A Geometrical Representation of Manipulator Dynamics and Its Application to Arm Design

1983 ◽  
Vol 105 (3) ◽  
pp. 131-142 ◽  
Author(s):  
Haruhiko Asada
Keyword(s):  
Rigid Body ◽  
Mass Distribution ◽  
Dynamic Characteristics ◽  
Graphical Representation ◽  
Rigid Bodies ◽  
Geometrical Configuration ◽  
New Approach ◽  
Geometrical Representation ◽  
Manipulator Dynamics ◽  
Inertia Ellipsoid

A new approach to the geometrical representation of manipulator dynamics is presented. The inertia ellipsoid, which is used to represent dynamic characteristics of a single rigid body, is extended to a general ellipsoid for a series of rigid bodies in order to represent the manipulator dynamics. The geometrical configuration of the generalized inertia ellipsoid (GIE) represents the characteristics of the manipulator as a whole. One can understand the complicated inertial effect and nonlinearity of multi-degree-of-freedom motion by simply investigating the GIE configuration. In the latter half of the paper, this method is applied to aid the design of a mechanical arm, in which dimensions of an arm structure and its mass distribution are optimized through the evaluation and graphical representation of the arm dynamics.

A New Approach to the Synthesis of Spherical Mechanisms for Rigid Body Guidance

1992 ◽  
Author(s):  
Can Li
Keyword(s):  
Rigid Body ◽  
Rigid Bodies ◽  
New Approach ◽  
Spherical Mechanisms

Abstract This paper develops a series of formulae for spherical displacement of rigid bodies. With use of these formulae, the problems of synthesizing spherical four-link and six-link mechanisms for rigid body guidance are studied.

scholarly journals ClusterSLAM: A SLAM backend for simultaneous rigid body clustering and motion estimation

2021 ◽  
Author(s):  
Jiahui Huang ◽  
Sheng Yang ◽  
Zishuo Zhao ◽  
Yu-Kun Lai ◽  
Shi-Min Hu
Keyword(s):  
Motion Estimation ◽  
Rigid Body ◽  
Iterative Scheme ◽  
Dynamic Environments ◽  
Rigid Bodies ◽  
Factor Graph ◽  
Agglomerative Clustering ◽  
Multiple Objects ◽  
Graph Optimization ◽  
Dynamic Objects

AbstractWe present a practical backend for stereo visual SLAM which can simultaneously discover individual rigid bodies and compute their motions in dynamic environments. While recent factor graph based state optimization algorithms have shown their ability to robustly solve SLAM problems by treating dynamic objects as outliers, their dynamic motions are rarely considered. In this paper, we exploit the consensus of 3D motions for landmarks extracted from the same rigid body for clustering, and to identify static and dynamic objects in a unified manner. Specifically, our algorithm builds a noise-aware motion affinity matrix from landmarks, and uses agglomerative clustering to distinguish rigid bodies. Using decoupled factor graph optimization to revise their shapes and trajectories, we obtain an iterative scheme to update both cluster assignments and motion estimation reciprocally. Evaluations on both synthetic scenes and KITTI demonstrate the capability of our approach, and further experiments considering online efficiency also show the effectiveness of our method for simultaneously tracking ego-motion and multiple objects.

The Use of Projective Geometry on the Mechanism System Motion and Stability of the Special Problems in Judgement

2012 ◽  
Vol 482-484 ◽  
pp. 1041-1044
Author(s):  
Xiao Zhuang Song ◽  
Ming Liang Lu ◽  
Tao Qin
Keyword(s):  
Rigid Body ◽  
Projective Geometry ◽  
Euclidean Geometry ◽  
Specific Problem ◽  
Zero Point ◽  
Rigid Bodies ◽  
Parallel Connection ◽  
Fixed Plane ◽  
Instantaneous Center ◽  
Proof Of Principle

In a principle of kinematics, when a rigid body is motion in a plane, and the fixed plane only the presence of a speed zero point -- the instantaneous center of velocity. In the mechanism of two rigid bodies be connected by two parallel connection links, why can the continuous relative translation? Where is the instantaneous center of velocity? ... ... The traditional Euclidean geometry theory can’t explain these phenomenon, must use projective geometry theory to solve. The actual motion of the mechanism is disproof in Euclidean geometry principle limitation. This paper introduces the required in projective geometry basic proof of principle, and applied to a specific problem.

