scholarly journals Footprints of a flapping wing

2017 ◽  
Vol 818 ◽  
pp. 1-4 ◽  
Author(s):  
Jun Zhang
Keyword(s):  
Flow Pattern ◽  
External Force ◽  
Thrust Force ◽  
Flow Patterns ◽  
Flapping Wing ◽  
Flapping Wings ◽  
Left Behind ◽  
Full Picture

Birds have to flap their wings to generate the needed thrust force, which powers them through the air. But how exactly do flapping wings create such force, and at what amplitude and frequency should they operate? These questions have been asked by many researchers. It turns out that much of the secret is hidden in the wake left behind the flapping wing. Exemplified by the study of Andersen et al. (J. Fluid Mech., vol. 812, 2017, R4), close examination of the flow pattern behind a flapping wing will inform us whether the wing is towed by an external force or able to generate a net thrust force by itself. Such studies are much like looking at the footprints of terrestrial animals as we infer their size and weight, figuring out their walking and running gaits. A map that displays the collection of flow patterns after a flapping wing, using flapping frequency and amplitude as the coordinates, offers a full picture of its flying ‘gaits’.

scholarly journals Flow Pattern Map of Flow Boiling in a Rectangular Channel Filled with Porous Media

Energies ◽  
2021 ◽  
Vol 14 (9) ◽  
pp. 2440
Author(s):  
Youngwoo Kim ◽  
Dae Yeon Kim ◽  
Kyung Chun Kim
Keyword(s):  
Porous Media ◽  
Flow Pattern ◽  
Flow Regime ◽  
Annular Flow ◽  
Flow Boiling ◽  
Rectangular Channel ◽  
Flow Patterns ◽  
Flow Pattern Map ◽  
Mist Flow ◽  
Churn Flow

A flow visualization study was carried out for flow boiling in a rectangular channel filled with and without metallic random porous media. Four main flow patterns are observed as intermittent slug-churn flow, churn-annular flow, annular-mist flow, and mist flow regimes. These flow patterns are clearly classified based on the high-speed images of the channel flow. The results of the flow pattern map according to the mass flow rate were presented using saturation temperatures and the materials of porous media as variables. As the saturation temperatures increased, the annular-mist flow regime occupied a larger area than the lower saturation temperatures condition. Therefore, the churn flow regime is narrower, and the slug flow more quickly turns to annular flow with the increasing vapor quality. The pattern map is not significantly affected by the materials of porous media.

Two-Phase Flow and Heat Transfer in Rectangular Micro-Channels

2003 ◽  
Author(s):  
Weilin Qu ◽  
Seok-Mann Yoon ◽  
Issam Mudawar
Keyword(s):  
Heat Transfer ◽  
Pressure Drop ◽  
Flow Pattern ◽  
Two Phase Flow ◽  
Flow Patterns ◽  
Heat Sinks ◽  
Phase Flow ◽  
Micro Channel ◽  
Two Phase ◽  
Micro Channels

Knowledge of flow pattern and flow pattern transitions is essential to the development of reliable predictive tools for pressure drop and heat transfer in two-phase micro-channel heat sinks. In the present study, experiments were conducted with adiabatic nitrogen-water two-phase flow in a rectangular micro-channel having a 0.406 × 2.032 mm cross-section. Superficial velocities of nitrogen and water ranged from 0.08 to 81.92 m/s and 0.04 to 10.24 m/s, respectively. Flow patterns were first identified using high-speed video imaging, and still photos were then taken for representative patterns. Results reveal that the dominant flow patterns are slug and annular, with bubbly flow occurring only occasionally; stratified and churn flow were never observed. A flow pattern map was constructed and compared with previous maps and predictions of flow pattern transition models. Annual flow is identified as the dominant flow pattern for conditions relevant to two-phase micro-channel heat sinks, and forms the basis for development of a theoretical model for both pressure drop and heat transfer in micro-channels. Features unique to two-phase micro-channel flow, such as laminar liquid and gas flows, smooth liquid-gas interface, and strong entrainment and deposition effects are incorporated into the model. The model shows good agreement with experimental data for water-cooled heat sinks.

