The Lift Force on a Cylinder Vibrating in a Current

1990 ◽  
Vol 112 (4) ◽  
pp. 297-303 ◽  
Author(s):  
G. Moe ◽  
Z.-J. Wu
Keyword(s):  
Free Vibration ◽  
Forced Vibration ◽  
Cross Flow ◽  
Reference Frequency ◽  
Average Force ◽  
Vibrational Response ◽  
Uniform Current ◽  
Extensive Program ◽  
Vibration Tests ◽  
Lock In

This paper reports an extensive program of forced and free vibration tests on a single circular cylinder moving mainly perpendicularly to a uniform current. For both free and forced vibration tests, two cases were investigated: one in which the cylinder was restrained in the in-line direction and the other in which it was supported on suitable springs. The cross-flow vibrational response and hydrodynamic forces on the cylinder were measured. Large variations of motion frequency in the “lock-in” range were found from the free vibration tests. This leads to two different definitions of reduced velocity, namely, a so-called nominal reduced velocity based on one reference frequency and the true reduced velocity based on the actual vibration frequency. When different results are compared, the true reduced velocity should be used. The forced vibration tests showed, as may be expected, that the transverse force in the “lock-in” range on the average will add energy to the cylinder at moderate motion amplitudes and subtract energy at large amplitudes. Some conditions resulting in a steady-state vibration of a flexibly mounted cylinder were analyzed. The actual force traces also show very large and apparently random deviations from the average force amplitude. The results from the forced and the free vibration tests are consistent with each other if the true reduced velocity and reduced amplitude are the same.

Forced Vibration Tests for In-Line Vortex-Induced Vibration to Assess Partially Strake-Covered Pipeline Spans

2020 ◽  
Vol 143 (3) ◽  
Author(s):  
Jie Wu ◽  
Decao Yin ◽  
Elizabeth Passano ◽  
Halvor Lie ◽  
Ralf Peek ◽  
...  
Keyword(s):  
Forced Vibration ◽  
Hydrodynamic Force ◽  
Cross Flow ◽  
Added Mass ◽  
Vortex Induced Vibrations ◽  
Helical Strakes ◽  
Vibration Tests ◽  
Flow Vortex ◽  
Hydrodynamic Data ◽  
Mass Functions

Abstract Helical strakes can suppress vortex-induced vibrations (VIVs) in pipelines spans and risers. Pure in-line (IL) VIV is more of a concern for pipelines than for risers. To make it possible to assess the effectiveness of partial strake coverage for this case, an important gap in the hydrodynamic data for strakes is filled by the reported IL forced-vibration tests. Therein, a strake-covered rigid cylinder undergoes harmonic purely IL motion while subject to a uniform “flow” created by towing the test rig along SINTEF Ocean's towing tank. These tests cover a range of frequencies, and amplitudes of the harmonic motion to generate added-mass and excitation functions are derived from the in-phase and 90 deg out-of-phase components of the hydrodynamic force on the pipe, respectively. Using these excitation- and added-mass functions in VIVANA together with those from experiments on bare pipe by Aronsen (2007 “An Experimental Investigation of In-Line and Combined In-Line and Cross-Flow Vortex Induced Vibrations,” Ph.D. thesis, Norwegian University of Science and Technology, Trondheim, Norway.), the IL VIV response of partially strake-covered pipeline spans is calculated. It is found that as little as 10% strake coverage at the optimal location effectively suppresses pure IL VIV.

scholarly journals Implementation of Shape Memory Alloy Sponge as Energy Dissipating Material on Pounding Tuned Mass Damper: An Experimental Investigation

2019 ◽  
Vol 9 (6) ◽  
pp. 1079 ◽  
Author(s):  
Jie Tan ◽  
Jinwei Jiang ◽  
Min Liu ◽  
Qian Feng ◽  
Peng Zhang ◽  
...  
Keyword(s):  
Shape Memory Alloy ◽  
Free Vibration ◽  
Forced Vibration ◽  
Tuned Mass Damper ◽  
Spring Steel ◽  
Piping System ◽  
Damping Material ◽  
Mass Damper ◽  
Piping Systems ◽  
Vibration Tests

