scholarly journals Application of Advanced Computational Codes in the Design of an Experiment for a Supersonic Throughflow Fan Rotor

1988 ◽  
Vol 110 (2) ◽  
pp. 270-279
Author(s):  
J. R. Wood ◽  
J. F. Schmidt ◽  
R. J. Steinke ◽  
R. V. Chima ◽  
W. G. Kunik
Keyword(s):  
Boundary Layer ◽  
Mach Number ◽  
Pressure Ratio ◽  
Three Dimensional ◽  
Axial Flow ◽  
Navier Stokes ◽  
Nasa Lewis Research ◽  
Two Dimensional ◽  
Final Design ◽  
Dimensional Boundary

Increased emphasis on sustained supersonic or hypersonic cruise has revived interest in the supersonic throughflow fan as a possible component in advanced propulsion systems. Use of a fan that can operate with a supersonic inlet axial Mach number is attractive from the standpoint of reducing the inlet losses incurred in diffusing the flow from a supersonic flight Mach number to a subsonic one at the fan face. The data base for components of this type is practically nonexistent; therefore, in order to furnish the required information for assessment of this type fan, a program has been initiated at the NASA Lewis Research Center to design, build, and test a fan rotor that operates with supersonic axial velocities from inlet to exit. This paper describes the design of the experiment using advanced computational codes to calculate the unique components required. The fan rotor has constant hub and tip radii and was designed for a pressure ratio of 2.7 with a tip speed of 457 m/s. The rotor was designed using existing turbomachinery design and analysis codes modified to handle fully supersonic axial flow through the rotor. A two-dimensional axisymmetric throughflow design code plus a blade element code were used to generate fan rotor velocity diagrams and blade shapes. A quasi-three-dimensional, thin shear layer Navier–Stokes code was used to assess the performance of the fan rotor blade shapes. The final design was stacked and checked for three-dimensional effects using a three-dimensional Euler code interactively coupled with a two-dimensional boundary layer code. A translating nozzle was designed to produce a uniform flow parallel to the fan up to the design axial Mach number of 2.0. The nozzle was designed with the three-dimensional Euler/interactive boundary layer code. The nozzle design in the expansion region was analyzed with a three-dimensional parabolized viscous code, which corroborated the results from the Euler code. A translating supersonic diffuser was designed using these same codes.

Direct simulation of evolution and control of three-dimensional instabilities in attachment-line boundary layers

1995 ◽  
Vol 291 ◽  
pp. 369-392 ◽  
Author(s):  
Ronald D. Joslin
Keyword(s):  
Boundary Layer ◽  
Stokes Equations ◽  
Three Dimensional ◽  
Plate Boundary ◽  
Navier Stokes ◽  
Two Dimensional ◽  
Computationally Efficient ◽  
Simulation Results ◽  
Dimensional Simulation ◽  
Attachment Line

The spatial evolution of three-dimensional disturbances in an attachment-line boundary layer is computed by direct numerical simulation of the unsteady, incompressible Navier–Stokes equations. Disturbances are introduced into the boundary layer by harmonic sources that involve unsteady suction and blowing through the wall. Various harmonic-source generators are implemented on or near the attachment line, and the disturbance evolutions are compared. Previous two-dimensional simulation results and nonparallel theory are compared with the present results. The three-dimensional simulation results for disturbances with quasi-two-dimensional features indicate growth rates of only a few percent larger than pure two-dimensional results; however, the results are close enough to enable the use of the more computationally efficient, two-dimensional approach. However, true three-dimensional disturbances are more likely in practice and are more stable than two-dimensional disturbances. Disturbances generated off (but near) the attachment line spread both away from and toward the attachment line as they evolve. The evolution pattern is comparable to wave packets in flat-plate boundary-layer flows. Suction stabilizes the quasi-two-dimensional attachment-line instabilities, and blowing destabilizes these instabilities; these results qualitatively agree with the theory. Furthermore, suction stabilizes the disturbances that develop off the attachment line. Clearly, disturbances that are generated near the attachment line can supply energy to attachment-line instabilities, but suction can be used to stabilize these instabilities.

