The Numerical Prediction of Viscous Flow and Heat Transfer in Tube Banks

1978 ◽  
Vol 100 (4) ◽  
pp. 565-571 ◽  
Author(s):  
B. E. Launder ◽  
T. H. Massey
Keyword(s):  
Heat Transfer ◽  
Viscous Flow ◽  
Stokes Equations ◽  
Reynolds Numbers ◽  
Navier Stokes ◽  
Substantial Contribution ◽  
Navier Stokes Equations ◽  
Flow And Heat Transfer ◽  
Flow Domain ◽  
Tube Banks

A scheme for handling the numerical analysis of viscous flow and heat transfer in tube banks is presented. It involves the use of a cylindrical network of nodes in the vicinity of the tubes with a Cartesian mesh covering the remainder of the flow domain. The approach has been incorporated into the numerical solving algorithm for the Navier Stokes equations of Gasman, et al. [8]. A number of demonstration calculations is presented including a numerical simulation of the staggered square bank for which Bergelin and co-workers [4, 9] have reported experimental results for pressure drop and heat transfer rate. Agreement between predicted and measured characteristics is satisfactory when account is taken of end and entry effects that are present in the experiments but necessarily omitted from the calculations. Indeed the close agreement of the laminar predictions with measurements extends to Reynolds numbers in excess of 1000, a level at which it has hitherto been supposed that turbulent motion in the fluid made a substantial contribution to friction and heat transfer.

Fast forced liquid film spreading on a substrate: flow, heat transfer and phase transition

2010 ◽  
Vol 656 ◽  
pp. 189-204 ◽  
Author(s):  
ILIA V. ROISMAN
Keyword(s):  
Heat Transfer ◽  
Phase Transition ◽  
Stokes Equations ◽  
Substrate Surface ◽  
Reynolds Numbers ◽  
Drop Impact ◽  
Navier Stokes ◽  
Navier Stokes Equations ◽  
Theoretical Predictions ◽  
Viscous Drop

This theoretical study is devoted to description of fluid flow and heat transfer in a spreading viscous drop with phase transition. A similarity solution for the combined full Navier–Stokes equations and energy equation for the expanding lamella generated by drop impact is obtained for a general case of oblique drop impact with high Weber and Reynolds numbers. The theory is applicable to the analysis of the phenomena of drop solidification, target melting and film boiling. The theoretical predictions for the contact temperature at the substrate surface agree well with the existing experimental data.

Axisymmetric Stagnation—Point Flow and Heat Transfer of a Viscous Fluid on a Rotating Cylinder With Time-Dependent Angular Velocity and Uniform Transpiration

2006 ◽  
Vol 129 (1) ◽  
pp. 106-115 ◽  
Author(s):  
A. B. Rahimi ◽  
R. Saleh
Keyword(s):  
Heat Transfer ◽  
Heat Flux ◽  
Reynolds Number ◽  
Angular Velocity ◽  
Stokes Equations ◽  
Time Dependent ◽  
Navier Stokes ◽  
Navier Stokes Equations ◽  
Flow And Heat Transfer ◽  
Self Similar

The unsteady viscous flow and heat transfer in the vicinity of an axisymmetric stagnation point of an infinite rotating circular cylinder with transpiration U0 are investigated when the angular velocity and wall temperature or wall heat flux all vary arbitrarily with time. The free stream is steady and with a strain rate of Γ. An exact solution of the Navier-Stokes equations and energy equation is derived in this problem. A reduction of these equations is obtained by the use of appropriate transformations for the most general case when the transpiration rate is also time-dependent but results are presented only for uniform values of this quantity. The general self-similar solution is obtained when the angular velocity of the cylinder and its wall temperature or its wall heat flux vary as specified time-dependent functions. In particular, the cylinder may rotate with constant speed, with exponentially increasing/decreasing angular velocity, with harmonically varying rotation speed, or with accelerating/decelerating oscillatory angular speed. For self-similar flow, the surface temperature or its surface heat flux must have the same types of behavior as the cylinder motion. For completeness, sample semi-similar solutions of the unsteady Navier-Stokes equations have been obtained numerically using a finite-difference scheme. Some of these solutions are presented for special cases when the time-dependent rotation velocity of the cylinder is, for example, a step-function. All the solutions above are presented for Reynolds numbers, Re=Γa2∕2υ, ranging from 0.1 to 1000 for different values of Prandtl number and for selected values of dimensionless transpiration rate, S=U0∕Γa, where a is cylinder radius and υ is kinematic viscosity of the fluid. Dimensionless shear stresses corresponding to all the cases increase with the increase of Reynolds number and suction rate. The maximum value of the shear stress increases with increasing oscillation frequency and amplitude. An interesting result is obtained in which a cylinder rotating with certain exponential angular velocity function and at particular value of Reynolds number is azimuthally stress-free. Heat transfer is independent of cylinder rotation and its coefficient increases with the increasing suction rate, Reynolds number, and Prandtl number. Interesting means of cooling and heating processes of cylinder surface are obtained using different rates of transpiration.

