Natural Convection Flows in Parallel-Channel Systems

1963 ◽  
Vol 85 (4) ◽  
pp. 339-345 ◽  
Author(s):  
J. C. Chato
Keyword(s):  
Natural Convection ◽  
Flow Pattern ◽  
Heat Input ◽  
Natural Circulation ◽  
Flow Patterns ◽  
Parallel Channel ◽  
Multiple Channel ◽  
Channel Configuration ◽  
Channel Systems

An analysis was developed for natural circulation flows in vertical multiple-channel systems with nonuniform heat inputs. A three-channel configuration was investigated in detail both analytically and experimentally. The results showed the existence of a metastable regime in which two metastable flow patterns could occur for a given set of heat input rates. A third predicted flow pattern in this regime was shown to be unstable and, therefore, nonexistent in practice.

The flow patterning capability of localized natural convection

2016 ◽  
Vol 18 (36) ◽  
pp. 25380-25387 ◽  
Author(s):  
Ling-Ting Huang ◽  
Ling Chao
Keyword(s):  
Natural Convection ◽  
Flow Pattern ◽  
State Diagram ◽  
Flow Patterns ◽  
Operating Conditions ◽  
Heat Sources

Controlling flow patterns to align materials can have various applications in optics, electronics, and biosciences. We developed a natural-convection-based method to create desirable spatial flow patterns by controlling the locations of heat sources and proposed a flow pattern state diagram which suggests a suitable range of operating conditions for flow patterning.

scholarly journals Numerical Investigation of Startup Instabilities in Parallel-Channel Natural Circulation Boiling Systems

2010 ◽  
Vol 2010 ◽  
pp. 1-8 ◽  
Author(s):  
S. P. Lakshmanan ◽  
Manmohan Pandey
Keyword(s):  
Boundary Conditions ◽  
Flow Resistance ◽  
Channel Model ◽  
Single Channel ◽  
Natural Circulation ◽  
Type I ◽  
Parallel Channel ◽  
Scaled Model ◽  
Flow Fluctuations ◽  
Channel Systems

The behaviour of a parallel-channel natural circulation boiling water reactor under a low-pressure low-power startup condition has been studied numerically (using RELAP5) and compared with its scaled model. The parallel-channel RELAP5 model is an extension of a single-channel model developed and validated with experimental results. Existence of in-phase and out-of-phase flashing instabilities in the parallel-channel systems is investigated through simulations under equal and unequal power boundary conditions in the channels. The effect of flow resistance on Type-I oscillations is explored. For nonidentical condition in the channels, the flow fluctuations in the parallel-channel systems are found to be out-of-phase.

PARALLEL-CHANNEL INSTABILITY IN NATURAL CIRCULATION SYSTEM

2006 ◽  
Vol 18 (4) ◽  
pp. 305-333 ◽  
Author(s):  
Mio Hirayama ◽  
Hisashi Umekawa ◽  
Mamoru Ozawa
Keyword(s):  
Natural Circulation ◽  
Circulation System ◽  
Parallel Channel

scholarly journals Flow Pattern Map of Flow Boiling in a Rectangular Channel Filled with Porous Media

Energies ◽  
2021 ◽  
Vol 14 (9) ◽  
pp. 2440
Author(s):  
Youngwoo Kim ◽  
Dae Yeon Kim ◽  
Kyung Chun Kim
Keyword(s):  
Porous Media ◽  
Flow Pattern ◽  
Flow Regime ◽  
Annular Flow ◽  
Flow Boiling ◽  
Rectangular Channel ◽  
Flow Patterns ◽  
Flow Pattern Map ◽  
Mist Flow ◽  
Churn Flow

A flow visualization study was carried out for flow boiling in a rectangular channel filled with and without metallic random porous media. Four main flow patterns are observed as intermittent slug-churn flow, churn-annular flow, annular-mist flow, and mist flow regimes. These flow patterns are clearly classified based on the high-speed images of the channel flow. The results of the flow pattern map according to the mass flow rate were presented using saturation temperatures and the materials of porous media as variables. As the saturation temperatures increased, the annular-mist flow regime occupied a larger area than the lower saturation temperatures condition. Therefore, the churn flow regime is narrower, and the slug flow more quickly turns to annular flow with the increasing vapor quality. The pattern map is not significantly affected by the materials of porous media.

