Stall Inception and Development in an Axial Flow Aeroengine

1994 ◽  
Vol 116 (2) ◽  
pp. 216-225 ◽  
Author(s):  
A. G. Wilson ◽  
C. Freeman
Keyword(s):  
High Speed ◽  
Engine Speed ◽  
Static Pressure ◽  
Flow Instability ◽  
Axial Flow ◽  
Fast Response ◽  
Rotating Stall ◽  
Flow Disturbance ◽  
Stall Inception ◽  
Small Flow

This paper describes the phenomenon of stall and surge in an axial flow aeroengine using fast response static pressure measurements from the compressor of a Rolls-Royce VIPER engine. It details the growth of flow instability at various speeds, from a small zone of stalled fluid involving only a few blades into the violent surge motion of the entire machine. Various observations from earlier theoretical and compressor rig results are confirmed by these new engine measurements. The main findings are as follows: (1) The point of stall inception moves rearward as engine speed increases, and is shown to be simply related to the axial matching of the compressor. (2) The final unstable operation of the machine can be divided into rotating stall at low speed and surge or multiple surge at high speed. (3) The inception process is independent of whether the final unstable operation is rotating stall or multiple surge. (4) Stall/surge always starts as a circumferentially small flow disturbance, rotating around the annulus at some fraction of rotor speed.

scholarly journals Stall Inception and Development in an Axial Flow Aeroengine

1993 ◽  
Author(s):  
Alexander G. Wilson ◽  
Chris Freeman
Keyword(s):  
High Speed ◽  
Engine Speed ◽  
Static Pressure ◽  
Flow Instability ◽  
Axial Flow ◽  
Fast Response ◽  
Rotating Stall ◽  
Flow Disturbance ◽  
Stall Inception ◽  
Small Flow

This paper describes the phenomenon of stall and surge in an axial flow aeroengine using fast response static pressure measurements from the compressor of a Rolls-Royce VIPER engine. It details the growth of flow instability at various speeds, from a small zone of stalled fluid involving only a few blades into the violent surge motion of the entire machine. Various observations from earlier theoretical and compressor rig results are confirmed by these new engine measurements. The main findings are as follows: 1. The point of stall inception moves rearwards as engine speed increases, and is shown to be simply related to the axial matching of the compressor. 2. The final unstable operation of the machine can be divided into rotating stall at low speed and surge or multiple surge at high speed. 3. The inception process is independent of whether the final unstable operation is rotating stall or multiple surge. 4. Stall/surge always starts as a circumferentially small flow disturbance, rotating around the annulus at some fraction of rotor speed.

Stall Inception in a High Speed Centrifugal Compressor During Speed Transients

2017 ◽  
Author(s):  
Fangyuan Lou ◽  
John C. Fabian ◽  
Nicole L. Key
Keyword(s):  
Heat Transfer ◽  
Centrifugal Compressor ◽  
High Speed ◽  
Flow Instability ◽  
Leading Edge ◽  
Fast Response ◽  
Rotating Stall ◽  
Transient Performance ◽  
Stall Inception ◽  
Pressure Transducers

The inception and evolution of rotating stall in a high-speed centrifugal compressor are characterized during speed transients. Experiments were performed in the Single Stage Centrifugal Compressor (SSCC) facility at Purdue University and include speed transients from sub-idle to full speed at different throttle settings while collecting transient performance data. Results show a substantial difference in the compressor transient performance for accelerations versus decelerations. This difference is associated with the heat transfer between the flow and the hardware. The heat transfer from the hardware to the flow during the decelerations locates the compressor operating condition closer to the surge line and results in a significant reduction in surge margin during decelerations. Additionally, data were acquired from fast-response pressure transducers along the impeller shroud, in the vaneless space, and along the diffuser passages. Two different patterns of flow instabilities, including mild surge and short-length-scale rotating stall, are observed during the decelerations. The instability starts with a small pressure perturbation at the impeller leading edge and quickly develops into a single-lobe rotating stall burst. The stall cell propagates in the direction opposite of impeller rotation at approximately one third of the rotor speed. The rotating stall bursts are observed in both the impeller and diffuser, with the largest magnitudes near the diffuser throat. Furthermore, the flow instability develops into a continuous high frequency stall and remains in the fully developed stall condition.

