The Effect of Lubricant Inertia in Journal-Bearing Lubrication

1957 ◽  
Vol 24 (4) ◽  
pp. 494-496
Author(s):  
J. F. Osterle ◽  
Y. T. Chou ◽  
E. A. Saibel
Keyword(s):  
Reynolds Number ◽  
Steady State ◽  
Reynolds Equation ◽  
Journal Bearing ◽  
Journal Bearings ◽  
Hydrodynamic Theory ◽  
Simple Relationship ◽  
Inertia Effect ◽  
Laminar Regime ◽  
Steady State Operation

Abstract The Reynolds equation of hydrodynamic theory, modified to take lubricant inertia into approximate account, is applied to the steady-state operation of journal bearings to determine the effect of lubricant inertia on the pressure developed in the lubricant. A simple relationship results, relating this “inertial” pressure to the Reynolds number of the flow. It is found that the inertia effect can be significant in the laminar regime.

Temporal and Convective Inertia Effects in Plain Journal Bearings With Eccentricity, Velocity and Acceleration

2011 ◽  
Author(s):  
Saeid Dousti ◽  
Jianming Cao ◽  
Amir Younan ◽  
Paul Allaire ◽  
Tim Dimond
Keyword(s):  
Reynolds Number ◽  
Reynolds Equation ◽  
Journal Bearing ◽  
Journal Bearings ◽  
Fluid Film ◽  
Navier Stokes ◽  
Inertia Effect ◽  
Inertia Effects ◽  
Low Viscosity ◽  
Fluid Film Bearings

Fluid film bearings are commonly analyzed with the conventional Reynolds equation, without any temporal inertia effects, developed for oil or other high viscosity lubricants. In applications with rapidly time varying external loads, e.g. ships on wavy oceans, temporal inertia effect should be taken into account. As rotating speeds increase in industrial machines and the reduced Reynolds number increases above the turbulent threshold, a form of linearized turbulence model is often used to increase the effective viscosity to take the turbulence into account. Other than the turbulence effect, with high reduced Reynolds number, convective inertia effect gains importance. Water or other low viscosity fluid film bearings used in subsea machines and compressors are potential applications with a highly reduced Reynolds number.” This paper extends the theory originally developed by Tichy [1] for impulsive loads to high reduced Reynolds number lubrication in different bearing configurations. Both fluid shear and pressure gradient terms are included in the velocity profiles across the lubricant film. The incompressible continuity equation and Navier Stokes equations, including the temporal inertia term, are simplified using an averaged velocity approach to obtain an extended form of Reynolds equation which applies to both laminar and turbulent flow. All terms in the Navier Stokes equation, including both the convective and temporal inertia terms are included in the analysis. The inclusion of the temporal inertia term creates a fluid acceleration term in the extended Reynolds equation. A primary advantage of this formulation is that fluid film bearings lubricated with low viscosity lubricants which are subject to high force slew rates can be analyzed with this extended Reynolds equation. A short bearing form of the extended Reynolds equation is developed with appropriate boundary conditions. A full kinematic analysis of the short journal bearing is developed including time derivatives up to and including shaft accelerations. Linearized stiffness, damping and mass coefficients are developed for a plain short journal bearing. A time transient solution is developed for the pressure and bearing loads in plain journal bearings supporting a symmetric rigid rotor when the rotor is subjected to rapidly applied large forces. The change in the rotor displacements when subjected to unbalance forces is explored. Several comparisons between conventional Reynolds equation solutions and the extended Reynolds number form with temporal inertia effects will be presented and discussed.

Empirical Treatment of Hydrodynamic Journal Bearing Performance in the Superlaminar Regime

1970 ◽  
Vol 12 (2) ◽  
pp. 116-122 ◽  
Author(s):  
H. F. Black
Keyword(s):  
Reynolds Number ◽  
Field Equation ◽  
Experimental Work ◽  
Reynolds Equation ◽  
Pressure Field ◽  
Journal Bearing ◽  
Load Capacity ◽  
Journal Bearings ◽  
Theoretical Treatment ◽  
Hydrodynamic Journal Bearing

The application of a perturbation in terms of simple correlations for friction in turbulent Couette and ‘screw’ flows, together with a further empirical assumption consonant with the experimental work of Smith and Fuller (1), leads to a pressure field equation identical in form with the Reynolds equation. The load capacity of journal bearings throughout most of the superlaminar range may be represented by a single curve, and existing laminar solutions may be applied with the parameters modified by Reynolds number. The theory is compared with published experimental results, and with the most successful theoretical treatment (4). The correlations obtained confirm the adequacy of the theory to predict performance in the superlaminar régime.