Developing Fluid Flow and Heat Transfer in a Semi-Porous Square Channel

2003 ◽  
Author(s):  
Tien-Chien Jen ◽  
Tuan-Zhou Yan ◽  
S. H. Chan
Keyword(s):  
Heat Transfer ◽  
Porous Media ◽  
Fluid Flow ◽  
Stokes Equations ◽  
Temperature Fields ◽  
Porous Channel ◽  
Navier Stokes ◽  
Axial Position ◽  
Navier Stokes Equations ◽  
Flow And Heat Transfer

A three-dimensional computational model is developed to analyze fluid flow in a semi-porous channel. In order to understand the developing fluid flow and heat transfer process inside the semi-porous channels, the conventional Navier-Stokes equations for gas channel, and volume-averaged Navier-Stokes equations for porous media layer are adopted individually in this study. Conservation of mass, momentum and energy equations are solved numerically in a coupled gas and porous media domain in a channel using the vorticity-velocity method with power law scheme. Detailed development of axial velocity, secondary flow and temperature fields at various axial positions in the entrance region are presented. The friction factor and Nusselt number are presented as a function of axial position, and the effects of the size of porous media inside semi-porous channel are also analyzed in the present study.

A Numerical Simulation of Heat Pipe Application to the Cooling of Pulse Detonation Engines

2003 ◽  
Author(s):  
V. Dakshina Murty
Keyword(s):  
Heat Transfer ◽  
Heat Pipe ◽  
Stokes Equations ◽  
Navier Stokes ◽  
Brinkman Model ◽  
Navier Stokes Equations ◽  
Pulse Detonation Engines ◽  
Pulse Detonation ◽  
Flow And Heat Transfer ◽  
Detonation Tube

A numerical method based on the finite elements is applied to the cooling of pulse detonation tube using heat pipe technology. Towards this end, the fluid flow and heat transfer in the wick are modeled as flow in a porous medium. The flow is described using the so called Darcy Brinkman model which has close resemblance to the Navier-Stokes equations. It is found that for Darcy numbers less than 0.0001 the results are indistinguishable from regular Darcy flows. The shape of the heat pipe is that of a fin with the proportion of the length of the evaporator section being varied. In this study two values of this ratio have been used, namely 1 and 0.5.

A Numerical Study of the Influence of Disc Geometry on the Flow and Heat Transfer in a Rotating Cavity

1990 ◽  
Author(s):  
B. L. Lapworth ◽  
J. W. Chew
Keyword(s):  
Heat Transfer ◽  
Numerical Solutions ◽  
Stokes Equations ◽  
Numerical Study ◽  
Navier Stokes ◽  
Navier Stokes Equations ◽  
Model Calculations ◽  
Flow And Heat Transfer ◽  
Rotating Cavity ◽  
Radial Outflow

Numerical solutions of the Reynolds-averaged Navier-Stokes equations have been used to model the influence of cobs and a bolt cover on the flow and heat transfer in a rotating cavity with an imposed radial outflow of air. Axisymmetric turbulent flow is assumed using a mixing length turbulence model. Calculations for the non-plane discs are compared with plane disc calculations and also with the available experimental data. The calculated flow structures show good agreement with the experimentally observed trends. For the cobbed and plane discs, Nusselt numbers are calculated for a combination of flow rates and rotational speeds; these show some discrepancies with the experiments, although the calculations exhibit the more consistent trend. Further calculations indicate that differences in thermal boundary conditions have a greater influence on Nusselt number than differences in disc geometry. The influence of the bolt cover on the heat transfer has also been modelled, although comparative measurements are not available.