Two-Phase Flow and Heat Transfer in Rectangular Micro-Channels

2003 ◽  
Author(s):  
Weilin Qu ◽  
Seok-Mann Yoon ◽  
Issam Mudawar
Keyword(s):  
Heat Transfer ◽  
Pressure Drop ◽  
Flow Pattern ◽  
Two Phase Flow ◽  
Flow Patterns ◽  
Heat Sinks ◽  
Phase Flow ◽  
Micro Channel ◽  
Two Phase ◽  
Micro Channels

Knowledge of flow pattern and flow pattern transitions is essential to the development of reliable predictive tools for pressure drop and heat transfer in two-phase micro-channel heat sinks. In the present study, experiments were conducted with adiabatic nitrogen-water two-phase flow in a rectangular micro-channel having a 0.406 × 2.032 mm cross-section. Superficial velocities of nitrogen and water ranged from 0.08 to 81.92 m/s and 0.04 to 10.24 m/s, respectively. Flow patterns were first identified using high-speed video imaging, and still photos were then taken for representative patterns. Results reveal that the dominant flow patterns are slug and annular, with bubbly flow occurring only occasionally; stratified and churn flow were never observed. A flow pattern map was constructed and compared with previous maps and predictions of flow pattern transition models. Annual flow is identified as the dominant flow pattern for conditions relevant to two-phase micro-channel heat sinks, and forms the basis for development of a theoretical model for both pressure drop and heat transfer in micro-channels. Features unique to two-phase micro-channel flow, such as laminar liquid and gas flows, smooth liquid-gas interface, and strong entrainment and deposition effects are incorporated into the model. The model shows good agreement with experimental data for water-cooled heat sinks.

scholarly journals Footprints of a flapping wing

2017 ◽  
Vol 818 ◽  
pp. 1-4 ◽  
Author(s):  
Jun Zhang
Keyword(s):  
Flow Pattern ◽  
External Force ◽  
Thrust Force ◽  
Flow Patterns ◽  
Flapping Wing ◽  
Flapping Wings ◽  
Left Behind ◽  
Full Picture

Birds have to flap their wings to generate the needed thrust force, which powers them through the air. But how exactly do flapping wings create such force, and at what amplitude and frequency should they operate? These questions have been asked by many researchers. It turns out that much of the secret is hidden in the wake left behind the flapping wing. Exemplified by the study of Andersen et al. (J. Fluid Mech., vol. 812, 2017, R4), close examination of the flow pattern behind a flapping wing will inform us whether the wing is towed by an external force or able to generate a net thrust force by itself. Such studies are much like looking at the footprints of terrestrial animals as we infer their size and weight, figuring out their walking and running gaits. A map that displays the collection of flow patterns after a flapping wing, using flapping frequency and amplitude as the coordinates, offers a full picture of its flying ‘gaits’.

scholarly journals Suspended sediment distribution under varied currents in the largest river-connected lake of China

2017 ◽  
Vol 18 (3) ◽  
pp. 994-1004 ◽  
Author(s):  
Hua Wang ◽  
Yijun Zhao ◽  
Fengnian Zhou ◽  
Huaiyu Yan ◽  
Yanqing Deng ◽  
...  
Keyword(s):  
Flow Pattern ◽  
Suspended Sediment ◽  
Flow Patterns ◽  
Field Investigation ◽  
Gravity Flow ◽  
Shear Stresses ◽  
Sediment Distribution ◽  
Back Flow ◽  
The North ◽  
Dry Seasons

