stevens
Keyword(s):  
Experimental Data ◽  
Elastic Scattering ◽  
Inelastic Scattering ◽  
Debye Temperature ◽  
High Temperatures ◽  
Interfacial Transport ◽  
Thermal Boundary Conductance ◽  
Dielectric Interfaces ◽  
Scattering Events

The accuracy of predictions of thermal boundary conductance using traditional models such as the diffuse mismatch model (DMM) varies depending on the types of material comprising the interface. These traditional models assume that phonons are elastically scattered which drives the energy conductance across the interface. It has been shown that at relatively high temperatures (i.e., above the Debye temperature) inelastic scattering events can drive interfacial transport. In this case, the predictions from traditional models become highly inaccurate. In this paper, the effects of inelastic scattering on thermal boundary conductance at metal/dielectric interfaces are studied. Experimental transient thermoreflectance data showing inelastic trends are reviewed and compared to traditional models. Using the physical assumptions in the traditional models and the experimental data, the relative contributions of inelastic and elastic scattering on thermal boundary conductance is inferred.

scholarly journals Acoustic cavities in 2D heterostructures

2021 ◽  
Vol 12 (1) ◽  
Author(s):  
Maxim K. Zalalutdinov ◽  
Jeremy T. Robinson ◽  
Jose J. Fonseca ◽  
Samuel W. LaGasse ◽  
Tribhuwan Pandey ◽  
...  
Keyword(s):  
Sound Propagation ◽  
Phonon Scattering ◽  
Frequency Comb ◽  
Material Interfaces ◽  
Low Frequencies ◽  
Strongly Coupled ◽  
Propagation Analysis ◽  
Acoustic Cavities ◽  
Ab Initio Approach ◽  
Spatiotemporal Response

AbstractTwo-dimensional (2D) materials offer unique opportunities in engineering the ultrafast spatiotemporal response of composite nanomechanical structures. In this work, we report on high frequency, high quality factor (Q) 2D acoustic cavities operating in the 50–600 GHz frequency (f) range with f × Q up to 1 × 1014. Monolayer steps and material interfaces expand cavity functionality, as demonstrated by building adjacent cavities that are isolated or strongly-coupled, as well as a frequency comb generator in MoS2/h-BN systems. Energy dissipation measurements in 2D cavities are compared with attenuation derived from phonon-phonon scattering rates calculated using a fully microscopic ab initio approach. Phonon lifetime calculations extended to low frequencies (<1 THz) and combined with sound propagation analysis in ultrathin plates provide a framework for designing acoustic cavities that approach their fundamental performance limit. These results provide a pathway for developing platforms employing phonon-based signal processing and for exploring the quantum nature of phonons.

A Molecular Dynamics Study of Thermal Conductivity in Nanocomposites via the Phonon Wave Packet Method

2009 ◽  
Author(s):  
Zhiting Tian ◽  
Sang Kim ◽  
Ying Sun ◽  
Bruce White
Keyword(s):  
Thermal Conductivity ◽  
Molecular Dynamics ◽  
Wave Packet ◽  
Molecular Dynamics Simulations ◽  
Phonon Scattering ◽  
Flow Direction ◽  
Normal Incidence ◽  
Material Interfaces ◽  
Non Equilibrium Molecular Dynamics ◽  
Dynamics Simulations

The phonon wave packet technique is used in conjunction with the molecular dynamics simulations to directly observe phonon scattering at material interfaces. The phonon transmission coefficient of nanocomposites is examined as a function of the defect size, thin film thickness, orientation of interface to the heat flow direction. To generalize the results based on phonons in a narrow frequency range and at normal incidence, the effective thermal conductivity of the same nanocomposite structure is calculated using non-equilibrium molecular dynamics simulations for model nanocomposites formed by two mass-mismatched Ar-like solids and heterogeneous Si-SiCO2 systems. The results are compared with the modified effective medium formulation for nanocomposites.

Thermal boundary conductance between Al films and GaN nanowires investigated with molecular dynamics

2014 ◽  
Vol 16 (20) ◽  
pp. 9403-9410 ◽  
Author(s):  
Xiao-wang Zhou ◽  
Reese E. Jones ◽  
Patrick E. Hopkins ◽  
Thomas E. Beechem
Keyword(s):  
Molecular Dynamics ◽  
Molecular Dynamics Simulations ◽  
Thermal Transport ◽  
Thermal Boundary Conductance ◽  
Gan Nanowires ◽  
System P ◽  
Dynamics Simulations ◽  
Important System

Using molecular dynamics simulations, we studied the thermal boundary conductance between GaN nanowires and Al films and showed how it may be possible to enhance interfacial thermal transport in this important system.

Influence of Hot Electron Scattering and Electron–Phonon Interactions on Thermal Boundary Conductance at Metal/Nonmetal Interfaces

2014 ◽  
Vol 136 (9) ◽  
Author(s):  
Ashutosh Giri ◽  
Brian M. Foley ◽  
Patrick E. Hopkins
Keyword(s):  
Phonon Scattering ◽  
Energy Levels ◽  
Golden Rule ◽  
Energy Coupling ◽  
Hot Electron ◽  
Nonequilibrium Electron ◽  
Simplified Approach ◽  
Thermal Boundary Conductance ◽  
Order Of Magnitude ◽  
Unique Mechanism

It has recently been demonstrated that under certain conditions of electron nonequilibrium, electron to substrate energy coupling could represent a unique mechanism to enhance heat flow across interfaces. In this work, we present a coupled thermodynamic and quantum mechanical derivation of electron–phonon scattering at free electron metal/nonmetal substrate interfaces. A simplified approach to the Fermi's Golden Rule with electron energy transitions between only three energy levels is adopted to derive an electron–phonon diffuse mismatch model, that account for the electron–phonon thermal boundary conductance at metal/insulator interfaces increases with electron temperature. Our approach demonstrates that the metal-electron/nonmetal phonon conductance at interfaces can be an order of magnitude larger than purely phonon driven processes when the electrons are driven out of equilibrium with the phonons, consistent with recent experimental observations.

Effects of composition and phonon scattering mechanisms on thermal transport in MFI zeolite films

2007 ◽  
Vol 102 (5) ◽  
pp. 053523 ◽  
Author(s):  
Yeny Hudiono ◽  
Abraham Greenstein ◽  
Carine Saha-Kuete ◽  
Brandon Olson ◽  
Samuel Graham ◽  
...  
Keyword(s):  
Thermal Transport ◽  
Phonon Scattering ◽  
Mfi Zeolite ◽  
Scattering Mechanisms ◽  
Zeolite Films
Sign in / Sign up

Export Citation Format

Share Document