Coupled Deformation Modes in the Large Deformation Finite Element Analysis: Generalization

2009 ◽  
Vol 4 (2) ◽  
Author(s):  
Oleg N. Dmitrochenko ◽  
Bassam A. Hussein ◽  
Ahmed A. Shabana
Keyword(s):  
Continuum Mechanics ◽  
Absolute Nodal Coordinate Formulation ◽  
Flexible Structures ◽  
Three Dimensional ◽  
Numerical Results ◽  
Elastic Line ◽  
Absolute Nodal Coordinate ◽  
Plate Elements ◽  
General Continuum ◽  
Deformation Modes

The effect of the absolute nodal coordinate formulation (ANCF)–coupled deformation modes on the accuracy and efficiency when higher order three-dimensional beam and plate finite elements are used is investigated in this study. It is shown that while computational efficiency can be achieved in some applications by neglecting the effect of some of the ANCF-coupled deformation modes, such modes introduce geometric stiffening/softening effects that can be significant in the case of very flexible structures. As shown in previous publications, for stiff structures, the effect of the ANCF-coupled deformation modes can be neglected. For such stiff structures, the solution does not strongly depend on some of the ANCF-coupled deformation modes, and formulations that include these modes lead to numerical results that are in good agreement with formulations that exclude them. In the case of a very flexible structure, on the other hand, the inclusion of the ANCF-coupled deformation modes becomes necessary in order to obtain an accurate solution. In this case of very flexible structures, the use of the general continuum mechanics approach leads to an efficient solution algorithm and to more accurate numerical results. In order to examine the effect of the elastic force formulation on the efficiency and the coupling between different modes of deformation, three different models are used again to formulate the elastic forces in the absolute nodal coordinate formulation. These three methods are the general continuum mechanics approach, the elastic line (midsurface) approach, and the elastic line (midsurface) approach with the Hellinger–Reissner principle. Three-dimensional absolute nodal coordinate formulation beam and plate elements are used in this study. In the general continuum mechanics approach, the coupling between the cross section deformation and the beam centerline or plate midsurface displacement is considered, while in the approaches based on the elastic line and the Hellinger–Reissner principle, this coupling is neglected. In addition to the fully parametrized beam element used in this study, three different plate elements, two fully parametrized and one reduced order thin plate elements, are used. The numerical results obtained using different finite elements and elastic force formulations are compared in this study.

Absolute Nodal Coordinate Formulation Coupled Deformation Modes

2006 ◽  
Author(s):  
Bassam A. Hussein ◽  
Hiroyuki Sugiyama ◽  
Ahmed A. Shabana
Keyword(s):  
Finite Element ◽  
Cross Section ◽  
Absolute Nodal Coordinate Formulation ◽  
Flexible Structures ◽  
Mindlin Plate ◽  
Elastic Line ◽  
Absolute Nodal Coordinate ◽  
Geometric Stiffening ◽  
General Continuum ◽  
Deformation Modes

The finite element absolute nodal coordinate formulation (ANCF) leads to beam and plate models that relax the assumption of the classical Euler-bernoulli and Timoshenko beam and Mindlin plate theories. In these more general models, the cross section is allowed to deform and it is no longer treated as a rigid surface. The coupling between the bending and cross section deformations leads to the new ANCF-coupled deformation modes that are examined in this study. While these coupled deformation can be source of numerical and convergence problems when thin and stiff beam models are considered, the inclusion of the effect of these modes in the dynamic model is necessary in the case of very flexible structures. In order to examine the effect of these coupled deformation modes in this investigation, three different large deformation dynamic beam models are discussed. Two of these models, which differ in the way the beam elastic forces are calculated in the absolute nodal coordinate formulation, allow for systematically eliminating the coupled deformation modes, while the third allows for including these modes. The first of these models is based on a general continuum mechanics approach that leads to a model that includes the ANCF-coupled deformation modes; while the second and third methods that can be used to eliminate the coupled deformation modes are based on the elastic line approach and the Hellinger-Reissner principle. It is shown in this study that the inclusion of the ANCF-coupled deformation modes introduces geometric stiffening effects that can not be captured using other finite element models.