scholarly journals Suspended sediment distribution under varied currents in the largest river-connected lake of China

2017 ◽  
Vol 18 (3) ◽  
pp. 994-1004 ◽  
Author(s):  
Hua Wang ◽  
Yijun Zhao ◽  
Fengnian Zhou ◽  
Huaiyu Yan ◽  
Yanqing Deng ◽  
...  
Keyword(s):  
Flow Pattern ◽  
Suspended Sediment ◽  
Flow Patterns ◽  
Field Investigation ◽  
Gravity Flow ◽  
Shear Stresses ◽  
Sediment Distribution ◽  
Back Flow ◽  
The North ◽  
Dry Seasons

Abstract Poyang Lake was selected as the research area. Based on laboratory experiment, field investigation and numerical simulation, the spatial distributions of suspended sediment (SS) under the gravity-flow, jacking-flow and back-flow patterns were quantitatively analysed. An annular flume experiment was conducted to determine the critical starting shear stresses of the sediments in the flood and dry seasons. By numerical experiment, the SS transport under different flow patterns was explored. Several results stand out. (1) The critical starting shear stresses of the sediments in the flood and dry seasons were 0.35 N·m−2 and 0.29 N·m−2, respectively. (2) Due to the strongest flow disturbance and scouring effect, SS under the gravity-flow pattern was characterized by the highest loads. The lowest SS was observed during the jacking-flow pattern, which could be attributed to the lowest water level gap between the lake and external rivers. The loads ranged from 0.053 kg·m−3 to 0.068 kg·m−3. (3) Under the back-flow pattern, SS in the north lake was evidently influenced by the Yangtze River, and the mean value was approximately 0.12 kg·m−3. With the gradually weakened back-flow impact, the SS load was decreased from the north to the middle of the lake.

Flow patterns of vertical plane thermal buoyant jet in shallow water

2018 ◽  
Vol 32 (12n13) ◽  
pp. 1840041
Author(s):  
Li-Qing Zhao ◽  
Jian-Hong Sun ◽  
Yang Lu
Keyword(s):  
Flow Pattern ◽  
Vertical Plane ◽  
Free Water ◽  
Simulation Method ◽  
Boussinesq Approximation ◽  
Flow Patterns ◽  
Buoyant Jet ◽  
Eddy Simulation ◽  
Large Eddy ◽  
Impinging Flow

A heated plane water jet impinging vertically onto free water surface has been numerically studied based on large eddy simulation method coupled with the volume of fluid approach. The Boussinesq approximation is adopted to simulate the effect of buoyancy. Results showed that there exist two flow patterns for the plane thermal buoyant jet, which are the stable impinging flow pattern and the flapping impinging flow pattern. Distinct temperature stratification can be found in the stable impinging flow pattern, while it disappears in the flapping impinging flow pattern.

scholarly journals NMR Analysis Method of Gas Flow Pattern in the Process of Shale Gas Depletion Development

Geofluids ◽  
2022 ◽  
Vol 2022 ◽  
pp. 1-7
Author(s):  
Rui Shen ◽  
Zhiming Hu ◽  
Xianggang Duan ◽  
Wei Sun ◽  
Wei Xiong ◽  
...  
Keyword(s):  
Flow Pattern ◽  
Pore Pressure ◽  
Shale Gas ◽  
Gas Flow ◽  
Continuous Medium ◽  
Slip Flow ◽  
Flow Patterns ◽  
Transitional Flow ◽  
Analysis Method ◽  
Adsorbed Gas