Stall Inception in a High-Speed Centrifugal Compressor During Speed Transients

2017 ◽  
Vol 139 (12) ◽  
Author(s):  
Fangyuan Lou ◽  
John C. Fabian ◽  
Nicole L. Key
Keyword(s):  
Heat Transfer ◽  
Centrifugal Compressor ◽  
High Speed ◽  
Flow Instability ◽  
Leading Edge ◽  
Fast Response ◽  
Rotating Stall ◽  
Transient Performance ◽  
Stall Inception ◽  
Pressure Transducers

The inception and evolution of rotating stall in a high-speed centrifugal compressor are characterized during speed transients. Experiments were performed in the single stage centrifugal compressor (SSCC) facility at Purdue University and include speed transients from subidle to full speed at different throttle settings while collecting transient performance data. Results show a substantial difference in the compressor transient performance for accelerations versus decelerations. This difference is associated with the heat transfer between the flow and the hardware. The heat transfer from the hardware to the flow during the decelerations locates the compressor operating condition closer to the surge line and results in a significant reduction in surge margin during decelerations. Additionally, data were acquired from fast-response pressure transducers along the impeller shroud, in the vaneless space, and along the diffuser passages. Two different patterns of flow instabilities, including mild surge and short-length-scale rotating stall, are observed during the decelerations. The instability starts with a small pressure perturbation at the impeller leading edge (LE) and quickly develops into a single-lobe rotating stall burst. The stall cell propagates in the direction opposite of impeller rotation at approximately one-third of the rotor speed. The rotating stall bursts are observed in both the impeller and diffuser, with the largest magnitudes near the diffuser throat. Furthermore, the flow instability develops into a continuous high frequency stall and remains in the fully developed stall condition.

Experimental Investigation of Rotating Stall in a Mismatched Three-Stage Axial Flow Compressor

1989 ◽  
Vol 111 (4) ◽  
pp. 418-425 ◽  
Author(s):  
G. L. Giannissis ◽  
A. B. McKenzie ◽  
R. L. Elder
Keyword(s):  
High Speed ◽  
Measurement Techniques ◽  
Axial Flow ◽  
Fast Response ◽  
Rotating Stall ◽  
Response Measurement ◽  
Stall Inception ◽  
Axial Flow Compressor ◽  
Multistage Compressors ◽  
Flow Compressor

This paper reports on an examination of rotating stall in a low-speed three-stage axial flow compressor operating with various degrees of stage mismatch. The objective of this study was to simulate the mismatching that occurs in high-speed multistage compressors when operating near surge. The study of the stall zones involved the use of fast response measurement techniques. The study clearly shows how stages can operate in an axisymmetric fashion even when heavily stalled, since rotating stall inception requires the stall of more than one stage. The study also compares conditions required for full-span and part-span stall and suggests that the part-span stall structure is more relevant to high-speed multistage compressors.

scholarly journals Stall Inception in a High-Speed Low Aspect Ratio Fan Including the Effects of Casing Treatments

1994 ◽  
Author(s):  
S. E. Gorrell ◽  
P. M. Russler
Keyword(s):  
Aspect Ratio ◽  
High Speed ◽  
Static Pressure ◽  
Pressure Ratio ◽  
Rotating Stall ◽  
Operating Conditions ◽  
Stall Inception ◽  
Casing Treatment ◽  
Low Aspect Ratio ◽  
Casing Treatments

The stall inception process in high-speed compressor components is important to understand in order to increase stage loading while maintaining stall margin. This paper presents the results of an in depth experimental investigation on the stall inception of a two stage, high-speed, low aspect ratio fan that is representative of current operational commercial and military fan technology. High-response static pressure measurements are presented which detail the stall inception process of the fan under various operating conditions. These conditions include: varied corrected speeds, a smooth case, a circumferential groove casing treatment, and a recirculating cavity casing treatment. Stage pressure characteristics and radial pressure ratio profiles are presented for the different operating conditions. The stage performance data, together with the static pressure data, are analyzed to provide a clear and thorough understanding of the stall inception process and how the process may vary under different conditions. Experimental results show that a stage may stall on the positive, neutral, or negative sloped part of the pressure characteristic. The three casing treatments had a significant effect on the rotor tip flow and these variations changed the stall inception path of the fan. Stall inception was characterized by the formation of a stall inception cell which grew to fully developed rotating stall. Properties affected by the changing tip flow include the stall inception duration, stall inception cell frequency, existence of modal waves, duration of modal waves, and modal wave frequency. In some instances modal waves appear to play a role in stall inception, in others they do not.

Fan Stability With Leading Edge Damage: Blind Prediction and Validation

2021 ◽  
Author(s):  
E. J. Gunn ◽  
T. Brandvik ◽  
M. J. Wilson ◽  
R. Maxwell
Keyword(s):  
Supersonic Flow ◽  
High Speed ◽  
Leading Edge ◽  
Rotating Stall ◽  
Stall Inception ◽  
Blind Prediction ◽  
Edge Damage ◽  
The Impact ◽  
Operating Points ◽  
Relative Flow

Abstract This paper considers the impact of a damaged leading edge on the stall margin and stall inception mechanisms of a transonic, low pressure ratio fan. The damage takes the form of a squared-off leading edge over the upper half of the blade. Full-annulus, unsteady CFD simulations are used to explain the stall inception mechanisms for the fan at low- and high-speed operating points. A combination of steady and unsteady simulations show that the fan is predicted to be sensitive to leading edge damage at low speed, but insensitive at high speed. This blind prediction aligns well with rig test data. The difference in response is shown to be caused by the change between subsonic and supersonic flow regimes at the leading edge. Where the inlet relative flow is subsonic, rotating stall is initiated by growth and propagation of a subsonic leading edge flow separation. This separation is shown to be triggered at higher mass flow rates when the leading edge is damaged, reducing the stable flow range. Where the inlet relative flow is supersonic, the flow undergoes a supersonic expansion around the leading edge, creating a supersonic flow patch terminated by a shock on the suction surface. Rotating stall is triggered by growth of this separation, which is insensitive to leading edge shape. This creates a marked difference in sensitivity to damage at low- and high-speed operating points.