Piping systems are important nonstructural components of most types of buildings. Damage to piping systems can lead to significant economic losses, casualties, and interruption of function. A survey of earthquake disaster sites shows that suspended piping systems are flexible and thus prone to large deformation, which can lead to serious damage of the piping systems. The single-sided pounding tuned mass damper (PTMD), which is an emerging vibration suppression tool, has the potential to serve as a cost effective and non-invasive solution for the mitigation of vibration in suspended piping systems. The operating frequency of the single-sided PTMD can be tuned similarly to a tuned mass damper (TMD). The single-side PTMD also possesses high energy dissipation characteristics and has demonstrated outstanding performance in vibration control. One of the key factors affecting the performance of the PTMD is the damping material, and there is a constant search for the ideal type of material that can increase the performance of the PTMD. This paper explores the use of shape memory alloy (SMA) sponge as the damping material for two types (spring steel and pendulum types) of PTMDs to mitigate the vibration of a suspended piping system. The PTMDs are tested both in free vibration and in forced vibration. The results are compared with no control, with a TMD control, and with a viscoelastic (VE) material PTMD control. The results show that in free vibration tests, SMA–PTMDs attenuate the displacement of the piping system significantly. The time to mitigate vibration (i.e., reduce 90% of the vibration amplitude) is reduced to 6% (for spring steel type) and 11% (for pendulum type) of the time taken to mitigate vibration without control. In forced vibration tests, the overall magnitudes of the frequency response are also lowered to 38% (spring steel) and 44% (pendulum) compared to vibration without control. The results indicate that SMA has the potential to be a promising energy dissipating material for PTMDs.

Modal parameter identification of a long-span footbridge by forced vibration experiments

2017 ◽  
Vol 20 (5) ◽  
pp. 661-673 ◽  
Author(s):  
Q Wen ◽  
XG Hua ◽  
ZQ Chen ◽  
JM Guo ◽  
HW Niu
Keyword(s):  
Free Vibration ◽  
Frequency Response ◽  
Forced Vibration ◽  
Ambient Vibration ◽  
Modal Parameters ◽  
Response Functions ◽  
Modal Parameter ◽  
Modal Parameter Identification ◽  
Cable Stayed Bridge ◽  
Vibration Tests

Performing forced vibration tests on full-scale structures is the most reliable way of determining the relevant modal parameters in structural dynamics, such as modal frequencies, mode shapes, modal damping, and modal masses. This study describes the modal identification of a double-level curved cable-stayed bridge with separate deck systems for pedestrians and vehicles via forced vibration tests. The steady-state structural responses to sinusoidal excitations produced by an electrodynamic shaker are recorded under varying excitation frequencies, and the frequency response functions are established. The measured frequency response functions are curve fitted to estimate the modal parameters. The numerical simulation of frequency response function–based modal parameter identification of an elastically multi-supported continuous beam structure is carried out, and the emphasis has been placed on the evaluation of the effect of an additional shaker mass, excitation frequency step and range, multi-mode vibration, and noise on identification results. Finally, the modal parameters for the first lateral mode of a double-level curved cable-stayed bridge are identified by forced vibration experiments, and the results are compared with those from ambient vibration tests and free vibration tests. The effect of the unmeasured wind excitation on identification is discussed. It is shown that the effect of ambient vibration is minor for wind velocity of 3–5 m/s. The damping ratios identified by forced and free vibration tests are comparable, while those from ambient vibration are subject to large variations. The modal mass obtained from forced vibration tests is in good agreement with finite element prediction, which provides design basis for mass-type dampers.

scholarly journals In-Line VIV Based on Forced-Vibration Tests

2019 ◽  
Author(s):  
Decao Yin ◽  
Jie Wu ◽  
Elizabeth Passano ◽  
Halvor Lie ◽  
Ralf Peek ◽  
...  
Keyword(s):  
Response Function ◽  
Forced Vibration ◽  
Cross Flow ◽  
Companion Paper ◽  
Travelling Wave ◽  
Function Approach ◽  
Flexible Pipe ◽  
Wave Effects ◽  
Vibration Tests ◽  
Semi Empirical

