An Analysis of the Squeeze Film Between Porous Rectangular Plates

1972 ◽  
Vol 94 (1) ◽  
pp. 64-68 ◽  
Author(s):  
Hai Wu
Keyword(s):  
Film Thickness ◽  
Pressure Distribution ◽  
Laplace Equation ◽  
Carrying Capacity ◽  
Reynolds Equation ◽  
Squeeze Film ◽  
Load Carrying Capacity ◽  
Rectangular Plates ◽  
Load Carrying ◽  
In Series

The squeeze film between two rectangular plates when one has a porous facing is studied theoretically. The problem is described by the modified Reynolds equation in the film region and the Laplace equation in the porous region. Results are presented for pressure distribution, load-carrying capacity, and film thickness as functions of time in series form. The effect of the porous facing on the squeeze film behavior is discussed and found to be important.

Squeeze-Film Behavior for Porous Annular Disks

1970 ◽  
Vol 92 (4) ◽  
pp. 593-596 ◽  
Author(s):  
Hai Wu
Keyword(s):  
Film Thickness ◽  
Pressure Distribution ◽  
Carrying Capacity ◽  
Squeeze Film ◽  
Load Carrying Capacity ◽  
Load Carrying ◽  
Annular Disks

An analysis is made of the squeeze-film behavior between two annular disks when one disk has a porous facing. The problem is solved analytically. Results are presented for pressure distribution, load-carrying capacity, and film thickness as functions of time.

scholarly journals Thrust Porous Bearing with Rough Surfaces Lubricated by a Rotem-Shinnar Fluid

2016 ◽  
Vol 10 (1) ◽  
pp. 50-55 ◽  
Author(s):  
Anna Walicka ◽  
Edward Walicki
Keyword(s):  
Pressure Distribution ◽  
Carrying Capacity ◽  
Reynolds Equation ◽  
Hydrodynamic Lubrication ◽  
Equations Of Motion ◽  
Squeeze Film ◽  
Load Carrying Capacity ◽  
Porous Bearing ◽  
Load Carrying ◽  
Plastic Fluid

Abstract In the paper the influence of both bearing surfaces roughness and porosity of one bearing surface on the pressure distribution and load-carrying capacity of a thrust bearing surfaces is discussed. The equations of motion of a pseudo-plastic fluid of Rotem-Shinnar, are used to derive the Reynolds equation. After general considerations on the flow in a bearing clearance and in a porous layer using the Morgan-Cameron approximation and Christensen theory of hydrodynamic lubrication the modified Reynolds equation is obtained. The analytical solutions of this equation for the cases of squeeze film bearing and externally pressurized bearing are presented. As a result one obtains the formulae expressing pressure distribution and load-carrying capacity. Thrust radial bearing with squeezed film is considered as a numerical example.

Axial Current Induced Pinch Effect on the Squeeze-Film Behavior for Porous Annular Disks

1975 ◽  
Vol 97 (1) ◽  
pp. 130-133 ◽  
Author(s):  
J. L. Gupta ◽  
P. C. Sinha
Keyword(s):  
Film Thickness ◽  
Pressure Distribution ◽  
Carrying Capacity ◽  
Axial Current ◽  
Squeeze Film ◽  
Load Carrying Capacity ◽  
Pinch Effect ◽  
Load Carrying ◽  
Lower Disk ◽  
Annular Disks

An analysis of the effect of axial current induced pinch on the squeeze-film behavior between two annular disks, when the upper disk which has a porous facing and is parallel to the stationary nonporous disk moves normal to itself approaching the lower disk, is presented. The analytical results for the pressure distribution, load-carrying capacity, and the film thickness as a function of time are obtained and the effect of pinch on these quantities is studied. It is found that a load proportional to the square of the axial current can be sustained even when there is no flow.

scholarly journals Thrust Bearing with Rough Surfaces Lubricated by an Ellis Fluid

2014 ◽  
Vol 19 (4) ◽  
pp. 809-822
Author(s):  
A. Walicka ◽  
E. Walicki ◽  
P. Jurczak ◽  
J. Falicki
Keyword(s):  
Pressure Distribution ◽  
Analytical Solutions ◽  
Carrying Capacity ◽  
Reynolds Equation ◽  
Thrust Bearing ◽  
Equations Of Motion ◽  
Squeeze Film ◽  
Load Carrying Capacity ◽  
Load Carrying ◽  
Plastic Fluid