Shale gas reservoirs have pores of various sizes, in which gas flows in different patterns. The coexistence of multiple gas flow patterns is common. In order to quantitatively characterize the flow pattern in the process of shale gas depletion development, a physical simulation experiment of shale gas depletion development was designed, and a high-pressure on-line NMR analysis method of gas flow pattern in this process was proposed. The signal amplitudes of methane in pores of various sizes at different pressure levels were calculated according to the conversion relationship between the NMR T 2 relaxation time and pore radius, and then, the flow patterns of methane in pores of various sizes under different pore pressure conditions were analyzed as per the flow pattern determination criteria. It is found that there are three flow patterns in the process of shale gas depletion development, i.e., continuous medium flow, slip flow, and transitional flow, which account for 73.5%, 25.8%, and 0.7% of total gas flow, respectively. When the pore pressure is high, the continuous medium flow is dominant. With the gas production in shale reservoir, the pore pressure decreases, the Knudsen number increases, and the pore size range of slip flow zone and transitional flow zone expands. When the reservoir pressure is higher than the critical desorption pressure, the adsorbed gas is not desorbed intensively, and the produced gas is mainly free gas. When the reservoir pressure is lower than the critical desorption pressure, the adsorbed gas is gradually desorbed, and the proportion of desorbed gas in the produced gas gradually increases.

scholarly journals Flow patterns of shallow Palic Lake induced by the dominant winds

2012 ◽  
Vol 10 (1) ◽  
pp. 55-67
Author(s):  
Ljubomir Budinski ◽  
Djula Fabian
Keyword(s):  
Numerical Model ◽  
Flow Pattern ◽  
Coriolis Force ◽  
Wind Direction ◽  
Driving Forces ◽  
Open Water ◽  
Flow Patterns ◽  
Two Dimensional ◽  
Lake Model ◽  
Double Gyre

Studies of lake currents have highlighted that in case of stagnant waters winds are the dominant driving forces. This study is dealing with the influence of dominant winds on the flow pattern of Palic Lake. Action of steady winds of different directions has been tested on the lake by means of a two dimensional numerical model, while in addition to winds all other permanent factors like actual bathymetry, inflow and outflow as well the Coriolis force have been accounted for. The experiments have revealed that winds of different directions created corresponding characteristic flow patterns (in base plot), which were similar in cases of winds having opposite directions. However, in such cases the direction of flow was opposite. Moreover, the Palic Lake model produced the well known double-gyre flow pattern: in the coastal strip the direction of the current corresponded to the wind direction, while it was opposite in the domain of open water.

Flow Boiling Heat Transfer, Pressure Drop, and Flow Pattern for CO2 in a 3.5mm Horizontal Smooth Tube

2009 ◽  
Vol 131 (9) ◽  
Author(s):  
Chang Yong Park ◽  
Pega Hrnjak
Keyword(s):  
Heat Transfer ◽  
Pressure Drop ◽  
Flow Pattern ◽  
Mass Flux ◽  
Boiling Heat Transfer ◽  
Flow Boiling ◽  
Flow Patterns ◽  
Transfer Coefficients ◽  
Heat Transfer Coefficients ◽  
Flow Boiling Heat Transfer

Abstract C O 2 flow boiling heat transfer coefficients and pressure drop in a 3.5mm horizontal smooth tube are presented. Also, flow patterns were visualized and studied at adiabatic conditions in a 3mm glass tube located immediately after a heat transfer section. Heat was applied by a secondary fluid through two brass half cylinders to the test section tubes. This research was performed at evaporation temperatures of −15°C and −30°C, mass fluxes of 200kg∕m2s and 400kg∕m2s, and heat flux from 5kW∕m2 to 15kW∕m2 for vapor qualities ranging from 0.1 to 0.8. The CO2 heat transfer coefficients indicated the nucleate boiling dominant heat transfer characteristics such as the strong dependence on heat fluxes at a mass flux of 200kg∕m2s. However, enhanced convective boiling contribution was observed at 400kg∕m2s. Surface conditions for two different tubes were investigated with a profilometer, atomic force microscope, and scanning electron microscope images, and their possible effects on heat transfer are discussed. Pressure drop, measured at adiabatic conditions, increased with the increase of mass flux and quality, and with the decrease of evaporation temperature. The measured heat transfer coefficients and pressure drop were compared with general correlations. Some of these correlations showed relatively good agreements with measured values. Visualized flow patterns were compared with two flow pattern maps and the comparison showed that the flow pattern maps need improvement in the transition regions from intermittent to annular flow.

