On the Unsteady Supersonic Cascade With a Subsonic Leading Edge—An Exact First Order Theory—Part 1

1974 ◽  
Vol 96 (1) ◽  
pp. 13-22 ◽  
Author(s):  
M. Kurosaka

This paper presents, in two parts, the theoretical predictions of the aerodynamic forces acting on slowly oscillating airfoils in a supersonic cascade with a subsonic leading edge. The analysis is based on the assumption of an inviscid, two-dimensional and linearized flow. In the first part of the paper, the flow field ahead of the cascade is considered. An initial value problem is posed and, from the periodicity requirement in the cascade, the problem is reformulated in terms of integral equations. Solution of the integral equations, accurate to the first order of a frequency parameter, are obtained in closed form. In the limit of the steady flow, the unsteady flow analysis yields a mathematical verification of the unique incidence effect. Based on this proof, a simple rule is presented for the airfoil suction surface contour satisfying steady flow requirement ahead of the cascade. The complete aeroelastic problem, including the solution for the flow field between the blades and the trailing interference zone, is treated in Part 2.

1974 ◽  
Vol 96 (1) ◽  
pp. 23-31 ◽  
Author(s):  
M. Kurosaka

Pursuant to Part 1, the analysis of the aerodynamic forces acting on slowly oscillating airfoils in a supersonic cascade with a subsonic leading edge is presented. First the flow field between adjacent airfoils is determined. In the limit of sonic leading edge, the present results for the velocity potential agree with the sonic limit of Lane’s supersonic leading edge analysis. The requirement of the continuity of pressure in the “train” leads to functional equations for the train velocity; their solutions, obtained in closed form, are found to involve arbitrary constants which are related to the back pressure. The effect of the back pressure on the “train” is discussed in detail. For a cascade with zero pressure rise across it, the train velocity is determined completely and the formulas for lift and moment, accurate to the first order of a frequency parameter, are obtained in closed form. Stability criteria for a single-degree-of-freedom motion are examined. A pure bending motion is found to be stable, but a pure torsional motion becomes unstable under certain circumstances. These results are consistent with analogous oscillations of an isolated airfoil. However, the stability boundary for a typical cascade differs significantly from the case of the isolated airfoil, being strongly influenced by such cascade parameters as solidity, blade-to-blade phase difference, and stagger angle.


1996 ◽  
Vol 307 ◽  
pp. 135-165 ◽  
Author(s):  
M. A. Jog ◽  
P. S. Ayyaswamy ◽  
I. M. Cohen

The evaporation and combustion of a single-component fuel droplet which is moving slowly in a hot oxidant atmosphere have been analysed using perturbation methods. Results for the flow field, temperature and species distributions in each phase, inter-facial heat and mass transfer, and the enhancement of the mass burning rate due to the presence of convection have all been developed correct to second order in the translational Reynolds number. This represents an advance over a previous study which analysed the problem to first order in the perturbation parameter. The primary motivation for the development of detailed analytical/numerical solutions correct to second order arises from the need for such a higher-order theory in order to investigate fuel droplet ignition and extinction characteristics in the presence of convective flow. Explanations for such a need, based on order of magnitude arguments, are included in this article. With a moving droplet, the shear at the interface causes circulatory motion inside the droplet. Owing to the large evaporation velocities at the droplet surface that usually accompany drop vaporization and burning, the entire flow field is not in the Stokes regime even for low translational Reynolds numbers. In view of this, the formulation for the continuous phase is developed by imposing slow translatory motion of the droplet as a perturbation to uniform radial flow associated with vigorous evaporation at the surface. Combustion is modelled by the inclusion of a fast chemical reaction in a thin reaction zone represented by the Burke–Schumann flame front. The complete solution for the problem correct to second order is obtained by simultaneously solving a coupled formulation for the dispersed and continuous phases. A noteworthy feature of the higher-order formulation is that both the flow field and transport equations require analysis by coupled singular perturbation procedures. The higher-order theory shows that, for identical conditions, compared with the first-order theory both the flame and the front stagnation point are closer to the surface of the drop, the evaporation is more vigorous, the droplet lifetime is shorter, and the internal vortical motion is asymmetric about the drop equatorial plane. These features are significant for ignition/extinction analyses since the prediction of the location of the point of ignition/extinction will depend upon such details. This article is the first of a two-part study; in the second part, analytical expressions and results obtained here will be incorporated into a detailed investigation of fuel droplet ignition and extinction. In view of the general nature of the formulation considered here, results presented have wider applicability in the general areas of interfacial fluid mechanics and heat/material transport. They are particularly useful in microgravity studies, in atmospheric sciences, in aerosol sciences, and in the prediction of material depletion from spherical particles.


1971 ◽  
Vol 93 (4) ◽  
pp. 397-403 ◽  
Author(s):  
M. R. Fink

Compressor noise at transonic tip speeds contains strong tones at multiples of shaft rotation frequency as well as harmonics of blade passage frequency. These multiple pure tones or combination tones are caused by rotor blade nonuniformities which result in pronounced irregularities in the shock pattern attached to the rotor. Nonlinear first-order theory, similar to that used in analysis of sonic boom strength, is utilized to determine shock wave decay with upstream distance. In the extreme near field of the rotor, shock strength varies inversely as the square root of upstream distance from the blade leading edge, as with an isolated airfoil. Somewhat further upstream, the expansion region from the neighboring blade in the cascade interacts with the shock so that shock strength varies as the inverse first power of distance. These aerodynamic results are used to infer some characteristics of transonic compressor noise which in turn are compared with experimental results.


Computability ◽  
2019 ◽  
Vol 8 (3-4) ◽  
pp. 347-358
Author(s):  
Matthew Harrison-Trainor

2015 ◽  
Vol 57 (2) ◽  
pp. 157-185 ◽  
Author(s):  
Peter Franek ◽  
Stefan Ratschan ◽  
Piotr Zgliczynski

Sign in / Sign up

Export Citation Format

Share Document