Comparison of Three-Dimensional Flexible Beam Elements for Dynamic Analysis: Classical Finite Element Formulation and Absolute Nodal Coordinate Formulation

2009 ◽  
Vol 5 (1) ◽  
Author(s):  
A. L. Schwab ◽  
J. P. Meijaard
Keyword(s):  
Dynamic Analysis ◽  
Absolute Nodal Coordinate Formulation ◽  
Three Dimensional ◽  
Flexible Beam ◽  
Element Formulation ◽  
Shear Locking ◽  
Elastic Line ◽  
Absolute Nodal Coordinate ◽  
Beam Elements ◽  
Bending Mode

Three formulations for a flexible spatial beam element for dynamic analysis are compared: a Timoshenko beam with large displacements and rotations, a fully parametrized element according to the absolute nodal coordinate formulation (ANCF), and an ANCF element based on an elastic line approach. In the last formulation, the shear locking of the antisymmetric bending mode is avoided by the application of either the two-field Hellinger–Reissner or the three-field Hu–Washizu variational principle. The comparison is made by means of linear static deflection and eigenfrequency analyses on stylized problems. It is shown that the ANCF fully parametrized element yields too large torsional and flexural rigidities, and shear locking effectively suppresses the antisymmetric bending mode. The presented ANCF formulation with the elastic line approach resolves most of these problems.

Improved Description of Elastic Forces for the Absolute Nodal Coordinate Based Plate Element

2005 ◽  
Author(s):  
Marko K. Matikainen ◽  
Aki M. Mikkola
Keyword(s):  
Finite Element ◽  
Continuum Mechanics ◽  
Absolute Nodal Coordinate Formulation ◽  
Three Dimensional ◽  
Plate Element ◽  
Absolute Nodal Coordinate ◽  
Finite Element Software ◽  
Elastic Forces ◽  
The Absolute ◽  
The Continuum

In this study, the improved description of elastic forces for the absolute nodal coordinate based plate element is introduced. The absolute nodal coordinate formulation, which utilizes global displacements and slope coordinates as nodal variables, can be used in large rotation and deformation dynamic analysis of beam and plate structures. The formulation avoids difficulties that arise when a rotation is interpolated in three-dimensional applications. In the absolute nodal coordinate formulation, a continuum mechanics approach has become the dominating procedure when elastic forces are defined. It has recently been perceived, however, that the continuum mechanics based absolute nodal coordinate elements suffer from serious shortcomings, including Poisson’s locking and poor convergence rate. These problems can be circumvented by modifying the displacement field of a finite element in the definition of elastic forces. This allows the use of the mixed type interpolation technique, leading to accurate and efficient finite element formulations. This approach has been previously applied to two- and three-dimensional absolute nodal coordinate based finite elements. In this study, the improved approach for elastic forces is extended to the absolute nodal coordinate plate element. The introduced plate element is compared in static examples to the continuum mechanics based absolute nodal coordinate plate element, as well as to commercial finite element software.

A Non-Incremental Nonlinear Finite Element Solution for Cable Problems

2003 ◽  
Author(s):  
Hiroyuki Sugiyama ◽  
Aki M. Mikkola ◽  
Ahmed A. Shabana
Keyword(s):  
Finite Element ◽  
Linear Theory ◽  
Continuum Mechanics ◽  
Absolute Nodal Coordinate Formulation ◽  
Nonlinear Finite Element ◽  
Element Formulation ◽  
Absolute Nodal Coordinate ◽  
Cable Theory ◽  
General Continuum ◽  
Good Agreement

