Three-Dimensional Natural Convection in a Vertical Porous Layer With a Hexagonal Honeycomb Core

1992 ◽  
Vol 114 (4) ◽  
pp. 924-927 ◽  
Author(s):  
Y. Asako ◽  
H. Nakamura ◽  
Y. Yamaguchi ◽  
M. Faghri
Keyword(s):  
Heat Transfer ◽  
Natural Convection ◽  
Boundary Conditions ◽  
Porous Layer ◽  
Numerical Solutions ◽  
Transfer Problem ◽  
Three Dimensional ◽  
Temperature Fields ◽  
Honeycomb Core ◽  
Thermal Boundary Conditions

Numerical solutions are obtained for a three-dimensional natural convection heat transfer problem in a vertical porous layer with a hexagonal honeycomb core. The porous layer is assumed to be long and wide such that the velocity and temperature fields repeat themselves in successive enclosures. The natural convection problem is solved for only one honeycomb enclosure with periodic thermal boundary conditions. The porous layer is assumed to be homogeneous and isotropic and the flow is obtained by using the Darcian model. The numerical methodology is based on an algebraic coordinate transformation technique, which maps the hexagonal cross section onto a rectangle. The transformed governing equations are solved with the SIMPLE algorithm. The calculations are performed for the Darcy–Rayleigh number in the range of 10 to 103 and for eight values of the aspect ratio (H/L = 0.25, 0.333, 0.5, 0.7, 1, 1.4, 2, and 5). Two types of thermal boundary condition for the honeycomb core wall are considered: conduction and adiabatic honeycomb core wall thermal boundary conditions. The results are presented in the form of average and local heat transfer coefficients and are compared with the corresponding values for two and three-dimensional rectangular enclosures.

Three-Dimensional Laminar Natural Convection in a Vertical Air Slot With Hexagonal Honeycomb Core

1990 ◽  
Vol 112 (1) ◽  
pp. 130-136 ◽  
Author(s):  
Y. Asako ◽  
H. Nakamura ◽  
M. Faghri
Keyword(s):  
Natural Convection ◽  
Numerical Solutions ◽  
Transfer Problem ◽  
Three Dimensional ◽  
Convection Heat Transfer ◽  
Side Wall ◽  
Temperature Fields ◽  
Honeycomb Core ◽  
Wall Boundary Conditions ◽  
Laminar Natural Convection

Numerical solutions are obtained for a three-dimensional natural convection heat transfer problem in a vertical air slot with a thin hexagonal honeycomb core. The air slot is assumed to be of such dimensions that the velocity and temperature fields repeat themselves in successive enclosures. The numerical methodology is based on an algebraic coordinate transformation technique, which maps the complex cross section onto a rectangle, coupled with a calculation procedure for fully elliptic three-dimensional flows. The calculations are performed for the Rayleigh number in the range of 103 to 105, for a Prandtl number of 0.7, and for five values of the aspect ratio of the honeycomb enclosure. The average Nusselt number results for the case of a thin honeycomb core are compared with the previously obtained results for a thick honeycomb core with conduction and adiabatic side wall boundary conditions.

Three-Dimensional Laminar Natural Convection in an Inclined Air Slot With Hexagonal Honeycomb Core

1991 ◽  
Vol 113 (4) ◽  
pp. 906-911 ◽  
Author(s):  
Y. Asako ◽  
H. Nakamura ◽  
Z. Chen ◽  
M. Faghri
Keyword(s):  
Natural Convection ◽  
Numerical Solutions ◽  
Transfer Problem ◽  
Three Dimensional ◽  
Convection Heat Transfer ◽  
Temperature Fields ◽  
Honeycomb Core ◽  
Inclination Angles ◽  
Side Walls ◽  
Rayleigh Numbers

Numerical solutions are obtained for a three-dimensional natural convection heat transfer problem in an inclined air slot with a hexagonal honeycomb core. The air slot is assumed to be long and wide such that the velocity and temperature fields repeat themselves in successive enclosures. The numerical methodology is based on an algebraic coordinate transformation technique, which maps the complex cross section onto a rectangle, coupled with a calculation procedure for fully elliptic three-dimensional flows. The calculations are performed for Rayleigh numbers in the range of 103 to 105, inclination angles in the range of −90 to 80 deg, Prandtl number of 0.7, and for five values of the aspect ratio. Three types of thermal boundary condition for the honeycomb side walls are considered. The average Nusselt number results are compared with those for a rectangular two-dimensional enclosure.

