A Unified Theory for the Finitely and Infinitesimally Separated Position Problems of Kinematic Synthesis

1969 ◽  
Vol 91 (1) ◽  
pp. 203-208 ◽  
Author(s):  
P. Chen ◽  
B. Roth
Keyword(s):  
Rigid Body ◽  
Companion Paper ◽  
Unified Theory ◽  
Kinematic Synthesis ◽  
Special Points ◽  
General Method

A rigid body is studied in a series of different positions. These positions can be finitely separated, infinitesimally separated, or a combination of the two. A general method for determining the locations of points or lines (in the rigid body) which have their different multiple positions satisfying the constraints of binary links or combined link chains is developed. In a companion paper [10] equations governing the locations of these special points and lines are derived.

The Kinematics of Motion Through Finitely Separated Positions

1967 ◽  
Vol 34 (3) ◽  
pp. 591-598 ◽  
Author(s):  
Bernard Roth
Keyword(s):  
General Theory ◽  
Rigid Body ◽  
Numerical Evaluation ◽  
Companion Paper ◽  
Numerical Examples ◽  
Circle Plane ◽  
Spatial Linkages ◽  
Special Points

A rigid body is studied in a series of finitely separated positions, in order to determine those points which lie on a special locus (a sphere, circle, plane, line, or cylinder). Equations governing these special points are derived and their numerical evaluation is discussed. Several numerical examples are presented. In a companion paper [21], these results are applied to the synthesis of spatial linkages, and special motions (e.g., planer and spherical) are incorporated into the general theory presented herein.

scholarly journals Kinematic synthesis of planar, shape-changing, rigid body mechanisms for design profiles with significant differences in arc length

2013 ◽  
Vol 70 ◽  
pp. 425-440 ◽  
Author(s):  
Shamsul A. Shamsudin ◽  
Andrew P. Murray ◽  
David H. Myszka ◽  
James P. Schmiedeler
Keyword(s):  
Rigid Body ◽  
Arc Length ◽  
Kinematic Synthesis ◽  
Planar Shape

Kinematic Synthesis of a D-Drive MEMS Device With Rigid-Body Replacement Method

2018 ◽  
Vol 140 (7) ◽  
Author(s):  
Paolo Sanò ◽  
Matteo Verotti ◽  
Paolo Bosetti ◽  
Nicola P. Belfiore
Keyword(s):  
Rigid Body ◽  
Experimental Testing ◽  
Micro Electro Mechanical System ◽  
Element Analysis ◽  
Kinematic Synthesis ◽  
Replacement Method ◽  
Rigid Body Model ◽  
Mems Device ◽  
Conjugate Surfaces ◽  
Line Path

In this paper, a microsystem with prescribed functional capabilities is designed and simulated. In particular, the development of a straight line path generator micro electro mechanical system (MEMS) device is presented. A new procedure is suggested for avoiding branch or circuit problems in the kinematic synthesis problem. Then, Ball's point detection is used to validate the obtained pseudo-rigid body model (PRBM). A compliant MEMS device is obtained from the PRBM through the rigid-body replacement method by making use of conjugate surfaces flexure hinges (CSFHs). Finally, the functional capability of the device is investigated by means of finite element analysis (FEA) simulations and experimental testing at the macroscale.

Conditions for the planes of symmetry of an elastically supported rigid body

2009 ◽  
Vol 223 (8) ◽  
pp. 1755-1766 ◽  
Author(s):  
S J Jang ◽  
Y J Choi
Keyword(s):  
Rigid Body ◽  
Eigenvalue Problems ◽  
Mass Matrix ◽  
Equations Of Motion ◽  
Mass Matrices ◽  
Out Of Plane ◽  
Modes Of Vibration ◽  
Compliance Matrices ◽  
Special Points ◽  
Elastically Supported

Introducing the planes of symmetry into an oscillating rigid body suspended by springs simplifies the complexity of the equations of motion and decouples the modes of vibration into in-plane and out-of-plane modes. There have been some research results from the investigation into the conditions for planes of symmetry in which prior conditions for the simplification of the equations of motion are required. In this article, the conditions for the planes of symmetry that do not need prior conditions for simplification are presented. The conditions are derived from direct expansions of eigenvalue problems for stiffness and mass matrices that are expressed in terms of in-plane and out-of-plane modes and the orthogonality condition with respect to the mass matrix. Two special points, the planar couple point and the perpendicular translation point are identified, where the expressions for stiffness and compliance matrices can be greatly simplified. The simplified expressions are utilized to obtain the analytical expressions for the axes of vibration of a vibration system with planes of symmetry.

scholarly journals Planar dynamics of a rigid body system with frictional impacts. II. Qualitative analysis and numerical simulations