Abstract Excitation and added mass functions determined from forced vibration tests of a rigid cylinder undergoing harmonic motion in the flow are used in the semi-empirical software VIVANA to predict the VIV response of pipelines. An advantage of this approach, as opposed to the more-commonly-used response function approach, is that it can account for changing conditions along the length of the pipe, like changing current velocity, seabed proximity, and/or pipe diameter. This makes it useful for pipelines as well as for risers when such changes occur. Further, for pipelines, travelling wave effects play less of a role than for risers, so the VIVANA approach can be simplified by assuming the phase angle of the harmonic response is constant along the span. The interactions between cross-flow and in-line response that complicate the prediction of cross-flow VIV by the excitation function approach, do not arise for pure inline VIV. For the latter case, using the pure in-line forced vibration test data of Aronsen (2007), it is found that both VIVANA approach and simplified ‘SIVANA’ approach thereof predict VIV amplitudes consistent with experiments on flexible pipe (Ormen Lange umbilical VIV tests), and the DNVGL-RP-F105 response function for a range of structural and soil damping values. In a companion paper, this approach is applied partially strake-covered pipeline spans, to show that a relatively small fraction of well-placed strake coverage is enough to suppress in-line VIV.

scholarly journals Effects of Precast Cladding Systems on Dynamic Characteristics of Steel Frame Buildings by Ambient and Free Vibration Tests

2017 ◽  
Vol 2017 ◽  
pp. 1-20 ◽  
Author(s):  
Jun Ma ◽  
Shinji Nakata ◽  
Akihito Yoshida ◽  
Yukio Tamura
Keyword(s):  
Free Vibration ◽  
Dynamic Characteristics ◽  
Steel Frame ◽  
Ambient Vibration ◽  
Test Cases ◽  
Vibration Method ◽  
External Wall ◽  
Wide Range ◽  
Cladding Panels ◽  
Vibration Tests

Full-scale tests on a one-story steel frame structure with a typical precast cladding system using ambient and free vibration methods are described in detail. The cladding system is primarily composed of ALC (Autoclaved Lightweight Concrete) external wall cladding panels, gypsum plasterboard interior linings, and window glazing systems. Ten test cases including the bare steel frame and the steel frame with addition of different parts of the precast cladding system are prepared for detailed investigations. The amplitude-dependent dynamic characteristics of the test cases including natural frequencies and damping ratios determined from the tests are presented. The effects of the ALC external wall cladding panels, the gypsum plasterboard interior linings, and the window glazing systems on the stiffness and structural damping of the steel frame are discussed in detail. The effect of the precast cladding systems on the amplitude dependency of the dynamic characteristics and the tendencies of the dynamic parameters with respect to the structural response amplitude are investigated over a wide range. Furthermore, results estimated from the ambient vibration method are compared with those from the free vibration tests to evaluate the feasibility of the ambient vibration method.

Characterization of hydrodynamic properties from free vibration tests of a large-scale bridge model

2021 ◽  
Vol 106 ◽  
pp. 103368
Author(s):  
Thomas Schumacher ◽  
Alaa W. Hameed ◽  
Christopher Higgins ◽  
Brittany Erickson
Keyword(s):  
Free Vibration ◽  
Large Scale ◽  
Hydrodynamic Properties ◽  
Bridge Model ◽  
Vibration Tests

scholarly journals Fluid-Structure Energy Transfer of a Tensioned Beam Subject to Vortex-Induced Vibrations in Shear Flow

2011 ◽  
Author(s):  
Remi Bourguet ◽  
Michael S. Triantafyllou ◽  
Michael Tognarelli ◽  
Pierre Beynet
Keyword(s):  
Energy Transfer ◽  
Shear Flow ◽  
Cross Flow ◽  
Reynolds Numbers ◽  
Structural Vibrations ◽  
Fluid Structure ◽  
Vortex Induced Vibrations ◽  
Linear Shear ◽  
Structural Responses ◽  
Lock In