A two-dimensional boundary layer encountering a three-dimensional hump

1977 ◽  
Vol 83 (1) ◽  
pp. 163-176 ◽  
Author(s):  
F. T. Smith ◽  
R. I. Sykes ◽  
P. W. M. Brighton
Keyword(s):  
Boundary Layer ◽  
Constant Width ◽  
Three Dimensional ◽  
Two Dimensional ◽  
Flow Properties ◽  
Nonlinear Motion ◽  
Dimensional Boundary ◽  
Incompressible Boundary ◽  
Insight Into ◽  
Steady Laminar

A shallow three-dimensional hump disturbs the two-dimensional incompressible boundary layer developed on an otherwise flat surface. The steady laminar flow is studied by means of a three-dimensional extension of triple-deck theory, so that there is the prospect of separation in the nonlinear motion. As a first step, however, a linearized analysis valid for certain shallow obstacles gives some insight into the flow properties. The most striking features then are the reversal of the secondary vortex motions and the emergence of a ‘corridor’ in the wake of the hump. The corridor stays of constant width downstream and within it the boundary-layer displacement and skin-friction perturbation are much greater than outside. Extending outside the corridor, there is a zone where the surface fluid is accelerated, in contrast with the deceleration near the centre of the corridor. The downstream decay (e.g. of displacement) here is much slower than in two-dimensional flows.

Effect of Adverse Pressure Gradients on Turbulent Boundary Layers in Axisymmetric Conduits

1957 ◽  
Vol 24 (2) ◽  
pp. 191-196
Author(s):  
J. M. Robertson ◽  
J. W. Holl
Keyword(s):  
Boundary Layer ◽  
Flow Parameter ◽  
Three Dimensional ◽  
Turbulent Boundary Layers ◽  
Pressure Gradients ◽  
Two Dimensional ◽  
Flow Conditions ◽  
Straight Pipe ◽  
Outer Flow ◽  
Dimensional Boundary

Abstract The development of the three-dimensional boundary layer in a diffuser with several discharge arrangements has been studied for air flow, in continuation of the work of Uram (1). The flow conditions in a diffuser when followed by a straight pipe, an additional length of the diffuser, or a jet, are compared. Extension of the method of analysis developed by Ross for two-dimensional layers is presented. In some cases the use of three-dimensionally defined parameters leads to different results. Ross’s (2) unique outer-flow parameter is found to be no longer satisfactory. Other outer parameters are presented as possible substitutes.

Modelling the calmed region behind a spot

2005 ◽  
Vol 363 (1830) ◽  
pp. 1069-1078 ◽  
Author(s):  
S.N Brown ◽  
F.T Smith
Keyword(s):  
Boundary Layer ◽  
Theoretical Model ◽  
Slip Velocity ◽  
Three Dimensional ◽  
Cross Flow ◽  
Two Dimensional ◽  
Turbulent Spot ◽  
Mean Flow ◽  
Flow Surface ◽  
Dimensional Boundary

A theoretical model of the laminar ‘calmed region’ following a three-dimensional turbulent spot within a transitioning two-dimensional boundary layer is formulated and discussed. The flow is taken to be inviscid, and the perturbation mean flow surface streamlines calculated represent disturbances to the basic slip velocity. Available experimental evidence shows a fuller, more stable, streamwise profile in a considerable region trailing the spot, with cross-flow ‘inwash’ towards the line of symmetry. Present results are in qualitative agreement with this evidence.