1118 Effect of Tip Clearance on Rotating Stall Inception in an Axial Flow Compressor Rotor

2009 ◽  
Vol 2009 (0) ◽  
pp. 377-378 ◽  
Author(s):  
Hiroaki KIKUTA ◽  
Masato FURUKAWA ◽  
Satoshi GUNJISHIMA ◽  
Kenichiro IWAKIRI ◽  
Takuro KAMEDA
Keyword(s):  
Axial Flow ◽  
Rotating Stall ◽  
Tip Clearance ◽  
Stall Inception ◽  
Axial Flow Compressor ◽  
Compressor Rotor ◽  
Flow Compressor

Rotating Stall Observations in a High Speed Compressor—Part II: Numerical Study

2015 ◽  
Vol 137 (5) ◽  
Author(s):  
J. Dodds ◽  
M. Vahdati
Keyword(s):  
High Speed ◽  
Numerical Study ◽  
Axial Flow ◽  
Leading Edge ◽  
Rotating Stall ◽  
Tip Clearance ◽  
Tip Clearance Flow ◽  
Numerical Predictions ◽  
Stage 1 ◽  
Variable Stator

In this two-part paper the phenomenon of part span rotating stall is studied. The objective is to improve understanding of the physics by which stable and persistent rotating stall occurs within high speed axial flow compressors. This phenomenon is studied both experimentally (Part I) and numerically (Part II). The experimental observations reported in Part I are now explored through the use of 3D unsteady Reynolds-averaged Navier–Stokes (RANS) simulation. The objective is to both validate the computational model and, where possible, explore some physical aspects of the phenomena. Unsteady simulations are presented, performed at a fixed speed with the three rows of variable stator vanes adjusted to deliberately mismatch the front stages and provoke stall. Two families of rotating stall are identified by the model, consistent with experimental observations from Part I. The first family of rotating stall originates from hub corner separations developing on the stage 1 stator vanes. These gradually coalesce into a multicell rotating stall pattern confined to the hub region of the stator and its downstream rotor. The second family originates from regions of blockage associated with tip clearance flow over the stage 1 rotor blade. These also coalesce into a multicell rotating stall pattern of shorter length scale confined to the leading edge tip region. Some features of each of these two patterns are then explored as the variable stator vanes (VSVs) are mismatched further, pushing each region deeper into stall. The numerical predictions show a credible match with the experimental findings of Part I. This suggests that a RANS modeling approach is sufficient to capture some important aspects of part span rotating stall behavior.

Rotating Waves as a Stall inception Indication in Axial Compressors

1991 ◽  
Vol 113 (2) ◽  
pp. 290-301 ◽  
Author(s):  
V. H. Garnier ◽  
A. H. Epstein ◽  
E. M. Greitzer
Keyword(s):  
Growth Rate ◽  
Small Amplitude ◽  
High Speed ◽  
Rotating Stall ◽  
Analytical Models ◽  
Stall Inception ◽  
Axial Compressors ◽  
Spatially Resolved ◽  
Two Stages ◽  
The Waves

Stall inception has been studied in two low-speed compressors (a single-stage and a three-stage) and in a high-speed three-stage compressor, using temporally and spatially resolved measurements. In all three machines, rotating stall was preceded by a period in which small-amplitude waves were observed traveling around the circumference of the machine at a speed slightly less than the fully developed rotating stall cell speed. The waves evolved smoothly into rotating stall without sharp changes in phase or amplitude, implying that, in the machines tested, the prestall waves and the fully developed rotating stall are two stages of the same phenomenon. The growth rate of these disturbances was in accord with that predicted by current analytical models. The prestall waves were observed both with uniform and with distorted inflow, but were most readily discerned with uniform inflow. Engineering uses and limitations of these waves are discussed.

J0501-2-2 Effect of Stator on Rotating Stall Inception in Axial Flow Compressor Rotor

2010 ◽  
Vol 2010.7 (0) ◽  
pp. 15-16
Author(s):  
Hiroaki KIKUTA ◽  
Masato FURUKAWA ◽  
Kenichiro IWAKIRI ◽  
Satoshi GUNJISHIMA ◽  
Goki OKADA ◽  
...  
Keyword(s):  
Axial Flow ◽  
Rotating Stall ◽  
Stall Inception ◽  
Axial Flow Compressor ◽  
Compressor Rotor ◽  
Flow Compressor
Sign in / Sign up

Export Citation Format

Share Document