2009 ◽  
Vol 465 (2107) ◽  
pp. 2267-2292 ◽  
Author(s):  
Zhen Zhao ◽  
Caishan Liu ◽  
Bernard Brogliato
Keyword(s):  
Qualitative Analysis ◽  
Rigid Body ◽  
Numerical Simulations ◽  
Contact Point ◽  
Impulsive Differential Equations ◽  
Companion Paper ◽  
Rigid Body Dynamics ◽  
Drift Motion ◽  
Contact Points ◽  
Static Coefficient Of Friction

The objective of this paper is to implement and test the theory presented in a companion paper for the non-smooth dynamics exhibited in a bouncing dimer. Our approach revolves around the use of rigid body dynamics theory combined with constraint equations from the Coulomb's frictional law and the complementarity condition to identify the contact status of each contacting point. A set of impulsive differential equations based on Darboux–Keller shock dynamics is established that can deal with the complex behaviours involved in multiple collisions, such as the frictional effects, the local dissipation of energy at each contact point, and the dispersion of energy among various contact points. The paper will revisit the experimental phenomena found in Dorbolo et al . ( Dorbolo et al . 2005 Phys. Rev. Lett. 95 , 044101), and then present a qualitative analysis based on the theory proposed in part I. The value of the static coefficient of friction between the plate and the dimer is successfully estimated, and found to be responsible for the formation of the drift motion of the bouncing dimer. Plenty of numerical simulations are carried out, and precise agreements are obtained by the comparisons with the experimental results.

Design of a Continuum Mechanism that Matches the Movement of an Eight-bar Linkage

2020 ◽  
pp. 1-11
Author(s):  
Xueao Liu ◽  
J. Michael McCarthy
Keyword(s):  
Finite Element Analysis ◽  
Rigid Body ◽  
Design Methodology ◽  
Compliant Mechanisms ◽  
Compliant Mechanism ◽  
Initial Structure ◽  
Element Analysis ◽  
Kinematic Synthesis ◽  
Generic Structure ◽  
Straight Line

Abstract This paper presents a design methodology for mechanisms consisting of a single continuous structure, continuum mechanisms, that blends the kinematic synthesis of rigid-body mechanisms with topology optimization for compliant mechanisms. Rather than start with a generic structure that is shaped to achieve a required force deflection task for a compliant mechanism, our approach shapes the initial structure based on kinematic synthesis of a rigid body mechanism for the required movement, then the structure is shaped using Finite Element Analysis to achieve the required force deflection relationship. The result of this approach is a continuum mechanism with the same workpiece movement as the rigid link mechanism when actuated. An example illustrates the design process to obtain an eight-bar linkage that guides its workpiece in straight-line rectilinear movement. We show that the resulting continuum mechanism provides the desired rectilinear movement. A 210 mm physical model machined from Nylon-6 is shown to achieve 21.5mm rectilinear movement with no perceived deviation from a straight-line.

Software for the Kinematic Synthesis of Coupler-Driven Spherical Four-Bar Mechanisms

2007 ◽  
Author(s):  
Eric M. Grimm ◽  
Andrew P. Murray ◽  
Michael L. Turner
Keyword(s):  
Rigid Body ◽  
Kinematic Synthesis ◽  
Prismatic Joint ◽  
Second Stage ◽  
Typical Scheme ◽  
Four Bar Linkage

A spatial analogue of the Stephenson III six-bar mechanism can be formed by the connection of an SPS chain to the coupler of a spherical four-bar linkage. With the prismatic joint actuated, the spherical four-bar is driven via a force applied directly to the coupler. This linkage is termed the coupler-driven spherical four-bar mechanism, and defines an alternative to the typical scheme of actuating the four-bar via a torque applied at the input link. This paper presents software developed to assist in the kinematic synthesis of these mechanisms. In the first stage of the design, a circuit-defect free spherical four-bar is dimensioned with the capacity to guide a rigid body through two orientations. The second stage of the design is to locate the SPS leg such that the four-bar is smoothly drivable between the orientations.

Geometric Design of Spherical Serial Chains With Curvature Constraints in the Environment

2011 ◽  
Author(s):  
Nina Robson ◽  
Anurag Tolety
Keyword(s):  
Rigid Body ◽  
Robot Manipulator ◽  
Normal Direction ◽  
Geometric Design ◽  
Failure Recovery ◽  
Kinematic Synthesis ◽  
Synthesis Techniques ◽  
Moving Body ◽  
Trajectory Interpolation ◽  
Serial Chains

This paper builds up on recent results on planar kinematic synthesis with contact direction and curvature constraints on the workpiece. We consider the synthesis of spherical serial chains to guide a rigid body, such that it does not violate normal direction and curvature constraints imposed by contact with objects in the environment. We show how to derive these constraints from the geometry of the task and transform them into conditions on velocity and acceleration of points in the moving body to obtain synthesis equations which can be solved by algebraic elimination. Trajectory interpolation formulas yield the movement of the chain with the desired contact properties in each of the task positions. An example shows the application of the developed theory to the failure recovery of a robot manipulator, using kinematic synthesis techniques.

Sign in / Sign up

Export Citation Format

Share Document