Reynolds stress development in pressure-driven three-dimensional turbulent boundary layers

1989 ◽  
Vol 202 ◽  
pp. 263-294 ◽  
Author(s):  
Shawn D. Anderson ◽  
John K. Eaton
Keyword(s):  
Boundary Layer ◽  
Shear Stress ◽  
Reynolds Stress ◽  
Free Stream ◽  
Three Dimensional ◽  
Radius Of Curvature ◽  
Two Dimensional ◽  
Stress Vector ◽  
Dimensional Boundary ◽  
Cross Wire

The development of the Reynolds stress field was studied for flows in which an initially two-dimensional boundary layer was skewed sideways by a spanwise pressure gradient ahead of an upstream-facing wedge. Two different wedges were used, providing a variation in the boundary-layer skewing. Measurements of all components of the Reynolds stress tensor and all ten triple products were measured using a rotatable cross-wire anemometer. The results show the expected lag of the shear stress vector behind the strain rate. Comparison of the two present experiments with previous data suggests that the lag can be estimated if the radius of curvature of the free-stream streamline is known. The magnitude of the shear stress vector in the plane of the wall is seen to decrease rapidly as the boundary-layer skewing increases. The amount of decrease is apparently related to the skewing angle between the wall and the free stream. The triple products evolve rapidly and profiles in the three-dimensional boundary layer are considerably different than two-dimensional profiles, leaving little hope for gradient transport models for the Reynolds stresses. The simplified model presented by Rotta (1979) performs reasonably well providing that an appropriate value of the T-parameter is chosen.

scholarly journals Cancellation of Tollmien–Schlichting waves with surface heating

2021 ◽  
Vol 128 (1) ◽  
Author(s):  
Georgia S. Brennan ◽  
Jitesh S. B. Gajjar ◽  
Richard E. Hewitt
Keyword(s):  
Boundary Layer ◽  
Asymptotic Methods ◽  
Three Dimensional ◽  
Exact Formula ◽  
Surface Heating ◽  
Two Dimensional ◽  
Boundary Layer Flows ◽  
Dimensional Boundary ◽  
Tollmien Schlichting ◽  
Layer Flow

AbstractTwo-dimensional boundary layer flows in quiet disturbance environments are known to become unstable to Tollmien–Schlichting waves. The experimental work of Liepmann et al. (J Fluid Mech 118:187–200, 1982), Liepmann and Nosenchuck (J Fluid Mech 118:201–204, 1982) showed how it is possible to control and reduce unstable Tollmien–Schlichting wave amplitudes using unsteady surface heating. We consider the problem of an oncoming planar compressible subsonic boundary layer flow with a three-dimensional vibrator mounted on a flat plate, and with surface heating present. It is shown using asymptotic methods based on triple-deck theory that it is possible to choose an unsteady surface heating distribution to cancel out the response due to the vibrator. An approximation based on the exact formula is used successfully in numerical computations to confirm the findings. The results presented here are a generalisation of the analogous results for the two-dimensional problem in Brennan et al. (J Fluid Mech 909:A16-1, 2020).

A Fast Method for the Prediction of Dynamic Stall Onset on Turbomachinery Blades

1997 ◽  
Author(s):  
K. D. Jones ◽  
M. F. Platzer
Keyword(s):  
Boundary Layer ◽  
Dynamic Pressure ◽  
Dynamic Stall ◽  
Navier Stokes ◽  
Fast Method ◽  
Two Dimensional ◽  
Moving Wall ◽  
Dimensional Boundary ◽  
Turbomachinery Blades ◽  
Apparent Disagreement

A computational approach is described for the rapid and systematic prediction and evaluation of the onset of dynamic stall due to rapid incidence changes or unsteady pitch or plunge motions. The method combines an unsteady, two-dimensional panel code with a two-dimensional boundary layer code. The panel code provides incompressible, inviscid flowfields about arbitrary airfoils undergoing prescribed motions. The boundary layer code computes laminar, transitional and turbulent regimes, with transition onset predicted by Michel’s criterion. Presented results demonstrate that the delay in dynamic stall onset is directly related to the dynamic pressure lag, in agreement with previous Navier-Stokes simulations, but in apparent disagreement with several aspects of the ‘moving wall’ analogy suggested in the past as an explanation for delayed dynamic stall onset.

Sign in / Sign up

Export Citation Format

Share Document