Three-Dimensional Natural Convection From Vertical Heated Plates With Adjoining Cool Surfaces

1992 ◽  
Vol 114 (1) ◽  
pp. 115-120 ◽  
Author(s):  
B. W. Webb ◽  
T. L. Bergman
Keyword(s):  
Heat Transfer ◽  
Natural Convection ◽  
Control Volume ◽  
Three Dimensional ◽  
Local Heat Transfer ◽  
Local Heat ◽  
Uniform Heat Flux ◽  
Infrared Thermal Imaging ◽  
Transfer Rates ◽  
Thermal Boundary Conditions

Natural convection in an enclosure with a uniform heat flux on two vertical surfaces and constant temperature at the adjoining walls has been investigated both experimentally and theoretically. The thermal boundary conditions and enclosure geometry render the buoyancy-induced flow and heat transfer inherently three dimensional. The experimental measurements include temperature distributions of the isoflux walls obtained using an infrared thermal imaging technique, while the three-dimensional equations governing conservation of mass, momentum, and energy were solved using a control volume-based finite difference scheme. Measurements and predictions are in good agreement and the model predictions reveal strongly three-dimensional flow in the enclosure, as well as high local heat transfer rates at the edges of the isoflux wall. Predicted average heat transfer rates were correlated over a range of the relevant dimensionless parameters.

Effects of Thermal Boundary Conditions on Entropy Generation During Natural Convection in a Differentially Heated Square Cavity

2010 ◽  
Author(s):  
Ram Satish Kaluri ◽  
Tanmay Basak ◽  
A. R. Balakrishnan
Keyword(s):  
Heat Transfer ◽  
Natural Convection ◽  
Boundary Conditions ◽  
Entropy Generation ◽  
Bottom Wall ◽  
Convection Flow ◽  
Uniform Heating ◽  
Square Cavity ◽  
Fluid Friction ◽  
Thermal Boundary Conditions

Natural convection is a widely occurring phenomena which has important applications in material processing, energy storage devices, electronic cooling, building ventilation etc. The concept of ‘entropy generation minimization’, which is a thermodynamic approach for optimization, may be very useful in designing efficient thermal systems. In the current study, entropy generation in steady laminar natural convection flow in a square cavity is studied with following isothermal boundary conditions: (1) Bottom wall is uniformly heated (2) Bottom wall is sinusoidally heated. The side walls are maintained cold and the top wall is maintained adiabatic. The thermal boundary condition in non-uniform heating case (case 2) is such that the dimensionless average temperature of the bottom wall is equal to that of uniform heating case (case 1). The prime objective of this work is to investigate the influence of uniform and non-uniform heating on entropy generation. The governing mass, momentum and energy equations are solved using Galerkin finite element method. Streamlines, isotherms, contour maps of entropy generation due to heat transfer and fluid friction are studied for Pr = 0.01 (molten metals) and 7 (water) in range of Ra = 103–105. Detailed analysis on the effect of uniform and non-uniform thermal boundary conditions on entropy generation due to heat transfer and fluid friction has been presented. Also, the average Bejan’s number which indicates the relative dominance of entropy generation due to heat transfer or fluid friction and the total entropy generation are studied for each case.

Three Dimensional Numerical Simulation of the Natural Convection in an Annulus With an Internal Slotted Cylinder

2011 ◽  
Author(s):  
Mo Yang ◽  
Jin Wang ◽  
Kun Zhang ◽  
Ling Li ◽  
Yuwen Zhang
Keyword(s):  
Heat Transfer ◽  
Natural Convection ◽  
Numerical Solutions ◽  
Three Dimensional ◽  
Convection Heat Transfer ◽  
Natural Convection Heat Transfer ◽  
Dimensional Model ◽  
Heat Transfer Characteristics ◽  
Flow And Heat Transfer ◽  
Rayleigh Numbers

Detailed numerical analysis is presented for three-dimensional natural convection heat transfer in annulus with an internal concentric slotted cylinder. The internal slotted cylinder and the outer annulus are maintained at uniform but different temperatures. Governing equations are discretized using control volume technique based on staggered grid formulation and solved using SIMPLE algorithm with QUICK scheme. Flow and heat transfer characteristics are investigated for a Rayleigh number range of 10 to 106 while Prandtl number (Pr) is taken to be 0.7. The results indicate, at Rayleigh numbers below 105, the system shows two dimensional flow and heat transfer characteristics. On the other hand, the flow and heat transfer shows three dimensional characteristics while for Rayleigh numbers greater than 5×105. Comparison with experimental results indicated that the numerical solutions by three dimensional model can obtain more accuracy than the numerical solutions by two dimensional model. Besides, Numerical results show that the average equivalent conductivity coefficient of natural convection heat transfer of this problem can be enhanced by as much as 30% while relative slot width is more than 0.1.

