Journal Bearings With Arbitrary Position of Source—II

1961 ◽  
Vol 83 (4) ◽  
pp. 572-578 ◽  
Author(s):  
J. V. Fedor
Keyword(s):  
Point Source ◽  
Reynolds Equation ◽  
Journal Bearing ◽  
Vertical Plane ◽  
Journal Bearings ◽  
Diameter Ratio ◽  
Source Parameter ◽  
Rapid Rise ◽  
Finite Form ◽  
Arbitrary Position

A complete oil film solution of Reynolds equation is found that takes into account the presence of a point source. The solution gives integrated journal bearing characteristics in finite form. With the load in a vertical plane and the source at the top or bottom of the bearing, two simple universal relationships have emerged between the angle indicating the line of centers (α) and the eccentricity (b). With the source at the base of the bearing and −cos α = b, the plot of coefficient of friction versus the Sommerfeld variable goes through the origin and is essentially independent of bearing length to diameter ratio. Also, lubricant end flow becomes vanishingly small as the Sommerfeld variable approaches zero. With the source at the top of the bearing a friction axis intercept can be obtained depending upon a source parameter, q. With cos α ≈ b/2, a rapid rise in the co-efficient of friction can also be simulated by properly varying the source parameter. Also, lubricant end flow increases monotonically as the Sommerfeld variable approaches zero.

First Paper: An Analytical Study of the Tilting Pad Gas Lubricated Journal Bearing

1966 ◽  
Vol 181 (1) ◽  
pp. 293-300 ◽  
Author(s):  
G. Pitts
Keyword(s):  
Analytical Solution ◽  
Analytical Study ◽  
Reynolds Equation ◽  
Journal Bearing ◽  
Journal Bearings ◽  
Diameter Ratio ◽  
Sample Design ◽  
Tilting Pad ◽  
Experimental Findings ◽  
Single Set

Presented in this paper is an analytical method of producing design curves for tilting pad gas journal bearings, with dimensionless parameters chosen in such a way that a single set of curves may be used for any size of bearing with any length to diameter ratio. An analytical solution to the compressible Reynolds equation, based on the linearization by Ausman, is presented in detail. Comparisons are made between the analytical results, numerical results, and experimental findings on the author's rig at Southampton University. Included in the paper is a sample design curve, together with equations for constructing additional curves. The author concludes by briefly outlining his proposed extension of this work.

Theoretical Condition for the Cxy=Cyx Relation in Fluid Film Journal Bearings

1989 ◽  
Vol 111 (3) ◽  
pp. 426-429 ◽  
Author(s):  
T. Kato ◽  
Y. Hori
Keyword(s):  
Reynolds Equation ◽  
Journal Bearing ◽  
Journal Bearings ◽  
Fluid Film ◽  
Finite Width ◽  
Damping Coefficients ◽  
Dynamic Coefficients ◽  
Cross Terms ◽  
Linear Damping ◽  
Theoretical Condition

A computer program for calculating dynamic coefficients of journal bearings is necessary in designing fluid film journal bearings and an accuracy of the program is sometimes checked by the relation that the cross terms of linear damping coefficients of journal bearings are equal to each other, namely “Cxy = Cyx”. However, the condition for this relation has not been clear. This paper shows that the relation “Cxy = Cyx” holds in any type of finite width journal bearing when these are calculated under the following condition: (I) The governing Reynolds equation is linear in pressure or regarded as linear in numerical calculations; (II) Film thickness is given by h = c (1 + κcosθ); and (III) Boundary condition is homogeneous such as p=0 or dp/dn=0, where n denotes a normal to the boundary.

The Effect of Lubricant Inertia in Journal-Bearing Lubrication

1957 ◽  
Vol 24 (4) ◽  
pp. 494-496
Author(s):  
J. F. Osterle ◽  
Y. T. Chou ◽  
E. A. Saibel
Keyword(s):  
Reynolds Number ◽  
Steady State ◽  
Reynolds Equation ◽  
Journal Bearing ◽  
Journal Bearings ◽  
Hydrodynamic Theory ◽  
Simple Relationship ◽  
Inertia Effect ◽  
Laminar Regime ◽  
Steady State Operation

Abstract The Reynolds equation of hydrodynamic theory, modified to take lubricant inertia into approximate account, is applied to the steady-state operation of journal bearings to determine the effect of lubricant inertia on the pressure developed in the lubricant. A simple relationship results, relating this “inertial” pressure to the Reynolds number of the flow. It is found that the inertia effect can be significant in the laminar regime.