Abstract In the paper the influence of bearing surfaces roughness on the pressure distribution and load-carrying capacity of a thrust bearing is discussed. The equations of motion of an Ellis pseudo-plastic fluid are used to derive the Reynolds equation. After general considerations on the flow in a bearing clearance and using the Christensen theory of hydrodynamic rough lubrication the modified Reynolds equation is obtained. The analytical solutions of this equation for the cases of a squeeze film bearing and an externally pressurized bearing are presented. As a result one obtains the formulae expressing pressure distribution and load-carrying capacity. A thrust radial bearing is considered as a numerical example.

scholarly journals Porous Squeeze Film Bearing with Rough Surfaces Lubricated by a Bingham Fluid

2014 ◽  
Vol 19 (4) ◽  
pp. 795-808
Author(s):  
A. Walicka ◽  
E. Walicki ◽  
P. Jurczak ◽  
J. Falicki
Keyword(s):  
Pressure Distribution ◽  
Analytical Solutions ◽  
Carrying Capacity ◽  
Reynolds Equation ◽  
Equations Of Motion ◽  
Bingham Fluid ◽  
Squeeze Film ◽  
Load Carrying Capacity ◽  
Bearing Surface ◽  
Load Carrying

Abstract In the paper the effect of both bearing surfaces and the porosity of one bearing surface on the pressure distribution and load-carrying capacity of a squeeze film bearing is discussed. The equations of motion of a Bingham fluid in a bearing clearance and in a porous layer are presented. Using the Morgan-Cameron approximation and Christensen theory of rough lubrication the modified Reynolds equation is obtained. The analytical solutions of this equation for a squeeze film bearing are presented. As a result one obtains the formulae expressing pressure distribution and load-carrying capacity. A thrust radial bearing is considered as a numerical example.

Effect of viscosity variation on non-Newtonian lubrication of squeeze film conical bearing having porous wall operating with Rabinowitsch fluid model

2018 ◽  
Vol 233 (7) ◽  
pp. 2538-2551 ◽  
Author(s):  
Pentyala Srinivasa Rao ◽  
Amit Kumar Rahul
Keyword(s):  
Carrying Capacity ◽  
Reynolds Equation ◽  
Porous Wall ◽  
Squeeze Film ◽  
Load Carrying Capacity ◽  
Film Pressure ◽  
Pressure Load ◽  
Load Carrying ◽  
Newtonian Case ◽  
Viscosity Variation

In this study, the effect of viscosity variation of non-Newtonian lubrication on squeeze film characteristics with porous and Rabinowitsch fluid for conical bearings is analyzed. The modified Reynolds equation representing the characteristics of non-Newtonian fluid with viscosity variation on the porous wall followed by the cubic stress law condition is invoked. For lubricant flow in a bearing clearance and in a porous layer Morgan–Cameron approximation is considered. A small perturbation technique is used to compute the pressure generation using modified Reynolds equation of lubrication. Approximate analytical solutions have been obtained for the squeeze film pressure, load-carrying capacity, squeeze film time, and center of pressure. The outcomes are displayed in diagrams and tables, which show that the effect of viscosity variation and porous wall on the squeeze film lubrication of conical bearings decreases film pressure, load-carrying capacity, and response time for the Newtonian case in comparison to the non-Newtonian case.

scholarly journals Non-Newtonian Effects on the Squeeze Film Characteristics between a Sphere and a Flat Plate: Rabinowitsch Model

2012 ◽  
Vol 2012 ◽  
pp. 1-7 ◽  
Author(s):  
Udaya P. Singh ◽  
Ram S. Gupta
Keyword(s):  
Flat Plate ◽  
Carrying Capacity ◽  
Significant Variation ◽  
Reynolds Equation ◽  
Fluid Model ◽  
Squeeze Film ◽  
Load Carrying Capacity ◽  
Film Pressure ◽  
Load Carrying ◽  
Film Characteristics

The use of additives (polyisobutylene, ethylene-propylene, lithium hydroxy stearate, hydrophobic silica, etc.) changes lubricants’ rheology due to which they show pseudoplastic and dilatant nature, which can be modelled as cubic stress fluid model (Rabinowitsch fluid model). The present theoretical analysis investigates the effects of non-Newtonian pseudoplastic and dilatant lubricants on the squeezing characteristics of a sphere and a flat plate. The modified Reynolds equation has been derived and an asymptotic solution for film pressure is obtained. The results for the film pressure distribution, load carrying capacity, and squeezing time characteristics have been calculated for various values of pseudoplastic parameter and compared with the Newtonian results. These characteristics show a significant variation with the non-Newtonian pseudoplastic and dilatant behavior of the fluids.