In this investigation, a nonlinear finite element method for the large deformation and rotation of cable problems is presented. This method is based on the finite element absolute nodal coordinate formulation that guarantees the continuity of all the displacement gradients and leads to a constant mass matrix. The classical cable theory is first reviewed and the assumptions used in this linear theory are defined in order to demonstrate the basic differences between the linear theory and the nonlinear finite element formulation proposed in this paper for cable applications. The elastic cable forces in the absolute nodal coordinate formulation are obtained in this investigation using a general continuum mechanics approach that accounts for the effect of all geometric nonlinearities. It is shown in this investigation that the use of the general continuum mechanics approach leads to a simpler and more efficient formulation as compared to the use of the assumptions of the linear theory that employs a local finite element coordinate system. The results obtained using the absolute nodal coordinate formulation show a good agreement with the results obtained using the classical cable theory when linear cable problems are considered. The results of this investigation obtained using explicit numerical integration also show the potential of the proposed finite element formulation in the nonlinear analysis of cables that experience large rotations and large deformations. It is also shown that the use of perturbation methods to linearize the finite element equations of motion leads to modal characteristics results that are in a good agreement with the linear theory. The generalization of the procedure presented in this paper to three-dimensional cable problems is demonstrated and the computer implementation in multibody algorithms is discussed.

The Three Dimensional Gradient Deficient Beam Element (BEAM9) Using the Absolute Nodal Coordinate Formulation

2014 ◽  
Author(s):  
Abdel-Nasser A. Mohamed ◽  
Jeff Liu
Keyword(s):  
Absolute Nodal Coordinate Formulation ◽  
Three Dimensional ◽  
Beam Element ◽  
Elastic Force ◽  
Nonlinear Material ◽  
Force Model ◽  
Shear Deformations ◽  
Elastic Line ◽  
Absolute Nodal Coordinate ◽  
The Absolute

In this investigation, a three dimensional gradient deficient beam element (BEAM9) using the absolute nodal coordinate formulation (ANCF) is introduced. This element has nine coordinates per node, this includes the position vector and the two gradient vectors rx and ry. Like most of the ANCF elements, this element has constant mass matrix and zero centrifugal and Coriolis inertia forces. The plane strain elastic force model and the elastic line approach are two elastic force models presented in this paper in order to simulate the element internal resistance. Both models support resistance to the general bending and twist moments. The possibilities of employing nonlinear material models will be discussed in future work. Furthermore, the proposed element has the advantage of easy integration over general cross section area that is not easy to perform using the fully parameterized ANCF beam element (BEAM12). Comparing to the ANCF cable element (BEAM6), the proposed element can resist general bending and twist loads. Moreover, shear deformations in the xy plane due to shear force and in the yz plane due to twist moment are considered with the gradient deficient beam element proposed in this work. However, no shear deformations are considered with the ANCF cable element. Comparing to the fully parameterized ANCF beam element, the gradient deficient beam element (BEAM9) avoids some locking issues, shows better computational efficiency and offers better convergency characteristics. Numerical examples are presented in order to validate the proposed gradient deficient beam element and to compare with other ANCF beam elements.

A Non-Incremental Nonlinear Finite Element Solution for Cable Problems

2003 ◽  
Vol 125 (4) ◽  
pp. 746-756 ◽  
Author(s):  
Hiroyuki Sugiyama ◽  
Aki M. Mikkola ◽  
Ahmed A. Shabana
Keyword(s):  
Finite Element ◽  
Linear Theory ◽  
Continuum Mechanics ◽  
Absolute Nodal Coordinate Formulation ◽  
Nonlinear Finite Element ◽  
Element Formulation ◽  
Absolute Nodal Coordinate ◽  
Cable Theory ◽  
General Continuum ◽  
Good Agreement

