Convective Boiling in Vertical Channels With Different Offset Strip Fin Geometries

1989 ◽  
Vol 111 (1) ◽  
pp. 156-165 ◽  
Author(s):  
G. D. Mandrusiak ◽  
V. P. Carey
Keyword(s):  
Heat Transfer ◽  
Heat Transfer Coefficient ◽  
Transfer Coefficient ◽  
Film Flow ◽  
Nucleate Boiling ◽  
Two Phase ◽  
Wall Superheat ◽  
Annular Film ◽  
Two Phase Heat Transfer ◽  
Offset Strip Fin

Newly obtained local heat transfer data are presented for flow boiling of liquids in two partially heated vertical channels with different offset strip fin geometries operating at low to moderate wall superheat levels. Experiments were conducted in special test sections that permitted direct visual observation of the boiling process while simultaneously measuring the heat transfer coefficient along the channel. Data for which nucleate boiling appeared to be completely suppressed were analyzed together with similar results for other offset fin geometries to assess the effects of channel geometry variations on the two-phase heat transfer coefficient during annular film-flow evaporation. For all geometries considered, the data for annular film-flow evaporation were found to correlate well in terms of modified versions of the F and Martinelli parameters used by Bennett and Chen (1980) to correlate similar data for round tubes. For fin matrices of similar size and configuration, the forced convective component of the two-phase heat transfer coefficient was found to be well represented by a single F-parameter correlation curve. However, F-factor correlations for matrices having significant differences in fin and channel dimensions were found to differ substantially. An approximate superposition method for including the contribution of nucleate boiling to the two-phase heat transfer coefficient at low to moderate wall superheat levels is also proposed.

A Loop Thermosyphon With Hydrophobic Spots Evaporator Surface

2018 ◽  
Author(s):  
Hongbin He ◽  
Biao Shen ◽  
Sumitomo Hidaka ◽  
Koji Takahashi ◽  
Yasuyuki Takata
Keyword(s):  
Heat Transfer ◽  
Heat Transfer Coefficient ◽  
Transfer Coefficient ◽  
Nucleate Boiling ◽  
Working Fluid ◽  
Immersion Method ◽  
Two Phase ◽  
Coating Materials ◽  
High Heat Transfer ◽  
Coated Surface

Heat transfer characteristic of a closed two-phase thermosyphon with enhanced boiling surface is studied and compared with that of a copper mirror surface. Two-phase cooling improves heat transfer coefficient (HTC) a lot compared to single-phase liquid cooling. The evaporator surfaces, coated with a pattern of hydrophobic circle spots (non-electroplating Ni-PTFE, 0.5∼2 mm in diameter and 1.5–3 mm in pitch) on Cu substrates, achieve very high heat transfer coefficient and lower the incipience temperature overshoot using water as the working fluid. Sub-atmospheric boiling on the hydrophobic spot-coated surface shows a much better heat transfer performance. Tests with heat loads (30 W to 260 W) reveals the coated surfaces enhance nucleate boiling performance by increasing the bubbles nucleation sites density. Hydrophobic circle spots coated surface with diameter 1 mm, pitch 1.5 mm achieves the maximal heat transfer enhancement with the minimum boiling thermal resistance as low as 0.03 K/W. The comparison of three evaporator surfaces with same spot parameters but different coating materials is carried out experimentally. Ni-PTFE coated surface with immersion method performs the optimal performance of the thermosyphon.

On the Application of Macro-Pipe Two-Phase Heat Transfer Correlations and Flow Regime Maps to Mini-Channels

2006 ◽  
Author(s):  
Avram Bar-Cohen ◽  
Ilai Sher ◽  
Emil Rahim
Keyword(s):  
Heat Transfer ◽  
Heat Transfer Coefficient ◽  
Transfer Coefficient ◽  
Flow Regime ◽  
Annular Flow ◽  
Negative Slope ◽  
Two Phase ◽  
Heat Transfer Correlations ◽  
Two Phase Heat Transfer ◽  
Flow Regime Maps

