A Moving Base Simulator Investigation of Effects of a Yaw Stability System Caused by a Side Impact

Author(s):  
Anders Andersson ◽  
Jonas Jansson

The main objective of this study was to investigate how an electronic stability control (ESC) system may aid the driver in a critical sideswipe accident. Another objective was to investigate the possibility of having a realistic simulation of a sideswipe accident in a large moving base simulator. The experiment can be divided into two parts. In part one, the driver is unaware of the sudden side impact and in part two, the side impact was repeated six times. The experiment was driven by 18 persons. With the ESC system active no driver lost control, while with the system inactive there were five drivers that lost control in part one. In part two, the ESC system showed to stabilize the vehicle faster, and the improvement in stabilization time was between 40% and 62%. It was also seen that 2% loss of control occurred with an ESC system active and 45% without.

Author(s):  
Nicholas S. Johnson ◽  
Hampton C. Gabler

Electronic stability control (ESC) is a vehicle safety system designed to keep vehicles moving in the direction commanded by the driver and thereby prevent loss-of-control crashes. Previous research has shown that ESC has been highly effective at reducing road departures related to loss of control. ESC is mandatory in all U.S. passenger vehicles manufactured from model year 2012 onward; by a 2014 estimate, ESC is in approximately one-third of passenger vehicles on the road. The proliferation of ESC may therefore alter benefit-to-cost ratios for roadside barriers. The objective of this analysis was to determine the effect of ESC on fatal crashes with roadside barriers. This objective was a first step toward determining whether ESC reduced the overall rate of crashes with roadside barriers and whether ESC had any effect on impact conditions or injury outcomes in barrier crashes. For cars, ESC reduced the odds of fatal crashes with roadside barriers by about 50% and reduced the odds of fatal rollovers that occurred in association with roadside barriers by about 45%. For light trucks and vans, ESC reduced barrier fatality odds by about 40% and barrier-associated rollover fatality odds by about 55%. By 2028, when an estimated 75% of passenger vehicles will have electronic stability control, ESC will have the potential to prevent about 410 out of an estimated 1,180 possible barrier-related fatalities per year. In the long term, once installed in every U.S. passenger vehicle, ESC could prevent about 550 of those same 1,180 possible barrier-related fatalities each year.


2014 ◽  
Vol 663 ◽  
pp. 127-134 ◽  
Author(s):  
M.H. Che Hasan ◽  
Y.M. Sam ◽  
Ke Mao Peng ◽  
Muhamad Khairi Aripin ◽  
Muhamad Fahezal Ismail

In this paper, Composite Nonlinear Feedback (CNF) is applied on Active Front Steering (AFS) system for vehicle yaw stability control in order to have an excellent transient response performance. The control method, which has linear and nonlinear parts that work concurrently capable to track reference signal very fast with minimum overshoot, fast settling time, and without exceed nature of actuator saturation limit. Beside, modelling of 7 degree of freedom for typical passenger car with magic formula to represent tyre nonlinearity behaviour is also presented to simulate controlled vehicle as close as possible with a real situation. An extensive computer simulation is performed with considering a various profile of cornering manoeuvres with external disturbance to evaluate its performance in different scenarios. The performance of the proposed controller is compared to conventional Proportional Integration and Derivative (PID) for effectiveness analysis.


Author(s):  
Ozan Temiz ◽  
Melih Cakmakci ◽  
Yildiray Yildiz

This paper presents an integrated fault-tolerant adaptive control allocation strategy for four wheel frive - four wheel steering ground vehicles to increase yaw stability. Conventionally, control of brakes, motors and steering angles are handled separately. In this study, these actuators are controlled simultaneously using an adaptive control allocation strategy. The overall structure consists of two steps: At the first level, virtual control input consisting of the desired traction force, the desired moment correction and the required lateral force correction to maintain driver’s intention are calculated based on the driver’s steering and throttle input and vehicle’s side slip angle. Then, the allocation module determines the traction forces at each wheel, front steering angle correction and rear steering wheel angle, based on the virtual control input. Proposed strategy is validated using a non-linear three degree of freedom reduced two-track vehicle model and results demonstrate that the vehicle can successfully follow the reference motion while protecting yaw stability, even in the cases of device failure and changed road conditions.


Sign in / Sign up

Export Citation Format

Share Document