The fluid-structure energy transfer of a tensioned beam of length to diameter ratio 200, subject to vortex-induced vibrations in linear shear flow, is investigated by means of direct numerical simulation at three Reynolds numbers, from 110 to 1,100. In both the in-line and cross-flow directions, the high-wavenumber structural responses are characterized by mixed standing-traveling wave patterns. The spanwise zones where the flow provides energy to excite the structural vibrations are located mainly within the region of high current where the lock-in condition is established, i.e. where vortex shedding and cross-flow vibration frequencies coincide. However, the energy input is not uniform across the entire lock-in region. This can be related to observed changes from counterclockwise to clockwise structural orbits. The energy transfer is also impacted by the possible occurrence of multi-frequency vibrations.

FORCED VIBRATION TESTS AND THEORETICAL STUDIES ON DAMS.

1980 ◽  
Vol 69 (3) ◽  
pp. 605-634 ◽  
Author(s):  
RT SEVERN ◽  
AP JEARY ◽  
BR ELLIS ◽  
Keyword(s):  
Forced Vibration ◽  
Theoretical Studies ◽  
Vibration Tests

scholarly journals Vortex-induced vibrations of a long flexible cylinder in shear flow

2011 ◽  
Vol 677 ◽  
pp. 342-382 ◽  
Author(s):  
REMI BOURGUET ◽  
GEORGE E. KARNIADAKIS ◽  
MICHAEL S. TRIANTAFYLLOU
Keyword(s):  
Shear Flow ◽  
Vortex Shedding ◽  
Cross Flow ◽  
Maximum Velocity ◽  
Travelling Wave ◽  
Transition To Turbulence ◽  
Wave Component ◽  
Flexible Cylinder ◽  
Vortex Induced Vibrations ◽  
Lock In

We investigate the in-line and cross-flow vortex-induced vibrations of a long cylindrical tensioned beam, with length to diameter ratio L/D = 200, placed within a linearly sheared oncoming flow, using three-dimensional direct numerical simulation. The study is conducted at three Reynolds numbers, from 110 to 1100 based on maximum velocity, so as to include the transition to turbulence in the wake. The selected tension and bending stiffness lead to high-wavenumber vibrations, similar to those encountered in long ocean structures. The resulting vortex-induced vibrations consist of a mixture of standing and travelling wave patterns in both the in-line and cross-flow directions; the travelling wave component is preferentially oriented from high to low velocity regions. The in-line and cross-flow vibrations have a frequency ratio approximately equal to 2. Lock-in, the phenomenon of self-excited vibrations accompanied by synchronization between the vortex shedding and cross-flow vibration frequencies, occurs in the high-velocity region, extending across 30% or more of the beam length. The occurrence of lock-in disrupts the spanwise regularity of the cellular patterns observed in the wake of stationary cylinders in shear flow. The wake exhibits an oblique vortex shedding pattern, inclined in the direction of the travelling wave component of the cylinder vibrations. Vortex splittings occur between spanwise cells of constant vortex shedding frequency. The flow excites the cylinder under the lock-in condition with a preferential in-line versus cross-flow motion phase difference corresponding to counter-clockwise, figure-eight orbits; but it damps cylinder vibrations in the non-lock-in region. Both mono-frequency and multi-frequency responses may be excited. In the case of multi-frequency response and within the lock-in region, the wake can lock in to different frequencies at various spanwise locations; however, lock-in is a locally mono-frequency event, and hence the flow supplies energy to the structure mainly at the local lock-in frequency.

Forced-Vibration Tests of the Daniel-Johnson Multiple-Arch Dam

2017 ◽  
pp. 397-408
Author(s):  
O. Gauron ◽  
Y. Boivin ◽  
S. Ambroise ◽  
P. Paultre ◽  
J. Proulx ◽  
...  
Keyword(s):  
Forced Vibration ◽  
Arch Dam ◽  
Vibration Tests
Sign in / Sign up

Export Citation Format

Share Document