Abstract Poyang Lake was selected as the research area. Based on laboratory experiment, field investigation and numerical simulation, the spatial distributions of suspended sediment (SS) under the gravity-flow, jacking-flow and back-flow patterns were quantitatively analysed. An annular flume experiment was conducted to determine the critical starting shear stresses of the sediments in the flood and dry seasons. By numerical experiment, the SS transport under different flow patterns was explored. Several results stand out. (1) The critical starting shear stresses of the sediments in the flood and dry seasons were 0.35 N·m−2 and 0.29 N·m−2, respectively. (2) Due to the strongest flow disturbance and scouring effect, SS under the gravity-flow pattern was characterized by the highest loads. The lowest SS was observed during the jacking-flow pattern, which could be attributed to the lowest water level gap between the lake and external rivers. The loads ranged from 0.053 kg·m−3 to 0.068 kg·m−3. (3) Under the back-flow pattern, SS in the north lake was evidently influenced by the Yangtze River, and the mean value was approximately 0.12 kg·m−3. With the gradually weakened back-flow impact, the SS load was decreased from the north to the middle of the lake.

Numerical Solution of Melting Processes for Fixed and Unfixed Phase Change Material in the Presence of Magnetic Field: Simulation of Low Gravity Environment

2001 ◽  
Author(s):  
Y. Asako ◽  
E. Gonçalves ◽  
M. Faghri ◽  
M. Charmchi
Keyword(s):  
Magnetic Field ◽  
Natural Convection ◽  
Phase Change ◽  
Phase Change Material ◽  
Flow Patterns ◽  
Transport Processes ◽  
Low Gravity ◽  
Horizontal Magnetic Field ◽  
Wall Heating ◽  
Change Material

Abstract Transport processes associated with melting of an electrically conducting Phase Change Material (PCM), placed inside a rectangular enclosure, under low-gravity environment, and in the presence of a magnetic field is simulated numerically. Electromagnetic forces damp the natural convection as well as the flow induced by sedimentation and/or floatation, and thereby simulating the low gravity environment of outer space. Computational experiments are conducted for both side-wall heating and top-wall heating under horizontal magnetic field. The governing equations are discretized using a control-volume-based finite difference scheme. Numerical solutions are obtained for true low-gravity environment as well as for the simulated-low-gravity conditions resulted by the presence of a horizontal magnetic field. The effects of magnetic field on the natural convection, solid phase floatation/sedimentation, liquid-solid interface location, solid melting rate, and flow patterns are investigated. It is found that the melting under low-gravity environment can reasonably be simulated on earth via applying a strong horizontal magnetic field. However, the flow patterns obtained for the true low-gravity cases are not similar to the corresponding cases solved for the simulated-low-gravity environment.

Flow patterns of vertical plane thermal buoyant jet in shallow water

2018 ◽  
Vol 32 (12n13) ◽  
pp. 1840041
Author(s):  
Li-Qing Zhao ◽  
Jian-Hong Sun ◽  
Yang Lu
Keyword(s):  
Flow Pattern ◽  
Vertical Plane ◽  
Free Water ◽  
Simulation Method ◽  
Boussinesq Approximation ◽  
Flow Patterns ◽  
Buoyant Jet ◽  
Eddy Simulation ◽  
Large Eddy ◽  
Impinging Flow

A heated plane water jet impinging vertically onto free water surface has been numerically studied based on large eddy simulation method coupled with the volume of fluid approach. The Boussinesq approximation is adopted to simulate the effect of buoyancy. Results showed that there exist two flow patterns for the plane thermal buoyant jet, which are the stable impinging flow pattern and the flapping impinging flow pattern. Distinct temperature stratification can be found in the stable impinging flow pattern, while it disappears in the flapping impinging flow pattern.

Sign in / Sign up

Export Citation Format

Share Document