On the Motion of Lineal Bodies Subject to Linear Damping

1997 ◽  
Vol 64 (1) ◽  
pp. 227-229 ◽  
Author(s):  
M. F. Beatty
Keyword(s):  
Differential Equation ◽  
Dynamical Systems ◽  
Rigid Body ◽  
General Class ◽  
Plane Motion ◽  
Rigid Bodies ◽  
Degree Of Freedom ◽  
Single Degree Of Freedom ◽  
Single Degree ◽  
Linear Damping

Wilms (1995) has considered the plane motion of three lineal rigid bodies subject to linear damping over their length. He shows that these plane single-degree-of-freedom systems are governed by precisely the same fundamental differential equation. It is not unusual that several dynamical systems may be formally characterized by the same differential equation, but the universal differential equation for these systems is unusual because it is exactly the same equation for the three very different systems. It is shown here that these problems belong to a more general class of problems for which the differential equation is exactly the same for every lineal rigid body regardless of its geometry.

Closed-Form Determination of the Location of a Rigid Body by Seven In-Parallel Linear Transducers

1996 ◽  
Author(s):  
Carlo Innocenti
Keyword(s):  
Rigid Body ◽  
Linear Equations ◽  
Parallel Manipulators ◽  
Rigid Bodies ◽  
Body Location ◽  
Position And Orientation ◽  
General Geometry ◽  
Two Bodies

Abstract The paper presents an original analytic procedure for unambiguously determining the relative position and orientation (location) of two rigid bodies based on the readings from seven linear transducers. Each transducer connects two points arbitrarily chosen on the two bodies. The sought-for rigid-body location simply results by solving linear equations. The proposed procedure is suitable for implementation in control of fully-parallel manipulators with general geometry. A numerical example shows application of the reported results to a case study.

An Approach to Dynamic Fusion of the Knowledge Maps of an Activities Process

2015 ◽  
Vol 7 (4) ◽  
pp. 1-26 ◽  
Author(s):  
Menaouer Brahami ◽  
Baghdad Atmani ◽  
Nada Matta
Keyword(s):  
Graphical Representation ◽  
Knowledge Engineering ◽  
Decision Support Tool ◽  
Knowledge Mapping ◽  
Fusion Algorithm ◽  
Knowledge Maps ◽  
New Approach ◽  
Support Tool ◽  
Mapping Techniques ◽  
The One

The interest of companies for a greater valuation of their information, knowledge and competency is increasing. These companies have a knowledge capital (tacit and explicit) often poorly exploited. These information resources include knowledge and information useful and necessary to the execution of trades' processes and that it will be captured and formalized by using knowledge engineering methods, such as knowledge mapping techniques. In this context, the authors present a new approach to dynamic fusion of knowledge maps for an activities process that builds on the one hand, the graphical representation of the knowledge mapping and the boolean modelling of the graph (MBG). On the other hand, the authors' fusion algorithm of the maps which relies on notions of “index” type which allows determines the type of node of map to merge their fusion algorithm of the maps which relies on notions of “index” type which allows determines the type of node to merge and on notions of the boolean modelling of the knowledge maps. The authors finally implemented this algorithm to obtain experimental results. This result can be used as a decision support tool, whether individual or collective.

THE CALIBRATION OF AN ARRAY OF ACCELEROMETERS

2011 ◽  
Vol 35 (2) ◽  
pp. 251-267 ◽  
Author(s):  
Dany Dubé ◽  
Philippe Cardou
Keyword(s):  
Angular Velocity ◽  
Rigid Body ◽  
Least Squares ◽  
Calibration Method ◽  
Calibration Procedure ◽  
Rigid Bodies ◽  
New Method ◽  
Scale Factors ◽  
Array Calibration ◽  
The One

An accelerometer-array calibration method is proposed in this paper by which we estimate not only the accelerometer offsets and scale factors, but also their sensitive directions and positions on a rigid body. These latter parameters are computed from the classical equations that describe the kinematics of rigid bodies, and by measuring the accelerometer-array displacements using a magnetic sensor. Unlike calibration schemes that were reported before, the one proposed here guarantees that the estimated accelerometer-array parameters are globally optimum in the least-squares sense. The calibration procedure is tested on OCTA, a rigid body equipped with six biaxial accelerometers. It is demonstrated that the new method significantly reduces the errors when computing the angular velocity of a rigid body from the accelerometer measurements.

