scholarly journals Discussion: “Hyperbolic Heat-Conduction Equation—A Solution for the Semi-Infinite Body Problem” (Baumeister, K. J., and Hamill, T. D., 1969, ASME J. Heat Transfer, 91, pp. 543–548)

1971 ◽  
Vol 93 (1) ◽  
pp. 126-127 ◽  
Author(s):  
K. J. Baumeister ◽  
T. D. Hamill
Author(s):  
E Izadpanah ◽  
S Talebi ◽  
M H Hekmat

The non-Fourier effects on transient and steady temperature distribution in combined heat transfer are studied. The processes of coupled conduction and radiation heat transfer in grey, absorbing, emitting, scattering, one-dimensional medium with black boundary surfaces are analysed numerically. The hyperbolic heat conduction equation is solved by flux splitting method, and the radiative transfer equation is solved by P1 approximate method. The transient thermal responses obtained from non-Fourier heat conduction equation are compared with those obtained from the Fourier heat conduction equation. The results show that the non-Fourier effect can be important when the conduction to radiation parameter and the thermal relaxation time are larger. Further, the radiation effect is more pronounced at small values of single scattering albedo and conduction to radiation parameters. Analysis results indicate that the internal radiation in the medium significantly influences the wave nature.


Author(s):  
Siddharth Saurav ◽  
Sandip Mazumder

Abstract The Fourier heat conduction and the hyperbolic heat conduction equations were solved numerically to simulate a frequency-domain thermoreflectance (FDTR) experimental setup. Numerical solutions enable use of realistic boundary conditions, such as convective cooling from the various surfaces of the substrate and transducer. The equations were solved in time domain and the phase lag between the temperature at the center of the transducer and the modulated pump laser signal were computed for a modulation frequency range of 200 kHz to 200 MHz. It was found that the numerical predictions fit the experimentally measured phase lag better than analytical frequency-domain solutions of the Fourier heat equation based on Hankel transforms. The effects of boundary conditions were investigated and it was found that if the substrate (computational domain) is sufficiently large, the far-field boundary conditions have no effect on the computed phase lag. The interface conductance between the transducer and the substrate was also treated as a parameter, and was found to have some effect on the predicted thermal conductivity, but only in certain regimes. The hyperbolic heat conduction equation yielded identical results as the Fourier heat conduction equation for the particular case studied. The thermal conductivity value (best fit) for the silicon substrate considered in this study was found to be 108 W/m/K, which is slightly different from previously reported values for the same experimental data.


2016 ◽  
Vol 33 (1) ◽  
pp. 65-75 ◽  
Author(s):  
M. R. Talaee ◽  
V. Sarafrazi

AbstractThis paper is devoted to the analytical solution of three-dimensional hyperbolic heat conduction equation in a finite solid medium with rectangular cross-section under time dependent and non-uniform internal heat source. The closed form solution of both Fourier and non-Fourier profiles are introduced with Eigen function expansion method. The solution is applied for simple simulation of absorption of a continues laser in biological tissue. The results show the depth of laser absorption in tissue and considerable difference between the Fourier and Non-Fourier temperature profiles. In addition the solution can be applied as a verification branch for other numerical solutions.


1990 ◽  
Vol 112 (3) ◽  
pp. 555-560 ◽  
Author(s):  
W. Kaminski

The physical meaning of the constant τ in Cattaneo and Vernotte’s equation for materials with a nonhomogeneous inner structure has been considered. An experimental determination of the constant τ has been proposed and some values for selected products have been given. The range of differences in the description of heat transfer by parabolic and hyperbolic heat conduction equations has been discussed. Penetration time, heat flux, and temperature profiles have been taken into account using data from the literature and our experimental and calculated results.


Sign in / Sign up

Export Citation Format

Share Document