Inertia Effect in Hydrodynamic Lubrication With Film Rupture

1987 ◽  
Vol 109 (1) ◽  
pp. 86-90 ◽  
Author(s):  
H. I. You ◽  
S. S. Lu
Keyword(s):  
Reynolds Number ◽  
Reynolds Equation ◽  
Journal Bearing ◽  
Hydrodynamic Lubrication ◽  
Inertia Effect ◽  
Fluid Inertia ◽  
Film Rupture ◽  
Minimum Film Thickness ◽  
Rupture Model ◽  
Modified Reynolds Equation

The modified Reynolds equation in conjunction with the modified Coyne-Elrod rupture model is used to investigate the inertia effect on the pressure distribution in converging-diverging bearings. The modified Reynolds equation is solved analytically for infinitely long bearings, including the cylinder-plane bearing and the journal bearing. The results showed that the fluid inertia tends to stretch the fluid film and to move the film rupture point farther downstream. The effects are profound even at a moderate value of the reduced Reynolds number, Re* ≈ 0.13 based on the minimum film thickness.

A Generalized Steady-State Reynolds Equation for Non-Newtonian Fluids, With Application to Journal Bearings

1983 ◽  
Vol 105 (3) ◽  
pp. 385-390 ◽  
Author(s):  
I. K. Dien ◽  
H. G. Elrod
Keyword(s):  
Steady State ◽  
Power Law ◽  
Reynolds Equation ◽  
Journal Bearing ◽  
Journal Bearings ◽  
Newtonian Fluids ◽  
Constant Property ◽  
Fluid Characteristics

The purpose of this paper is to derive lubrication equations suitable for constant-property fluids exhibiting inelastic non-Newtonian characteristics. The analysis results in a slightly modified form of Reynolds equation. Fluid characteristics show up in this equation through an equivalent power-law. Data are presented for journal bearing performance over a range of L/D’s and rheological exponents.

Use of computational fluid dynamics in hydrodynamic lubrication

1998 ◽  
Vol 212 (6) ◽  
pp. 427-436 ◽  
Author(s):  
P. Y. P. Chen ◽  
E. J. Hahn
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Steady State ◽  
Reynolds Equation ◽  
Hydrodynamic Lubrication ◽  
Journal Bearings ◽  
Negligible Effect ◽  
Squeeze Film ◽  
Inertia Effect ◽  
Squeeze Film Dampers

This paper demonstrates the suitability of using computational fluid dynamics software for solving steady state hydrodynamic lubrication problems pertaining to slider bearings, step bearings, journal bearings and squeeze-film dampers under conditions of constant unidirectional or rotating loading. The relevance of the inertia and viscous terms which are neglected in the derivation of the Reynolds equation are briefly investigated for the above bearing and damper configurations and it is shown that the neglected viscous terms have negligible effect whereas the inertia effect predictions agree reasonably well with those reported in the literature.

Theoretical Condition for the Cxy=Cyx Relation in Fluid Film Journal Bearings

1989 ◽  
Vol 111 (3) ◽  
pp. 426-429 ◽  
Author(s):  
T. Kato ◽  
Y. Hori
Keyword(s):  
Reynolds Equation ◽  
Journal Bearing ◽  
Journal Bearings ◽  
Fluid Film ◽  
Finite Width ◽  
Damping Coefficients ◽  
Dynamic Coefficients ◽  
Cross Terms ◽  
Linear Damping ◽  
Theoretical Condition

A computer program for calculating dynamic coefficients of journal bearings is necessary in designing fluid film journal bearings and an accuracy of the program is sometimes checked by the relation that the cross terms of linear damping coefficients of journal bearings are equal to each other, namely “Cxy = Cyx”. However, the condition for this relation has not been clear. This paper shows that the relation “Cxy = Cyx” holds in any type of finite width journal bearing when these are calculated under the following condition: (I) The governing Reynolds equation is linear in pressure or regarded as linear in numerical calculations; (II) Film thickness is given by h = c (1 + κcosθ); and (III) Boundary condition is homogeneous such as p=0 or dp/dn=0, where n denotes a normal to the boundary.

Numerical and Experimental Investigations on Preload Effects in Air Foil Journal Bearings

2017 ◽  
Author(s):  
Marcel Mahner ◽  
Pu Li ◽  
Andreas Lehn ◽  
Bernhard Schweizer
Keyword(s):  
Reynolds Equation ◽  
Journal Bearing ◽  
Journal Bearings ◽  
Compressible Fluids ◽  
Experimental Investigations ◽  
Hysteresis Curves ◽  
Numerical Predictions ◽  
Bearing Stiffness ◽  
Gasdynamic Model ◽  
Good Agreement

A detailed elasto-gasdynamic model of a preloaded three-pad air foil journal bearing is presented. Bump and top foil deflections are herein calculated with a nonlinear beamshell theory according to Reissner. The 2D pressure distribution in each bearing pad is described by the Reynolds equation for compressible fluids. With this model, the influence of the assembly preload on the static bearing hysteresis as well as on the aerodynamic bearing performance is investigated. For the purpose of model validation, the predicted hysteresis curves are compared with measured curves. The numerically predicted and the measured hysteresis curves show a good agreement. The numerical predictions exhibit that the assembly preload increases the bearing stiffness (in particular for moderate shaft displacements) and the bearing damping.