Numerical Computation of Fluid Flow and Heat Transfer in Microchannels

2005 ◽  
Author(s):  
Ningli Liu ◽  
Rene Chevray ◽  
Gerald A. Domoto ◽  
Elias Panides
Keyword(s):  
Heat Transfer ◽  
Fluid Flow ◽  
Energy Equation ◽  
Stokes Equations ◽  
Numerical Approach ◽  
Time Dependent ◽  
Navier Stokes ◽  
Temperature Profiles ◽  
Navier Stokes Equations ◽  
Flow And Heat Transfer

A finite difference numerical approach for solving slightly compressible, time-dependent, viscous laminar flow is presented in this study. Simplified system of Navier-Stokes equations and energy equation are employed in the study in order to perform more efficient numerical calculations. Fluid flow and heat transfer phenomena in two dimensional microchannels are illustrated numerically in this paper. This numerical approach provides a complete numerical simulation of the development of the fluid flow and the temperature profiles through multi-dimensional microchannels.

Heat Transfer of Coupled Fluid Flow Within a Channel With a Permeable Base

2009 ◽  
Vol 131 (11) ◽  
Author(s):  
Rosemarie Mohais ◽  
Balswaroop Bhatt
Keyword(s):  
Heat Transfer ◽  
Numerical Solutions ◽  
Stokes Equations ◽  
Effective Means ◽  
Reynolds Numbers ◽  
Model Systems ◽  
Surface Velocity ◽  
Navier Stokes ◽  
Navier Stokes Equations ◽  
Small Reynolds Numbers

We examine the heat transfer in a Newtonian fluid confined within a channel with a lower permeable wall. The upper wall of the channel is impermeable and driven by an accelerating surface velocity. Through a similarity solution, the Navier–Stokes equations are reduced to a fourth-order differential equation; the analytical solutions of which determined for small Reynolds numbers show dependence of the temperature and heat transfer profiles on the slip parameter based on the properties of the porous channel base. For larger Reynolds numbers, numerical solutions for three main groups of solutions show that the Reynolds number strongly influences the heat transfer profile. However, the slip conditions associated with the porous base of the channel can be used to alter these heat transfer profiles for large Reynolds numbers. The presence of a porous base in a channel can thus serve as an effective means of reducing or enhancing heat transfer performance in model systems.

scholarly journals Experimental and Numerical Study to Enhance of Heat Transfer Coefficient in Air Flow Using Microchannel

2018 ◽  
Vol 26 (7) ◽  
pp. 112-123
Author(s):  
Jalal M. Jalil ◽  
Ghada A. Aziz ◽  
Amjed A. Kadhim
Keyword(s):  
Heat Transfer ◽  
Heat Transfer Coefficient ◽  
Transfer Coefficient ◽  
Stokes Equations ◽  
Numerical Study ◽  
Simple Algorithm ◽  
Navier Stokes ◽  
Navier Stokes Equations ◽  
Flow And Heat Transfer ◽  
The Heat Transfer Coefficient

Experimental and numerical study of fluid flow and heat transfer in microchannel airflow is investigated. The study covers changing the cooling of micro-channel for the velocities and heater powers. The dimensions of the microchannel were, length = 0.1m, width = 0.001m, height = 0.0005 m. The experimental and numerical results were compared with the previous paper for velocities up to 20 m/s and heater powers up to 5 W and the comparison was acceptable. In this paper, the results were extended numerically for velocities up to 60 m/s. The numerical solution used finite volume (SIMPLE algorithm) to solve Navier Stokes equations (continuity, momentum and energy). The results show that the heat transfer coefficient increases up to 220 W/m2 oC for velocity 60 m/s.

Laminar Heat Transfer in a Channel With Two Right-Angled Bends

1984 ◽  
Vol 106 (3) ◽  
pp. 591-596 ◽  
Author(s):  
R. S. Amano
Keyword(s):  
Heat Transfer ◽  
Reynolds Number ◽  
Stokes Equations ◽  
Numerical Study ◽  
Local Heat Transfer ◽  
Local Heat ◽  
Navier Stokes ◽  
Navier Stokes Equations ◽  
Flow And Heat Transfer ◽  
Long Channel

A numerical study is reported on the flow and heat transfer in the channel with two right-angled bends. The modified hybrid scheme was employed to solve the steady full Navier-Stokes equations with the energy equation. The computations were performed for different step heights created in a long channel. The local heat transfer rate along the channel wall predicted by employing the present numerical model showed good agreement with the experimental data. The behavior of the flow and the heat transfer were investigated for the range of Reynolds number between 200 and 2000 and for step height ratios H/W = 1, 2, and 3. Finally, the correlation of the average Nusselt number in such channels as a function of Reynolds number is postulated.

Sign in / Sign up

Export Citation Format

Share Document