Analysis and Comparison of Active Solar Desiccant and Absorption Cooling Systems: Part II—Annual Simulation Results

1991 ◽  
Vol 113 (1) ◽  
pp. 31-35 ◽  
Author(s):  
Marshuri L. Warren ◽  
Michael Wahlig
Keyword(s):  
Comparative Analysis ◽  
System Performance ◽  
Cooling System ◽  
Companion Paper ◽  
Vapor Compression ◽  
Ventilation Mode ◽  
Cooling Systems ◽  
Absorption Cooling ◽  
Common Framework ◽  
Simulation Results

A comparative analysis has been performed to compare the cooling and dehumidification performance of future ventilation mode desiccant systems, proposed advanced absorption systems, and conventional vapor compression systems. A common framework has been developed for direct comparison of these different cooling technologies; this method is described in a companion paper. This paper presents the application of this method to annual simulations of cooling system performance in five cities.

Analysis and Comparison of Active Solar Desiccant and Absorption Cooling Systems: Part I—Model Description

1991 ◽  
Vol 113 (1) ◽  
pp. 25-30 ◽  
Author(s):  
Mashuri L. Warren ◽  
Michael Wahlig
Keyword(s):  
Comparative Analysis ◽  
Companion Paper ◽  
Model Description ◽  
Vapor Compression ◽  
Ventilation Mode ◽  
Cooling Systems ◽  
Absorption Cooling ◽  
Common Framework ◽  
Vapor Compression Systems

A comparative analysis has been performed to compare the cooling and dehumidification performance of future ventilation-mode desiccant systems, proposed advanced absorption systems, and conventional vapor compression systems. A common framework has been developed for direct comparison of these different cooling technologies; this method is described in this paper. A companion paper presents the application of this method to specific cooling systems in five cities.

scholarly journals Comparative Analysis for Renovation of an air Heating and Cooling System from a Romanian Administrative Building

2019 ◽  
Vol 111 ◽  
pp. 04022
Author(s):  
Calotă Răzvan ◽  
Titi Robert ◽  
Nichita Madalina ◽  
Ilie Anica ◽  
Girip Alina
Keyword(s):  
Comparative Analysis ◽  
Solid Fuel ◽  
Air Conditioning ◽  
Cooling System ◽  
Vapor Compression ◽  
Three Solutions ◽  
Fuel Wood ◽  
Cooling Systems ◽  
Heating And Cooling ◽  
Air Heating

In this paper, the authors determine the energy consumption for heating and air conditioning of an administrative building located in the second climatic area, in Romania. The heating and cooling system is provided with fan coils, and the fresh air is supplied by an AHU. The aim is to identify the best solution from 3 proposed heating and cooling systems that can be applied in order to improve the living conditions, namely: boiler with solid fuel (wood) or gas and chiller with mechanical vapor compression (VCM); reversible heat pump; boiler with solid fuel (wood) or gas and absorption chiller type LiBr-H2O driven by solar energy. The goal of the study is to select one of the three solutions which involves minimum investment and exploitation costs.

Exergy Analysis of a Combined Gas Turbine and Organic Rankine Cycle Based Power and Absorption Cooling Systems

2019 ◽  
Author(s):  
Joy Nondy ◽  
Tapan Kr. Gogoi
Keyword(s):  
Gas Turbine ◽  
Exergy Analysis ◽  
Cooling System ◽  
Organic Rankine Cycle ◽  
Rankine Cycle ◽  
Energy Output ◽  
Steam Turbines ◽  
Cooling Systems ◽  
Economic Point ◽  
Absorption Cooling

Abstract In this paper, a combined power and cooling system is thermodynamically analyzed. The system consists of a natural gas-fired gas turbine (GT) plant integrated with a heat recovery steam generator (HRSG), two steam turbines (STs), one organic Rankine cycle (ORC) and two absorption cooling systems (ACSs). With certain given input parameters, the GT plant produces net power of 36.06 MW, the two STs contribute 17.07 MW while from the ORC, 7.18 MW of net power was obtained. From the steam-operated ACS-I, a net 10.36 MW of cooing could be produced. Again, from the GT exhaust operated ACS-II, it was possible to generate additional 3.37 MW of cooling. From exergy analysis, it was found that the total irreversibility was the highest in the GT cycle with a net contribution of 180.412 MW followed by 4.178 MW from the HRSG, 3.561 MW from the ORC, 1.743 MW from ACS-I, 1.186 MW from ST-I, 0.812 MW from ACS-II, 0.175 MW from ST-II. The exergy efficiencies of the GT cycle, ORC, ACS-I and ACS-II were found 22.00%, 65.48%, 18.95% and 14.4% respectively. Regarding the power and cooling output, it can be concluded that these results are specific to the selected operating parameters. Further investigation is required, where, other similar configurations may be considered to make a final comment on the suitability of the proposed configuration from energy output and economic point of view.