Numerical study on steady state performance enhancement of partial textured hydrodynamic journal bearing

2019 ◽  
Vol 71 (9) ◽  
pp. 1055-1063 ◽  
Author(s):  
Sanjay Sharma ◽  
Gourav Jamwal ◽  
R.K. Awasthi
Keyword(s):  
Steady State ◽  
Journal Bearing ◽  
Performance Enhancement ◽  
Surface Texturing ◽  
Journal Bearings ◽  
Enhancement Ratio ◽  
Content Type ◽  
Maximum Value ◽  
Static Performance ◽  
Hydrodynamic Journal Bearing

Purpose The purpose of this paper is to provide the various steady state parameters of hydrodynamic journal bearings have been determined to get maximum performance enhancement ratio. For this, the bearings inner surface is textured with triangular shape with different texture depths and a number of textures in pressure increasing region. The textured region acts as a lubricant reservoir, which provides additional film-thickness and reduce friction. Therefore, enhance the overall performance of bearing. Design/methodology/approach In the present study, the effect of triangular shaped texture on the static performance characteristics of a hydrodynamic journal bearing has been studied. Different values of texture depths and a number of textures have been numerically simulated in pressure developing region. The static performance characteristics have been calculated by solving the fluid flow governing Reynolds equation using the finite element method, assuming iso-viscous Newtonian fluid. The performance enhancement ratio, which is the ratio of load carrying capacity (LCC) to the coefficient of friction (COF) has been calculated from results to finalized optimum design parameters. Findings The paper provides numerically obtained results indicate that surface texturing can improve bearing performance if the textured region is placed in the pressure increasing region. Moreover, surface texturing is the most effective at bearing performance enhancement when the bearing operates at lower eccentricity ratios and texture depth. The performance enhancement ratio, which is the ratio of LCC to the COF is found to be a maximum value of 2.198 at texture depth of 1.5, eccentricity ratio of 0.2 and the textured region located in the increasing pressure region. Research limitations/implications The present study is based on a numerical based research approach, which has its limitations. So, researchers are encouraged to investigate the same work experimentally. Practical implications The paper includes implications to be beneficial for designers for designing better hydrodynamic journal bearings. Originality/value For the triangular shaped texture, considered in the present study, the optimum values of texture depth and texture distribution region have also been determined. While designing, designers should focus on those values of texture depth, texture region and a number of textures, which give the maximum value of performance enhancement ratio, which represents maximum LCC at the lowest value of the COF.

Steady-State and Dynamic Behaviour of Multi-Recess Hybrid Oil Journal Bearings

1979 ◽  
Vol 21 (5) ◽  
pp. 345-351 ◽  
Author(s):  
M. K. Ghosh ◽  
B. C. Majumdar ◽  
J. S. Rao
Keyword(s):  
Perturbation Theory ◽  
Steady State ◽  
Theoretical Analysis ◽  
Dynamic Behaviour ◽  
Journal Bearing ◽  
Load Capacity ◽  
Journal Bearings ◽  
Time Dependent ◽  
Damping Coefficients ◽  
Stiffness And Damping

A theoretical analysis of the steady-state and dynamic characteristics of multi-recess hybrid oil journal bearings is presented. A perturbation theory for small vibrations is used to solve an incompressible, finite journal bearing with a time-dependent term. Load capacity, attitude angle, friction parameter, stiffness and damping coefficients are evaluated for a capillary-compensated bearing.

Analysis of Infinitely Short and Infinitely Long Hydrodynamic Journal Bearings Under Micro-Polar Fluid by Direct Integration Method

2017 ◽  
Author(s):  
Bikash Routh
Keyword(s):  
Finite Difference ◽  
Finite Difference Method ◽  
Reynolds Equation ◽  
Journal Bearing ◽  
Integration Method ◽  
Pressure Profile ◽  
Journal Bearings ◽  
Direct Integration ◽  
Polar Fluid ◽  
Direct Integration Method

In the present paper Reynolds equation of lubrication under micro-polar fluid for journal bearing is solved by direct-integration method under infinitely long and infinitely short journal bearing assumptions [1]. Infinitely long-bearing and infinitely short bearing solutions are the two available approximate closed form solutions for journal bearings. In the present investigation, solution of Reynolds equation i.e. pressure profile is compared with pressure profile obtained by previously used approximate method like finite difference method (FDM). Mentionable here that any approximation method needs lots of calculation and computer programing to get the result. In the present work it has been found that direct-integration method leads the almost same result as the conventionally used complex finite difference method. CFD analysis is also presented in the present work to justify the profile obtained by direct numerical method. It has seen here that theoretical and simulation results are in good agreement to each other’s.

Sign in / Sign up

Export Citation Format

Share Document