The hyperbolic heat conduction equation in an anisotropic material

1999 ◽  
Vol 35 (6) ◽  
pp. 493-497 ◽  
Author(s):  
M. Al-Nimr ◽  
M. Naji
Keyword(s):  
Heat Conduction ◽  
Anisotropic Material ◽  
Heat Conduction Equation ◽  
Conduction Equation ◽  
Hyperbolic Heat Conduction

Assessment of Models for Extracting Thermal Conductivity From Frequency Domain Thermoreflectance Experiments

2020 ◽  
Author(s):  
Siddharth Saurav ◽  
Sandip Mazumder
Keyword(s):  
Thermal Conductivity ◽  
Heat Conduction ◽  
Boundary Conditions ◽  
Frequency Domain ◽  
Heat Conduction Equation ◽  
Conduction Equation ◽  
Hyperbolic Heat Conduction ◽  
Phase Lag ◽  
Computational Domain ◽  
Fourier Heat Conduction

Abstract The Fourier heat conduction and the hyperbolic heat conduction equations were solved numerically to simulate a frequency-domain thermoreflectance (FDTR) experimental setup. Numerical solutions enable use of realistic boundary conditions, such as convective cooling from the various surfaces of the substrate and transducer. The equations were solved in time domain and the phase lag between the temperature at the center of the transducer and the modulated pump laser signal were computed for a modulation frequency range of 200 kHz to 200 MHz. It was found that the numerical predictions fit the experimentally measured phase lag better than analytical frequency-domain solutions of the Fourier heat equation based on Hankel transforms. The effects of boundary conditions were investigated and it was found that if the substrate (computational domain) is sufficiently large, the far-field boundary conditions have no effect on the computed phase lag. The interface conductance between the transducer and the substrate was also treated as a parameter, and was found to have some effect on the predicted thermal conductivity, but only in certain regimes. The hyperbolic heat conduction equation yielded identical results as the Fourier heat conduction equation for the particular case studied. The thermal conductivity value (best fit) for the silicon substrate considered in this study was found to be 108 W/m/K, which is slightly different from previously reported values for the same experimental data.

Analytical Solution for Three-Dimensional Hyperbolic Heat Conduction Equation with Time-Dependent and Distributed Heat Source

2016 ◽  
Vol 33 (1) ◽  
pp. 65-75 ◽  
Author(s):  
M. R. Talaee ◽  
V. Sarafrazi
Keyword(s):  
Heat Conduction ◽  
Analytical Solution ◽  
Heat Source ◽  
Heat Conduction Equation ◽  
Numerical Solutions ◽  
Three Dimensional ◽  
Closed Form Solution ◽  
Time Dependent ◽  
Conduction Equation ◽  
Hyperbolic Heat Conduction

AbstractThis paper is devoted to the analytical solution of three-dimensional hyperbolic heat conduction equation in a finite solid medium with rectangular cross-section under time dependent and non-uniform internal heat source. The closed form solution of both Fourier and non-Fourier profiles are introduced with Eigen function expansion method. The solution is applied for simple simulation of absorption of a continues laser in biological tissue. The results show the depth of laser absorption in tissue and considerable difference between the Fourier and Non-Fourier temperature profiles. In addition the solution can be applied as a verification branch for other numerical solutions.

Sign in / Sign up

Export Citation Format

Share Document