scholarly journals Solar-driven Refrigerator for off-grid Regions

2019 ◽  
Vol 103 ◽  
pp. 01001
Author(s):  
Jakub Kuś ◽  
Kyrylo Rudykh ◽  
Marcin Kobas ◽  
Maciej Żołądek ◽  
Szymon Sendłak ◽  
...  
Keyword(s):  
Cooling System ◽  
Electrical Power ◽  
African Countries ◽  
Cooling Systems ◽  
System A ◽  
Absorption Cooling ◽  
Pv Modules ◽  
Solar Powered ◽  
Conventional Cooling ◽  
Absorption Cooling System

Refrigeration systems are necessary for people living in hot climates. A majority of tropical and subtropical countries uses electrical power as a source of cooling. During the seasons of high ambient temperature there is a significant cooling load due to increased level of energy consumption. Cooling systems are therefore necessary in African countries in order to keep medications and food in safe conditions. Furthermore, there is a power shortage crisis due to the high demand for cooling. TRNSYS software allows to simulate a complete solar-powered absorption cooling system. A model used in an experiment includes PV modules making it advantageous over a conventional cooling system. PV modules of assumed area are sufficient to maintain the temperature inside cooling device below 6°C over the whole year.

Design and Analysis of an Integrated Solar Absorption Cooling and Heating System at Purdue University

2010 ◽  
Author(s):  
Yin Hang ◽  
Ming Qu
Keyword(s):  
System Performance ◽  
Cooling System ◽  
Solar Heating ◽  
Solar Absorption ◽  
Solar Cooling ◽  
Heating And Cooling ◽  
Absorption Cooling ◽  
Testing Stage ◽  
Purdue University ◽  
Solar Absorption Cooling

As one of the most promising solutions to the reduction of fossil fuel consumption and greenhouse gas emissions, the use of solar energy for building space heating and cooling recently has again aroused researcher’s interest with the growing awareness of the global warming and other environmental problems. Compared to the relatively mature solar heating, solar cooling technology remains at the demonstration and testing stage due to its complicated system characteristics, both in concept and construction. Among many solar cooling technologies, solar absorption technology is the most suitable technology for the solar cooling. The major barriers to widespread deployment of the solar absorption cooling are its high first cost, the lack of guidelines of its design and operation, and the relative low system performance due to the lack of the system integration. The paper provides detailed information of an on-going solar heating and cooling research project conducted at Purdue University in West Lafayette, Indiana. The aim of the research is to develop a cost-effective and integrated solar heating and cooling system. The solar thermal system primarily includes a 45kW single effect absorption chiller, evacuated tube solar collectors (ET), and heat storage tanks. The system has been designed based upon scientific principles and engineering fundamentals. It has been analyzed and optimized to achieve the high cost-effectiveness and the high system efficiency through the system performance simulation in Transient Energy System Simulation (TRNSYS) program.

A New Approach to Exergy Analyses of a Hybrid Desiccant Cooling System Compares to a Vapor Compression System

2011 ◽  
Vol 110-116 ◽  
pp. 2163-2169
Author(s):  
S. Khosravi ◽  
Yat Huang Yau ◽  
T.M.I. Mahlia ◽  
M.H. Saidi
Keyword(s):  
Indoor Air ◽  
Cooling System ◽  
Vapor Compression ◽  
Cooling Systems ◽  
New Approach ◽  
Compression System ◽  
Humid Condition ◽  
Economical System ◽  
Vapor Compression System ◽  
Exergy Analyses

In the recent researches HVAC with a based desiccant dehumidifier with a low ambient impact is more efficient in comparison to the traditional systems. Hybrid desiccant cooling systems can be used to control indoor air quality in buildings. This paper presents an integrated energy, entropy and exergy analysis of a hybrid desiccant cooling system compare to a compression system based on first and second laws of thermodynamic. The main objective is the use of a method called exergy costing applied to a conventional compression system that has been chosen to provide the proper conditioned air for a building in hot and humid condition. By applying the same method for the equivalent hybrid cooling system and finding the same exergy costing parameters, two systems can be in comparison to find the more economical system. The result illustrated hybrid desiccant cooling system can be providing 19.78% energy saving and 14.5% cheaper than the compression system the same capacity and lifetime. Nomenclature:

scholarly journals Cost and Performance Goals for Commercial Active Solar Absorption Cooling Systems

