scholarly journals Discussion: “A Method of Measuring the Three-Dimensional Mean Flow and Turbulence Quantities Inside a Rotating Turbo-machinery Passage” (Gorton, C. A., and Lakshminarayana, B., 1976, ASME J. Eng. Power, 98, pp. 137–144)

1976 ◽  
Vol 98 (2) ◽  
pp. 144-145 ◽  
Author(s):  
K. Bammert ◽  
A. Mobarak
Keyword(s):  
Three Dimensional ◽  
Mean Flow ◽  
Turbo Machinery

A Method of Measuring the Three-Dimensional Mean Flow and Turbulence Quantities Inside a Rotating Turbo-machinery Passage

1976 ◽  
Vol 98 (2) ◽  
pp. 137-144 ◽  
Author(s):  
C. A. Gorton ◽  
B. Lakshminarayana
Keyword(s):  
Turbulence Intensity ◽  
Three Dimensional ◽  
Hot Wire ◽  
Mean Flow ◽  
Mean Velocity ◽  
Hot Wire Anemometry ◽  
Turbo Machinery ◽  
Velocity Turbulence

A method of measuring the three-dimensional components of mean velocity and turbulence quantities within a rotating turbomachinery passage is developed through the use of hot wire anemometry techniques. Equations are derived which, when solved simultaneously and in conjunction with the data obtained from the hot wire anemometer measurements, will provide values for the radial, axial and tangential components of mean velocity, turbulence intensity and turbulence stress within the rotating turbomachinery passage. A three-bladed rocket pump inducer model, operating in air, was used in the experimentation. The method is very accurate and provides very useful information on the characteristics of the flow inside rotor passages hitherto unexplored.

Tilting at wave beams: a new perspective on the St. Andrew’s Cross

2017 ◽  
Vol 830 ◽  
pp. 660-680 ◽  
Author(s):  
T. Kataoka ◽  
S. J. Ghaemsaidi ◽  
N. Holzenberger ◽  
T. Peacock ◽  
T. R. Akylas
Keyword(s):  
Wave Field ◽  
Finite Length ◽  
Line Source ◽  
Cutoff Frequency ◽  
Three Dimensional ◽  
Resonance Phenomenon ◽  
Buoyancy Frequency ◽  
Reynolds Stresses ◽  
Mean Flow ◽  
Viscous Effects

The generation of internal gravity waves by a vertically oscillating cylinder that is tilted to the horizontal in a stratified Boussinesq fluid of constant buoyancy frequency, $N$, is investigated. This variant of the widely studied horizontal configuration – where a cylinder aligned with a plane of constant gravitational potential induces four wave beams that emanate from the cylinder, forming a cross pattern known as the ‘St. Andrew’s Cross’ – brings out certain unique features of radiated internal waves from a line source tilted to the horizontal. Specifically, simple kinematic considerations reveal that for a cylinder inclined by a given angle $\unicode[STIX]{x1D719}$ to the horizontal, there is a cutoff frequency, $N\sin \unicode[STIX]{x1D719}$, below which there is no longer a radiated wave field. Furthermore, three-dimensional effects due to the finite length of the cylinder, which are minor in the horizontal configuration, become a significant factor and eventually dominate the wave field as the cutoff frequency is approached; these results are confirmed by supporting laboratory experiments. The kinematic analysis, moreover, suggests a resonance phenomenon near the cutoff frequency as the group-velocity component perpendicular to the cylinder direction vanishes at cutoff; as a result, energy cannot be easily radiated away from the source, and nonlinear and viscous effects are likely to come into play. This scenario is examined by adapting the model for three-dimensional wave beams developed in Kataoka & Akylas (J. Fluid Mech., vol. 769, 2015, pp. 621–634) to the near-resonant wave field due to a tilted line source of large but finite length. According to this model, the combination of three-dimensional, nonlinear and viscous effects near cutoff triggers transfer of energy, through the action of Reynolds stresses, to a circulating horizontal mean flow. Experimental evidence of such an induced mean flow near cutoff is also presented.

Turbulent flow between counter-rotating concentric cylinders: a direct numerical simulation study

2008 ◽  
Vol 615 ◽  
pp. 371-399 ◽  
Author(s):  
S. DONG
Keyword(s):  
Turbulent Flow ◽  
Large Scale ◽  
Outer Cylinder ◽  
Three Dimensional ◽  
Reynolds Numbers ◽  
Taylor Vortex ◽  
Small Scale ◽  
Mean Flow ◽  
Concentric Cylinders ◽  
High Reynolds

We report three-dimensional direct numerical simulations of the turbulent flow between counter-rotating concentric cylinders with a radius ratio 0.5. The inner- and outer-cylinder Reynolds numbers have the same magnitude, which ranges from 500 to 4000 in the simulations. We show that with the increase of Reynolds number, the prevailing structures in the flow are azimuthal vortices with scales much smaller than the cylinder gap. At high Reynolds numbers, while the instantaneous small-scale vortices permeate the entire domain, the large-scale Taylor vortex motions manifested by the time-averaged field do not penetrate a layer of fluid near the outer cylinder. Comparisons between the standard Taylor–Couette system (rotating inner cylinder, fixed outer cylinder) and the counter-rotating system demonstrate the profound effects of the Coriolis force on the mean flow and other statistical quantities. The dynamical and statistical features of the flow have been investigated in detail.