In this investigation, a nonlinear finite element method for the large deformation and rotation of cable problems is presented. This method is based on finite element absolute nodal coordinate formulation that guarantees the continuity of all displacement gradients and leads to a constant mass matrix. The classical cable theory is first reviewed and the assumptions used in this linear theory are defined in order to demonstrate the basic differences between the linear theory and the nonlinear finite element formulation proposed in this paper for cable applications. The elastic cable forces in the absolute nodal coordinate formulation are obtained using a general continuum mechanics approach that accounts for the effect of all geometric nonlinearities. It is shown in this investigation that the use of the general continuum mechanics approach leads to a simpler and more efficient formulation as compared to the use of the assumptions of the linear theory that employs a local finite element coordinate system. The results obtained using the absolute nodal coordinate formulation show a good agreement with the results obtained using the classical cable theory when linear cable problems are considered. In particular it is shown that the use of perturbation methods to linearize the finite element equations of motion leads to modal characteristics results that are in a good agreement with the linear theory. The results of this investigation obtained using explicit numerical integration also show the potential of the proposed finite element formulation in the nonlinear analysis of cables that experience large rotations and deformations. The generalization of the procedure presented in this paper to three-dimensional cable problems is demonstrated and the computer implementation in multibody algorithms is discussed.

Development of Elastic Forces for a Large Deformation Plate Element Based on the Absolute Nodal Coordinate Formulation

2005 ◽  
Vol 1 (2) ◽  
pp. 103-108 ◽  
Author(s):  
Aki M. Mikkola ◽  
Marko K. Matikainen
Keyword(s):  
Finite Element ◽  
Dynamic Analysis ◽  
Continuum Mechanics ◽  
Absolute Nodal Coordinate Formulation ◽  
Three Dimensional ◽  
Plate Element ◽  
Absolute Nodal Coordinate ◽  
Elastic Forces ◽  
The Absolute ◽  
The Continuum

Dynamic analysis of large rotation and deformation can be carried out using the absolute nodal coordinate formulation. This formulation, which utilizes global displacements and slope coordinates as nodal variables, make it possible to avoid the difficulties that arise when a rotation is interpolated in three-dimensional applications. In the absolute nodal coordinate formulation, a continuum mechanics approach has become the dominating procedure when elastic forces are defined. It has recently been perceived, however, that the continuum mechanics based absolute nodal coordinate elements suffer from serious shortcomings, including Poisson’s locking and poor convergence rate. These problems can be circumvented by modifying the displacement field of a finite element in the definition of elastic forces. This allows the use of the mixed type interpolation technique, leading to accurate and efficient finite element formulations. This approach has been previously applied to two- and three-dimensional absolute nodal coordinate based finite elements. In this study, the improved approach for elastic forces is extended to the absolute nodal coordinate plate element. The introduced plate element is compared in static examples to the continuum mechanics based absolute nodal coordinate plate element, as well as to commercial finite element software. A simple dynamic analysis is performed using the introduced element in order to demonstrate the capability of the element to conserve energy.

Numerical Investigation of Dynamics of the Flexible Riser by Applying Absolute Nodal Coordinate Formulation

2021 ◽  
Vol 55 (5) ◽  
pp. 179-195
Author(s):  
Luu Quang Hung ◽  
Zhuang Kang ◽  
Li Shaojie
Keyword(s):  
Absolute Nodal Coordinate Formulation ◽  
Flexible Structures ◽  
Beam Model ◽  
Environmental Load ◽  
The Finite Element Method ◽  
Ocean Engineering ◽  
Flexible Riser ◽  
Absolute Nodal Coordinate ◽  
Static And Dynamic Characteristics ◽  
Load Conditions

Abstract In this paper, the dynamics of the flexible riser are investigated based on the absolute nodal coordinate formulation (ANCF). The stiffness, generalized elastic force, external load, and mass matrixes of the element are deduced based on the principle of energy conversion and assembled with the finite element method. The motion equation of the flexible riser is established. The influence of the environmental load conditions on the flexible riser model is studied in the MATLAB environment. Moreover, the accuracy and reliability of the programs are verified for a beam model with theoretical solutions. Finally, the static and dynamic characteristics of the flexible riser are analyzed, systematically adopting the ANCF method, which in turn proves the effectiveness and feasibility of the ANCF. Therefore, the proposed method is a powerful scheme for investigating the dynamics of flexible structures with large deformation in ocean engineering.

Sign in / Sign up

Export Citation Format

Share Document