Numerical and Experimental Investigations on Preload Effects in Air Foil Journal Bearings

2017 ◽  
Author(s):  
Marcel Mahner ◽  
Pu Li ◽  
Andreas Lehn ◽  
Bernhard Schweizer
Keyword(s):  
Reynolds Equation ◽  
Journal Bearing ◽  
Journal Bearings ◽  
Compressible Fluids ◽  
Experimental Investigations ◽  
Hysteresis Curves ◽  
Numerical Predictions ◽  
Bearing Stiffness ◽  
Gasdynamic Model ◽  
Good Agreement

A detailed elasto-gasdynamic model of a preloaded three-pad air foil journal bearing is presented. Bump and top foil deflections are herein calculated with a nonlinear beamshell theory according to Reissner. The 2D pressure distribution in each bearing pad is described by the Reynolds equation for compressible fluids. With this model, the influence of the assembly preload on the static bearing hysteresis as well as on the aerodynamic bearing performance is investigated. For the purpose of model validation, the predicted hysteresis curves are compared with measured curves. The numerically predicted and the measured hysteresis curves show a good agreement. The numerical predictions exhibit that the assembly preload increases the bearing stiffness (in particular for moderate shaft displacements) and the bearing damping.

STATIC CHARACTERISTICS OF OFFSET 8-LOBE JOURNAL BEARINGS

Tribologia ◽  
2021 ◽  
Vol 295 (1) ◽  
pp. 39-51
Author(s):  
Stanisław Strzelecki
Keyword(s):  
Laminar Flow ◽  
Equilibrium Position ◽  
Iterative Procedure ◽  
Journal Bearing ◽  
Journal Bearings ◽  
Diameter Ratio ◽  
Static Characteristics ◽  
Oil Film ◽  
Cooling Conditions ◽  
Grinding Machines

The 8-lobe journal bearings have found application in the bearing systems of spindles of grinding machines. The design of bearings and the large number of lobes and oil grooves assures good cooling conditions of bearing. These bearings can be manufactured as the bearings with cylindrical, non-continuous operating surfaces separated by six lubricating grooves, bearings with the pericycloidal shape of the bearing bore, and as offset journal bearing. This paper presents the results of the computation of static characteristics of an offset 8-lobe journal bearing operating under the conditions of an aligned axis of journal and bush, adiabatic oil film, and at the static equilibrium position of journal. Different values of bearing length to diameter ratio, relative clearance, and lobe relative clearance were assumed. Reynolds' energy and viscosity equations were solved by means of an iterative procedure. Adiabatic oil film, laminar flow in the bearing gap, and aligned orientation of journal in the bearing were considered.

Analysis of Infinitely Short and Infinitely Long Hydrodynamic Journal Bearings Under Micro-Polar Fluid by Direct Integration Method

2017 ◽  
Author(s):  
Bikash Routh
Keyword(s):  
Finite Difference ◽  
Finite Difference Method ◽  
Reynolds Equation ◽  
Journal Bearing ◽  
Integration Method ◽  
Pressure Profile ◽  
Journal Bearings ◽  
Direct Integration ◽  
Polar Fluid ◽  
Direct Integration Method

In the present paper Reynolds equation of lubrication under micro-polar fluid for journal bearing is solved by direct-integration method under infinitely long and infinitely short journal bearing assumptions [1]. Infinitely long-bearing and infinitely short bearing solutions are the two available approximate closed form solutions for journal bearings. In the present investigation, solution of Reynolds equation i.e. pressure profile is compared with pressure profile obtained by previously used approximate method like finite difference method (FDM). Mentionable here that any approximation method needs lots of calculation and computer programing to get the result. In the present work it has been found that direct-integration method leads the almost same result as the conventionally used complex finite difference method. CFD analysis is also presented in the present work to justify the profile obtained by direct numerical method. It has seen here that theoretical and simulation results are in good agreement to each other’s.