On Higher Order Point-Line and the Associated Rigid Body Motions

2006 ◽  
Vol 129 (2) ◽  
pp. 166-172 ◽  
Author(s):  
Yi Zhang ◽  
Kwun-Lon Ting
Keyword(s):  
Rigid Body ◽  
Higher Order ◽  
Rigid Bodies ◽  
Rigid Body Motion ◽  
Body Motion ◽  
Dual Quaternion ◽  
Displacement Operator ◽  
Screw Motion ◽  
Rigid Body Motions ◽  
Point Line

This paper presents a study on the higher-order motion of point-lines embedded on rigid bodies. The mathematic treatment of the paper is based on dual quaternion algebra and differential geometry of line trajectories, which facilitate a concise and unified description of the material in this paper. Due to the unified treatment, the results are directly applicable to line motion as well. The transformation of a point-line between positions is expressed as a unit dual quaternion referred to as the point-line displacement operator depicting a pure translation along the point-line followed by a screw displacement about their common normal. The derivatives of the point-line displacement operator characterize the point-line motion to various orders with a set of characteristic numbers. A set of associated rigid body motions is obtained by applying an instantaneous rotation about the point-line. It shows that the ISA trihedrons of the associated rigid motions can be simply depicted with a set of ∞2 cylindroids. It also presents for a rigid body motion, the locus of lines and point-lines with common rotation or translation characteristics about the line axes. Lines embedded in a rigid body with uniform screw motion are presented. For a general rigid body motion, one may find lines generating up to the third order uniform screw motion about these lines.

scholarly journals Formulation and Simulations of the Conserving Algorithm for Feedback Stabilization on Rigid Body Rotations

2014 ◽  
Vol 2014 ◽  
pp. 1-11
Author(s):  
Yong-Ren Pu ◽  
Thomas A. Posbergh
Keyword(s):  
Rigid Body ◽  
Closed Loop ◽  
Numerical Algorithms ◽  
Open Loop ◽  
Rigid Bodies ◽  
Feedback Stabilization ◽  
Conserved Quantities ◽  
Control Laws ◽  
Loop Control ◽  
Closed Loop Systems

The problem of stabilization of rigid bodies has received a great deal of attention for many years. People have developed a variety of feedback control laws to meet their design requirements and have formulated various but mostly open loop numerical algorithms for the dynamics of the corresponding closed loop systems. Since the conserved quantities such as energy, momentum, and symmetry play an important role in the dynamics, we investigate the conserved quantities for the closed loop control systems which formally or asymptotically stabilize rigid body rotation and modify the open loop numerical algorithms so that they preserve these important properties. Using several examples, the authors first use the open loop algorithm to simulate the tumbling rigid body actions and then use the resulting closed loop one to stabilize them.

scholarly journals Extension Effects in Compliant Joints and Pseudo-Rigid-Body Models

2016 ◽  
Vol 138 (9) ◽  
Author(s):  
Venkatasubramanian Kalpathy Venkiteswaran ◽  
Hai-Jun Su
Keyword(s):  
Aspect Ratio ◽  
Rigid Body ◽  
Timoshenko Beam ◽  
Beam Theory ◽  
Timoshenko Beam Theory ◽  
Element Analysis ◽  
Thin Beam ◽  
New Approach ◽  
Compliant Joints ◽  
Euler Bernoulli Beam

Compliant members come in a variety of shapes and sizes. While thin beam flexures are commonly used in this field, they can be replaced by soft members with lower aspect ratio. This paper looks to study the behavior of such elements by analyzing them from the view of beam theory for 2D cases. A modified version of the Timoshenko beam theory is presented which incorporates extension and Poisson's effects. The utility and validity of the new approach are demonstrated by comparing against Euler–Bernoulli beam theory, Timoshenko beam theory, and finite-element analysis (FEA). The results from this are then used to study the performance of pseudo-rigid-body models (PRBMs) for the analysis of low aspect ratio soft compliant joints for 2D quasi-static applications. A parallel-guiding mechanism comprised of similar compliant elements is analyzed using the new results to validate the contribution of this work.

Sign in / Sign up

Export Citation Format

Share Document