Unravelling the large-scale circulation modes in turbulent Rayleigh–Bénard convection

2021 ◽  
Author(s):  
Susanne Horn ◽  
Peter J. Schmid ◽  
Jonathan M. Aurnou
Keyword(s):  
Large Scale ◽  
Three Dimensional ◽  
Dynamic Mode Decomposition ◽  
Dynamic Mode ◽  
Mean Flow ◽  
Large Scale Circulation ◽  
Convective Systems ◽  
Aspect Ratios ◽  
Mode Decomposition ◽  
Coherent Flow Structure

Abstract The large-scale circulation (LSC) is the most fundamental turbulent coherent flow structure in Rayleigh-B\'enard convection. Further, LSCs provide the foundation upon which superstructures, the largest observable features in convective systems, are formed. In confined cylindrical geometries with diameter-to-height aspect ratios of Γ ≅ 1, LSC dynamics are known to be governed by a quasi-two-dimensional, coupled horizontal sloshing and torsional (ST) oscillatory mode. In contrast, in Γ ≥ √2 cylinders, a three-dimensional jump rope vortex (JRV) motion dominates the LSC dynamics. Here, we use dynamic mode decomposition (DMD) on direct numerical simulation data of liquid metal to show that both types of modes co-exist in Γ = 1 and Γ = 2 cylinders but with opposite dynamical importance. Furthermore, with this analysis, we demonstrate that ST oscillations originate from a tilted elliptical mean flow superposed with a symmetric higher order mode, which is connected to the four rolls in the plane perpendicular to the LSC in Γ = 1 tanks.

Experimental and Theoretical Investigation of the Supersonic Boundary Layer Stability on the Swept Wing

2008 ◽  
Vol 3 (3) ◽  
pp. 34-38
Author(s):  
Sergey A. Gaponov ◽  
Yuri G. Yermolaev ◽  
Aleksandr D. Kosinov ◽  
Nikolay V. Semionov ◽  
Boris V. Smorodsky
Keyword(s):  
Boundary Layer ◽  
Three Dimensional ◽  
Leading Edge ◽  
Supersonic Boundary Layer ◽  
Mean Flow ◽  
Swept Wing ◽  
Wing Model ◽  
Dimensional Boundary ◽  
The Stability ◽  
Good Agreement

Theoretical and an experimental research results of the disturbances development in a swept wing boundary layer are presented at Mach number М = 2. In experiments development of natural and small amplitude controllable disturbances downstream was studied. Experiments were carried out on a swept wing model with a lenticular profile at a zero attack angle. The swept angle of a leading edge was 40°. Wave parameters of moving disturbances were determined. In frames of the linear theory and an approach of the local self-similar mean flow the stability of a compressible three-dimensional boundary layer is studied. Good agreement of the theory with experimental results for transversal scales of unstable vertices of the secondary flow was obtained. However the calculated amplification rates differ from measured values considerably. This disagreement is explained by the nonlinear processes observed in experiment

The influence of mean shear on Alfvén-internal wave propagation

1976 ◽  
Vol 15 (2) ◽  
pp. 197-222
Author(s):  
R. J. Hartman
Keyword(s):  
Three Dimensional ◽  
Dimensional System ◽  
Linear Wave ◽  
Mean Flow ◽  
Wave Processes ◽  
Initial Value ◽  
Initial Wave ◽  
Wave Phenomena ◽  
Three Dimensional System

This paper uses the general solution of the linearized initial-value problem for an unbounded, exponentially-stratified, perfectly-conducting Couette flow in the presence of a uniform magnetic field to study the development of localized wave-type perturbations to the basic flow. The two-dimensional problem is shown to be stable for all hydrodynamic Richardson numbers JH, positive and negative, and wave packets in this flow are shown to approach, asymptotically, a level in the fluid (the ‘isolation level’) which is a smooth, continuous, function of JH that is well defined for JH < 0 as well as JH > 0. This system exhibits a rich complement of wave phenomena and a variety of mechanisms for the transport of mean flow kinetic and potential energy, via linear wave processes, between widely-separated regions of fluid; this in addition to the usual mechanisms for the absorption of the initial wave energy itself. The appropriate three-dimensional system is discussed, and the role of nonlinearities on the development of localized disturbances is considered.

scholarly journals Experimental analysis of the shear flow effect on tidal turbine blade root force from three-dimensional mean flow reconstruction