Dynamic stability of micropolar lubricated hydrodynamic offset-halves journal bearings

2020 ◽  
pp. 135065012093685
Author(s):  
Sanyam Sharma ◽  
Chimata M Krishna
Keyword(s):  
High Speed ◽  
Reynolds Equation ◽  
Journal Bearing ◽  
Critical Mass ◽  
Journal Bearings ◽  
Aspect Ratios ◽  
Input Parameters ◽  
Output Characteristics ◽  
The Stability ◽  
Offset Factor

The plain circular journal bearings are not found to be stable by researchers when used in high speed rotating machineries. Hence, extensive research in the study of stability characteristics of non-circular bearings or lobed bearings assumed importance, of late. Present article deals with the stability analysis of non-circular offset bearing by taking selected set of input and output parameters. Modified Reynolds equation for micropolar lubricated rigid journal bearing system is solved using finite element method. Two kinds of input parameters namely, offset factors (0.2, 0.4) and aspect ratios (1.6, 2.0) have been selected for the study. The important output characteristics such as load, critical mass, whirl frequency ratio, and threshold speed are computed and plotted for various set of values of input parameters. The results obtained indicate that micropolar lubricated circular offset bearing is highly stable for higher offset factor and higher aspect ratio.

Empirical Treatment of Hydrodynamic Journal Bearing Performance in the Superlaminar Regime

1970 ◽  
Vol 12 (2) ◽  
pp. 116-122 ◽  
Author(s):  
H. F. Black
Keyword(s):  
Reynolds Number ◽  
Field Equation ◽  
Experimental Work ◽  
Reynolds Equation ◽  
Pressure Field ◽  
Journal Bearing ◽  
Load Capacity ◽  
Journal Bearings ◽  
Theoretical Treatment ◽  
Hydrodynamic Journal Bearing

The application of a perturbation in terms of simple correlations for friction in turbulent Couette and ‘screw’ flows, together with a further empirical assumption consonant with the experimental work of Smith and Fuller (1), leads to a pressure field equation identical in form with the Reynolds equation. The load capacity of journal bearings throughout most of the superlaminar range may be represented by a single curve, and existing laminar solutions may be applied with the parameters modified by Reynolds number. The theory is compared with published experimental results, and with the most successful theoretical treatment (4). The correlations obtained confirm the adequacy of the theory to predict performance in the superlaminar régime.

A Numerical Solution for the Incompressible Hybrid Journal Bearing With Cavitation

1969 ◽  
Vol 91 (3) ◽  
pp. 508-515 ◽  
Author(s):  
Stanley Heller ◽  
Wilbur Shapiro
Keyword(s):  
Vapor Pressure ◽  
Pressure Gradient ◽  
Numerical Solution ◽  
Reynolds Equation ◽  
Journal Bearing ◽  
Journal Bearings ◽  
Supply Circuit ◽  
Hydrodynamic Bearing

A numerical solution is presented for determining performance for hybrid journal bearings with arbitrary clearance distribution and cavitation. Regions of cavitation are determined by solution of the incompressible Reynolds’ equation. The pressures in the cavitated regions are immediately adjusted to a specified vapor pressure with zero pressure gradient. The continuity of mass equation permits coupling the influence of the external supply circuit and the methods of recess compensation to the Reynolds’ equation. Results are presented for geometrically similar hydrodynamic, hydrostatic, and hybrid bearings. Favorable comparisons are made with previously published results for the hydrodynamic bearing.

A Contribution to the Analysis of the Thermo-Hydrodynamic Lubrication of Porous Self-Lubricating Journal Bearings

2010 ◽  
Vol 297-301 ◽  
pp. 618-623 ◽  
Author(s):  
S. Boubendir ◽  
Salah Larbi ◽  
Rachid Bennacer
Keyword(s):  
Thermal Effects ◽  
Reynolds Equation ◽  
Journal Bearing ◽  
Hydrodynamic Lubrication ◽  
Load Capacity ◽  
Porous Matrix ◽  
Journal Bearings ◽  
Governing Equations ◽  
Hydrodynamic Analysis ◽  
Result Show

In this work the influence of thermal effects on the performance of a finite porous journal bearing has been investigated using a thermo-hydrodynamic analysis. The Reynolds equation of thin viscous films is modified taking into account the oil leakage into the porous matrix, by applying Darcy’s law to determine the fluid flow in the porous media. The governing equations were solved numerically using the finite difference approach. Obtained result show a reduction in the performance of journal bearings when the thermal effects are accounted for and, this reduction is greater when the load capacity is significant.

Sign in / Sign up

Export Citation Format

Share Document