The present study is aimed at evaluating the ability of conventional “macro-pipe” correlations and regime transitions to predict the two-phase thermofluid characteristics of mini-channel cold plates. Use is made of the Taitel-Dukler flow regime maps, seven classical heat transfer coefficient correlations and two dryout predictions. The vast majority of the mini-channel two-phase heat-transfer data, taken from the literature, is predicted to fall in the annular regime, in agreement with the reported observations. A characteristic heat transfer coefficient locus has been identified, with a positive slope following the transition from Intermittent to Annular flow and a negative slope following the onset of partial dryout at higher qualities. While the classical two-phase heat transfer correlations are generally capable of providing good agreement with the low-quality annular flow data the quality at which partial dryout occurs and the ensuing heat transfer rates are not predictable by the available macro-pipe correlations.

Two-Phase Heat Transfer Performance of Dielectric Fluid HFE-7100 Within Multiport Microchannel

2008 ◽  
Author(s):  
Lung-Yi Lin ◽  
Yeau-Ren Jeng ◽  
Chi-Chuan Wang
Keyword(s):  
Heat Transfer ◽  
Heat Transfer Coefficient ◽  
Transfer Coefficient ◽  
Single Phase ◽  
Heat Transfer Performance ◽  
Convective Heat Transfer Coefficient ◽  
Dielectric Fluid ◽  
Transfer Performance ◽  
Two Phase ◽  
Two Phase Heat Transfer

This study presents convective single-phase and boiling two-phase heat transfer performance of HFE-7100 coolant within multi-port microchannel heat sinks. The corresponding hydraulic diameters are 450 and 237 μm, respectively. For single-phase results, the presence of inlet/outlet locations inevitably gives rise to considerable increase of total pressure drop of a multi-port microchannel heat sink whereas has virtually no detectable influence on overall heat transfer performance provided that the effect of entrance has been accounted for. The convective boiling heat transfer coefficient for the HFE-7100 coolant shows a tremendous drop when vapor quality is above 0.6. For Dh = 450 μm, it is found that the mass flux effect on the convective heat transfer coefficient is rather small.

Investigation of Two Phase Heat Transfer Coefficients of Cryogenic Mixed Refrigerants

2013 ◽  
Author(s):  
Seungwhan Baek ◽  
Sangkwon Jeong
Keyword(s):  
Heat Transfer ◽  
Heat Transfer Coefficient ◽  
Heat Exchanger ◽  
Transfer Coefficient ◽  
Transfer Coefficients ◽  
Two Phase ◽  
Microchannel Heat Exchanger ◽  
Heat Transfer Coefficients ◽  
Evaporation Heat ◽  
Two Phase Heat Transfer

Mixed Refrigerant Joule Thomson (MR-JT) refrigerators are widely used in various kinds of cryogenic systems these days. Although heat transfer coefficient estimation for a multiphase and multi-component fluid in cryogenic temperature range is necessarily required in the heat exchanger design of MR-JT refrigerator, it has been rarely discussed so far. In this paper, condensation and evaporation heat transfer coefficients of mixed refrigerant are measured in a microchannel heat exchanger. Printed Circuit Heat Exchanger (PCHE) has been developed as a compact microchannel heat exchanger and used in the experiment. Several two-phase heat transfer coefficient correlations are examined to discuss the experimental measurement results. The result of this paper shows that cryogenic mixed refrigerant heat transfer coefficients can be estimated by conventional two-phase heat transfer coefficient correlations.