Effects of piezo-viscous–coupled stress lubricant on the squeeze film performance of parallel triangular plates

2019 ◽  
Vol 234 (9) ◽  
pp. 1514-1521 ◽  
Author(s):  
H Aminkhani ◽  
M Daliri
Keyword(s):  
Pressure Distribution ◽  
Carrying Capacity ◽  
Couple Stress ◽  
Squeeze Film ◽  
Load Carrying Capacity ◽  
Film Performance ◽  
Pressure Dependency ◽  
Load Carrying ◽  
Viscosity Variation ◽  
Coupled Stress

The paper shows the combined effects of couple stress fluids and lubricant viscosity variation with pressure in squeeze film performance of parallel triangular plates. By solving Reynolds equation and using perturbation method, the pressure distribution is obtained with consideration of viscosity variation with pressure. Also, with integrating pressure in the film region, load-carrying capacity is derived. A fourth-order Rang–Kutta is used to solve the nonlinear differential equation between lubricant film thickness and time. Various cases of couple stress, iso-viscous and piezo-viscous contributions are analyzed. According to the results, it is found that using couple stress fluid as a lubricant and considering viscosity–pressure dependency will increase characteristics of the squeeze film such as load-carrying capacity, pressure distribution, and triangular plates moving time, significantly as compared to the classical Newtonian iso-viscous lubricant.

scholarly journals MULTIGRID METHOD FOR THE SOLUTION OF COMBINED EFFECT OF VISCOSITY VARIATION AND SURFACE ROUGHNESS ON THE SQUEEZE FILM LUBRICATION OF JOURNAL BEARINGS

2017 ◽  
Vol 46 (1) ◽  
pp. 1-8
Author(s):  
Vishwanath B. Awati ◽  
Ashwini Kengangutti ◽  
Mahesh Kumar N.
Keyword(s):  
Surface Roughness ◽  
Carrying Capacity ◽  
Micropolar Fluid ◽  
Reynolds Equation ◽  
Multigrid Method ◽  
Squeeze Film ◽  
Load Carrying Capacity ◽  
Load Carrying ◽  
Viscosity Variation ◽  
Film Lubrication

The paper presents, the multigrid method for the solution of combined effect of surface roughness and viscosity variation on the squeeze film lubrication of a short journal bearing operating with micropolar fluid. The modified Reynolds equation which incorporates the variation of viscosity in micropolar fluid is analysed using Multigrid method. The governing modified Reynolds equation is solved numerically for the fluid film pressure and bearing characteristics viz. load carrying capacity and squeeze time. The analysis of the results predicts that, the viscosity variation factor decreases the load carrying capacity and squeeze film time, resulting into a longer bearing life. The results are compared with the corresponding analytical solutions.

scholarly journals Effect of Surface Roughness and Viscosity-Pressure Dependency on the Couple Stress Squeeze Film Characteristics of Parallel Circular Plates

2014 ◽  
Vol 2014 ◽  
pp. 1-7 ◽  
Author(s):  
Neminath Bhujappa Naduvinamani ◽  
Siddangouda Apparao ◽  
Ayyappa G. Hiremath
Keyword(s):  
Surface Roughness ◽  
Carrying Capacity ◽  
Couple Stress ◽  
Reynolds Equation ◽  
Squeeze Film ◽  
Load Carrying Capacity ◽  
Circular Plates ◽  
Pressure Dependency ◽  
Load Carrying ◽  
Film Characteristics

Combined effects of surface roughness and viscosity-pressure dependency on the couple stress squeeze film characteristics of parallel circular plates are presented. On the basis of Christensen’s stochastic theory, two types of one-dimensional roughness structures, namely, the radial roughness and azimuthal roughness patterns, are considered and the stochastic modified Reynolds equation for these two types of roughness patterns is derived for Stokes couple stress fluid by taking into account variation of viscosity with pressure. The standard perturbation technique is employed to solve the averaged Reynolds equation and closed form expressions for the mean fluid film pressure, load carrying capacity, and squeeze film time are obtained. It is found that the effects of couple stresses and viscosity-pressure dependency are to increase the load carrying capacity, and squeeze film time for both types of roughness patterns. The effect of azimuthal (radial) roughness pattern is to increase (decrease) these squeeze film characteristics as compared to the corresponding smooth case.

Sign in / Sign up

Export Citation Format

Share Document