1985 ◽  
Vol 107 (2) ◽  
pp. 136-140 ◽  
Author(s):  
M. L. Warren ◽  
M. Wahlig
Keyword(s):  
Performance Analysis ◽  
Solar System ◽  
Thermal Performance ◽  
Return On Investment ◽  
Simulation Analysis ◽  
Cooling System ◽  
Cooling Systems ◽  
System Cost ◽  
Solar Cooling ◽  
Absorption Cooling

Economic and thermal performance analysis is used to determine cost goals for typical commercial active solar cooling systems to be installed between the years 1986 and 2000. Market penetration for heating, ventilating, and air conditioning systems depends on payback period, which is related to the expected return on investment. Postulating a market share for solar cooling systems increasing to 20 percent by the year 2000, payback and return on investment goals as a function of year of purchase are established. The incremental solar system cost goals must be equal to or less than the 20-year percent value of future energy savings, based on thermal performance analysis, at the desired return on investment. The methodology is applied to determine the allowable incremental solar system cost for commercial-scale, 25-ton absorption cooling systems based on the thermal performance predicted by recent simulation analysis, Methods for achieving these cost goals and expected solar cooling system costs will be discussed.

Performance Enhancement of Solar Air Conditioners Using Hybrid Heat Rejection System

2019 ◽  
Author(s):  
Abdul Ahad Iqbal ◽  
Ali Al-Alili
Keyword(s):  
Air Conditioning ◽  
Cooling System ◽  
Vapor Compression ◽  
Summer Period ◽  
Cooling Systems ◽  
Hybrid Cooling ◽  
Vapor Compression Cooling ◽  
Air Conditioning Systems ◽  
Sorption Systems ◽  
Dry Cooling

Abstract The performance of air conditioning systems is highly dependent on the environmental conditions of the high pressure side, where heat is rejected to the environment. Air conditioning systems utilize dry cooling systems which often don’t provide adequate cooling during peak cooling periods, or wet cooling systems which consume a lot of water. In this study, a novel hybrid cooling system that can provide both wet and dry cooling was modelled in TRNSYS, and used to provide cooling to closed sorption air conditioning systems. The performance of these systems with the hybrid cooling system was compared to the performance of a standard vapor compression cooling system being cooled by a dry cooling system. The COPsol of the vapor compression cooling system exhibited a decrease of almost 26% during the summer period, whereas the COPsol of the sorption systems increased by around 30%. Similarly, the cooling capacity of the vapor compression cooling system dropped by almost 5%, and for the sorption systems, it increased by around 20% during the summer period.

Evaluation of the cooling potential for a single effect absorption cooling system in the PR2 well of Cerritos Colorados geothermal field, Mexico

2020 ◽  
Vol 38 (6) ◽  
pp. 2521-2540
Author(s):  
Juliana Isabel Saucedo Velázquez ◽  
Wilfrido Rivera Gómez Franco ◽  
Efraín Gómez-Arias ◽  
Geydy Gutiérrez Urueta
Keyword(s):  
Cooling System ◽  
Geothermal Field ◽  
Cooling Systems ◽  
Absorption Cooling ◽  
Different Depths ◽  
Single Effect ◽  
Typical Day ◽  
Conventional Cooling ◽  
Conventional Systems ◽  
Absorption Cooling System

Conventional cooling systems consume a high percentage of the world’s total electricity generation. Because absorption cooling systems can be mainly operated with thermal energy, they can be used to reduce such percentage. In the present paper, an analysis is carried out to determine the cooling potential that can be obtained from a geothermal well in a location of Mexico by using a single-stage absorption cooling system. The analysis has been carried out taking into account the desired cooling temperature, the ambient temperature, and the temperatures at different depths of the wells for a typical day of every season of the year. The results showed that, for a fixed generation temperature, a maximum cooling potential as big as 71,594 GW, 70,649 GW, 71,164 GW, 70,859 GW could be obtained in Winter, Spring, Summer, and Autumn, respectively. Using the temperatures obtained from the well, for a fixed depth, the results show that higher values are obtained in spring and summer. From the analysis, it is clear that absorption systems operating with geothermal energy could be an excellent alternative to reduce the electricity consumed by conventional systems.

Sign in / Sign up

Export Citation Format

Share Document