Effects of the Heat Transfer at the Side Walls on Natural Convection in Cavities

1990 ◽  
Vol 112 (2) ◽  
pp. 370-378 ◽  
Author(s):  
Y. Le Peutrec ◽  
G. Lauriat
Keyword(s):  
Heat Transfer ◽  
Natural Convection ◽  
Numerical Solutions ◽  
Three Dimensional ◽  
Thermal Conductance ◽  
Fluid Flows ◽  
Heat Losses ◽  
Transfer Rates ◽  
Side Walls ◽  
The Difference

Numerical solutions are obtained for fluid flows and heat transfer rates for three-dimensional natural convection in rectangular enclosures. The effects of heat losses at the conducting side walls are investigated. The problem is related to the design of cavities suitable for visualizing the flow field. The computations cover Rayleigh numbers from 103 to 107 and the thermal conductance of side walls ranging from adiabatic to commonly used glazed walls. The effect of the difference between the ambient temperature and the average temperature of the two isothermal walls is discussed for both air and water-filled enclosures. The results reported in the paper allow quantitative evaluations of the effects of heat losses to the surroundings, which are important considerations in the design of a test cell.

Natural Convection in an Inclined Rectangular Cavity With Different Thermal Boundary Conditions at the Top Plate

1988 ◽  
Vol 110 (2) ◽  
pp. 350-357 ◽  
Author(s):  
T. G. Karayiannis ◽  
J. D. Tarasuk
Keyword(s):  
Heat Transfer ◽  
Natural Convection ◽  
Boundary Conditions ◽  
Forced Convection ◽  
Rectangular Cavity ◽  
Forced Flow ◽  
Cold Plate ◽  
Transfer Rates ◽  
Average Heat ◽  
Thermal Boundary Conditions

Natural convection inside a rectangular cavity with different temperature boundary conditions on the cold top plate was studied using a Mach-Zehnder interferometer for θ = 15, 45, and 60 deg to the horizontal. At θ = 60 deg coupling with external forced convection and non-coupled heat transfer from a cavity with an isothermal top plate was studied. In all experiments the bottom hot plate was isothermal. The Rayleigh number Ra was varied from subcritical to 6×105 and the cavity aspect ratio ARx, from 6.68 to 33.4. The Reynolds number of the external forced flow Redh was constant and approximately equal to 5.8×104. It was found that for Ra ≲ 3×104 the differing thermal boundary conditions at the top plate did not affect the local or average heat transfer rates from the cavity. For Ra ≳ 3×104 coupling at the top plate compared to the non-coupled case resulted not only in a reduction in the variation of the local heat transfer rates at the cold plate, but also in a significant reduction in the variation of the average transfer rates from hot and cold plates of the cavity. Forced convection at the top plate as compared to natural convection resulted only in a small reduction in the heat transfer coefficient at the cold plate. Correlation equations for coupled and noncoupled average heat transfer rates are presented.

A Pseudospectral Analysis of Laminar Natural Convection Flow and Heat Transfer Between Two Inclined Parallel Plates

2006 ◽  
Author(s):  
Serkan Kasapoglu ◽  
Ilker Tari
Keyword(s):  
Heat Transfer ◽  
Natural Convection ◽  
Boundary Conditions ◽  
Boussinesq Approximation ◽  
Temperature Fields ◽  
Convection Flow ◽  
Parallel Plates ◽  
Natural Convection Flow ◽  
Constant Wall Temperature ◽  
Laminar Natural Convection

Three dimensional laminar natural convection flow of and heat transfer in incompressible air between two inclined parallel plates are analyzed with the Boussinesq approximation by using spectral methods. The plates are assumed to be infinitely long in streamwise (x) and spanwise (z) directions. For these directions, periodic boundary conditions are used and for the normal direction (y), constant wall temperature and no slip boundary conditions are used. Unsteady Navier-Stokes and energy equations are solved using a pseudospectral approach in order to obtain velocity and temperature fields inside the channel. Fourier series are used to expand the variables in × and z directions, while Chebyshev polynomials are used to expand the variables in y direction. By using the temperature distribution between the plates, local and average Nusselt numbers (Nu) are calculated. Nu values are correlated with φ, which is the inclination angle, and with Ra·cosφ to compare the results with the literature.

Sign in / Sign up

Export Citation Format

Share Document