Recent progress in flapping wings for micro aerial vehicle applications

2020 ◽  
pp. 095440622091742
Author(s):  
Naeem Haider ◽  
Aamer Shahzad ◽  
Muhammad Nafees Mumtaz Qadri ◽  
Syed Irtiza Ali Shah
Keyword(s):  
Leading Edge ◽  
Flapping Wing ◽  
Flapping Wings ◽  
Structural Flexibility ◽  
Micro Aerial Vehicles ◽  
Flexible Wings ◽  
Performance Variables ◽  
Aerial Vehicles ◽  
Wide Range ◽  
Wing Geometry

Micro aerial vehicles using flapping wings are under investigation, as an alternative to fixed-wing and rotary-wing micro aerial vehicles. Such flapping-wing vehicles promise key potential advantages of high thrust, agility, and maneuverability, and have a wide range of applications. These applications include both military and commercial domains such as communication relay, search and rescue, visual reconnaissance, and field search. With the advancement in the computational sciences, developments in flapping-wing micro aerial vehicles have progressed exponentially. Such developments require a careful aerodynamic and aeroelastic design of the flapping wing. Therefore, aerodynamic tools are required to study such designs and configurations. In this paper, the role of several parameters is investigated, including the types of flapping wings, the effect of the kinematics and wing geometry (shape, configuration, and structural flexibility) on performance variables such as lift, drag, thrust, and efficiency in various modes of flight. Kinematic variables have a significant effect on the performance of the flapping wing. For instance, a high flap amplitude and pitch rotation, which supports the generation of the strong leading-edge vortex, generates higher thrust. Likewise, wing shape, configuration, and structural flexibility are shown to have a large impact on the performance of the flapping wing. The wing with optimum flexibility maximizes thrust where highly flexible wings lead to performance degradation due to change in the effective angle of attack. This study shows that the development of the flexible flapping wing with performance capabilities similar to those of natural fliers has not yet been achieved. Finally, opportunities for additional research in this field are recommended.

Detecting the Flow Pattern Transition in the Gas-Liquid Two-Phase Flow Using Multivariate Multi-Scale Entropy Analysis

2019 ◽  
Vol 74 (10) ◽  
pp. 837-848 ◽  
Author(s):  
Yudong Liu ◽  
Dayang Wang ◽  
Yingyu Ren ◽  
Ningde Jin
Keyword(s):  
Flow Pattern ◽  
Two Phase Flow ◽  
Flow Patterns ◽  
Mean Value ◽  
Entropy Rate ◽  
Permutation Entropy ◽  
Phase Flow ◽  
Two Phase ◽  
Multi Scale ◽  
Flow Pattern Transition

AbstractDue to the complex flow structure and non-uniform phase distribution in the vertical upward gas-liquid two-phase flow, an eight-electrode rotating electric field conductance sensor is used to obtain multi-channel conductance signals. The flow patterns of the vertical upward gas-liquid two-phase flow are classified according to the images obtained from a high-speed camera. Then, we employ the multivariate weighted multi-scale permutation entropy (MWMPE) to detect the instability of flow pattern transition in the gas-liquid two-phase flow. Afterwards, we compare the results of the MWMPE with those of the single-channel weighted multi-scale permutation entropy (SCWMPE) and multivariate multi-scale sample entropy (MMSE). The comparison results indicate that, compared with the SCWMPE and MMSE, the MWMPE has superior performance in terms of the high-resolution presentation of flow instability in the gas-liquid two-phase flow. Finally, we extract the mean value of the MWMPE in whole scales and the entropy rate of the MWMPE in the small scales. The results indicate that the normalized mean value and normalized entropy rate of MWMPE are very sensitive to the transitions of flow patterns, thus allowing the detection of the instability of flow pattern transition.

Sign in / Sign up

Export Citation Format

Share Document