2020 ◽  
Vol 378 (2178) ◽  
pp. 20200001 ◽  
Author(s):  
B. Gaurier ◽  
Ph. Druault ◽  
M. Ikhennicheu ◽  
G. Germain
Keyword(s):  
Turbine Blade ◽  
Dimensional Space ◽  
Three Dimensional ◽  
Tidal Energy ◽  
Velocity Shear ◽  
Reconstruction Method ◽  
Mean Flow ◽  
Blade Root ◽  
Image Velocimetry ◽  
Tidal Turbine

In the main tidal energy sites like Alderney Race, turbulence intensity is high and velocity fluctuations may have a significant impact on marine turbines. To understand such phenomena better, a three-bladed turbine model is positioned in the wake of a generic wall-mounted obstacle, representative of in situ bathymetric variation. From two-dimensional Particle Image Velocimetry planes, the time-averaged velocity in the wake of the obstacle is reconstructed in the three-dimensional space. The reconstruction method is based on Proper Orthogonal Decomposition and enables access to a representation of the mean flow field and the associated shear. Then, the effect of the velocity gradient is observed on the turbine blade root force, for four turbine locations in the wake of the obstacle. The blade root force average decreases whereas its standard deviation increases when the distance to the obstacle increases. The angular distribution of this phase-averaged force is shown to be non-homogeneous, with variation of about 20% of its time-average during a turbine rotation cycle. Such force variations due to velocity shear will have significant consequences in terms of blade fatigue. This article is part of the theme issue ‘New insights on tidal dynamics and tidal energy harvesting in the Alderney Race’.

scholarly journals Modeling the 3-d flow around a cylinder using the SAS hybrid model

2014 ◽  
Vol 16 (5) ◽  
pp. 901-918 ◽  
Keyword(s):  
Turbulence Modeling ◽  
Stokes Equations ◽  
Three Dimensional ◽  
Cross Flow ◽  
Numerical Code ◽  
Navier Stokes ◽  
Computational Domain ◽  
Mean Flow ◽  
Unstable Flow ◽  
Vortex Size

<div> <p>Three-dimensional calculations were performed to simulate the flow around a cylindrical vegetation element using the Scale Adaptive Simulation (SAS) model; commonly, this is the first step of the modeling of the flow through multiple vegetation elements. SAS solves the Reynolds Averaged Navier-Stokes equations in stable flow regions, while in regions with unstable flow it goes unsteady producing a resolved turbulent spectrum after reducing eddy viscosity according to the locally resolved vortex size represented by the von Karman length scale. A finite volume numerical code was used for the spatial discretisation of the rectangular computational domain with stream-wise, cross-flow and vertical dimensions equal to 30D, 11D and 1D, respectively, which was resolved with unstructured grids. Calculations were compared with experiments and Large Eddy Simulations (LES). Predicted overall flow parameters and mean flow velocities exhibited a very satisfactory agreement with experiments and LES, while the agreement of predicted turbulent stresses was satisfactory. Calculations showed that SAS is an efficient and relatively fast turbulence modeling approach, especially in relevant practical problems, in which the very high accuracy that can be achieved by LES at the expense of large computational times is not required.</p> </div> <p>&nbsp;</p>

Forcing of oceanic mean flows by dissipating internal tides

2012 ◽  
Vol 708 ◽  
pp. 250-278 ◽  
Author(s):  
Nicolas Grisouard ◽  
Oliver Bühler
Keyword(s):  
Numerical Study ◽  
Three Dimensional ◽  
Wave Drag ◽  
Perturbation Series ◽  
Internal Tides ◽  
Time Averaging ◽  
Mean Flow ◽  
Wave Source ◽  
Lee Waves ◽  
Lee Wave

AbstractWe present a theoretical and numerical study of the effective mean force exerted on an oceanic mean flow due to the presence of small-amplitude internal waves that are forced by the oscillatory flow of a barotropic tide over undulating topography and are also subject to dissipation. This extends the classic lee-wave drag problem of atmospheric wave–mean interaction theory to a more complicated oceanographic setting, because now the steady lee waves are replaced by oscillatory internal tides and, most importantly, because now the three-dimensional oceanic mean flow is defined by time averaging over the fast tidal cycles rather than by the zonal averaging familiar from atmospheric theory. Although the details of our computation are quite different, we recover the main action-at-a-distance result from the atmospheric setting, namely that the effective mean force that is felt by the mean flow is located in regions of wave dissipation, and not necessarily near the topographic wave source. Specifically, we derive an explicit expression for the effective mean force at leading order using a perturbation series in small wave amplitude within the framework of generalized Lagrangian-mean theory, discuss in detail the range of situations in which a strong, secularly growing mean-flow response can be expected, and then compute the effective mean force numerically in a number of idealized examples with simple topographies.

Sign in / Sign up

Export Citation Format

Share Document