Prediction of the Heat Transfer Coefficient in a Small Channel with the Superposition and Asymptotic Correlations

2018 ◽  
Vol 26 (01) ◽  
pp. 1850001
Author(s):  
Yushazaziah Mohd-Yunos ◽  
Normah Mohd-Ghazali ◽  
Maziah Mohamad ◽  
Agus Sunjarianto Pamitran ◽  
Jong-Taek Oh
Keyword(s):  
Heat Transfer ◽  
Heat Transfer Coefficient ◽  
Transfer Coefficient ◽  
Experimental Work ◽  
Nucleate Boiling ◽  
Vapor Quality ◽  
Two Phase ◽  
Forced Convective Heat Transfer ◽  
Small Channel ◽  
The Heat Transfer Coefficient

Heat transfer coefficient as an important characteristic in heat exchanger design is determined by the correlation developed from previous experimental work or accumulation of published data. Although discrepancies still exist between the existing correlations and practical data, several researchers claimed theirs as a generalized heat transfer correlation. Through optimization method, this study predicts the heat transfer coefficient of two-phase flow of propane in a small channel at the saturation temperature of 10[Formula: see text]C using two categories of correlation — superposition and asymptotic. Both methods consist of the contribution of nucleate boiling and forced convective heat transfer, the mechanisms that contribute to the total two-phase heat transfer coefficient, which become as two objective functions to be maximized. The optimization of experimental parameters of heat flux, mass flux, channel diameter and vapor quality is done by using genetic algorithm within a range of 5–20[Formula: see text]kW/m2, 100–250[Formula: see text]kg/m2[Formula: see text]s, 1.5–3[Formula: see text]mm and 0.009–0.99, respectively. In the result, the selected correlations under optimized condition agreed on the dominant mechanism at low and high vapor qualities are caused by the nucleate boiling and forced convective heat transfer, respectively. The optimization work served as an alternative approach in identifying optimized parameters from different correlations to achieve high heat transfer coefficient by giving a fast prediction of parameter range, particularly for the investigation of any new refrigerant. In parallel with some experimental works, a quick prediction is possible to reduce time and cost. From the four selected generalized correlations, Bertsch et al. show the closer trend with the reference experimental work until vapor quality of 0.6.

Experimental Investigation and Empirical Analysis of Non-Boiling Gas-Liquid Two Phase Heat Transfer in Vertical Downward Pipe Orientation

2012 ◽  
Author(s):  
Swanand M. Bhagwat ◽  
Mehmet Mollamahmutoglu ◽  
Afshin J. Ghajar
Keyword(s):  
Heat Transfer ◽  
Heat Transfer Coefficient ◽  
Transfer Coefficient ◽  
Annular Flow ◽  
Single Phase ◽  
Phase Flow ◽  
Upward Flow ◽  
Two Phase ◽  
Reynolds Analogy ◽  
Two Phase Heat Transfer

The non-boiling gas-liquid two phase flow is pertinent to industrial applications like the reduction of paraffin wax depositions in petroleum transport lines, air lift systems and the chemical processes such as ethanol-water fractionation seeking enhanced heat and mass transfer. The non-boiling two phase heat transfer mechanism in horizontal and vertical orientations has been investigated by many researchers. However, till date very little experimental work and investigation has been performed for vertical downward flow. In order to contribute more to this research and have a better understanding of the non-boiling two phase heat transfer phenomenon for this pipe orientation, experimental investigation is undertaken for a vertical downward oriented 0.01252 m I.D. schedule 10 S stainless steel pipe using air-water as fluid combination. The influence of different flow patterns on the two phase convective heat transfer coefficient is studied using experimental measurements of 165 data points for bubbly, slug, froth, falling film and annular flow patterns spanned over the entire range of the void fraction. In general the two phase heat transfer coefficients are found to be consistently higher than that of the single phase flow. This tendency is observed to increase with increase in the gas flow rate as the flow regime migrates from bubbly to the annular flow. The concept of Reynolds analogy as implemented by Tang and Ghajar [1] for horizontal and vertical upward flow is analyzed against the vertical downward flow data collected in the present study. Due to lack of correlations available for predicting the two phase heat transfer coefficient in vertical downward orientation it was decided to perform the quantitative analysis of the seventeen two phase heat transfer correlations available for vertical upward flow. This analysis is concluded by the recommendation of the top performing correlations in the literature for each flow pattern. Based on the pressure drop data and using Reynolds analogy, a simple equation is proposed to correlate the two phase heat transfer coefficient with the single phase heat transfer coefficient.

Sign in / Sign up

Export Citation Format

Share Document