Flame Structure and Pollutant Emission Characteristics of a Burning Kerosene Spray With Injection of Diluents

1992 ◽  
Vol 114 (3) ◽  
pp. 209-215 ◽  
Author(s):  
S. R. Gollahalli ◽  
R. Puri
Keyword(s):  
Nitric Oxide ◽  
Carbon Dioxide ◽  
Carbon Monoxide ◽  
Flame Structure ◽  
Flame Length ◽  
Pollutant Emissions ◽  
Pollutant Emission ◽  
Radiation Emission ◽  
Radial Temperature ◽  
Radial Profiles

An experimental study of the effects of diluent gas injection on the structure and pollutant emissions of a kerosene spray from a twin fluid atomizer is presented. Nitrogen and carbon dioxide were used as the diluents. Flame length, radiation emission, axial and radial temperature profiles, and the radial profiles of carbon monoxide, oxygen, nitric oxide, and soot in flame gas samples were studied. The emission index, defined as the mass ratio of the rate of the species emitted to the fuel input rate, was determined from the experimental data. Results show, at a diluent injection rate approximately equal to the atomizing air flow rate, nitrogen was more effective than carbon dioxide in reducing flame length, flame radiation, and the emission indices of carbon monoxide and soot. Although both diluents increased nitric oxide emission, the effect of carbon dioxide was weaker.

scholarly journals Carbon and air pollutant emissions from China's cement industry 1990–2015: trends, evolution of technologies and drivers

2020 ◽  
Author(s):  
Jun Liu ◽  
Dan Tong ◽  
Yixuan Zheng ◽  
Jing Cheng ◽  
Xinying Qin ◽  
...  
Keyword(s):  
Carbon Dioxide ◽  
Large Scale ◽  
Air Pollutant ◽  
Cement Industry ◽  
Pollutant Emissions ◽  
Pollutant Emission ◽  
Climate Mitigation ◽  
Nox Emissions ◽  
Cement Production ◽  
Control Technologies

Abstract. China is the largest cement producer and consumer in the world. Cement manufacturing is highly energy-intensive, and is one of the major contributors to carbon dioxide (CO2) and air pollutant emissions, which threatens climate mitigation and air quality improvement. In this study, we investigated the decadal changes of carbon dioxide and air pollutant emissions for the period of 1990–2015, based on intensive unit-based information on activity rates, production capacity, operation status, and control technologies, which improved the accuracy of the cement emissions in China. We found that, from 1990 to 2015, accompanied by a 10.9-fold increase in cement production, CO2, SO2, and NOx emissions from China's cement industry increased by 626 %, 59 %, and 658 %, whereas CO, PM2.5 and PM10 emissions decreased by 9 %, 66 %, and 63 %, respectively. In the 1990s, driven by the rapid growth of cement production, CO2 and air pollutant emissions increased constantly. Then, the production technology innovation of replacing traditional shaft kilns with the new precalciner kilns in the 2000s markedly reduced SO2, CO and PM emissions from the cement industry. Since 2010, the growing trend of emissions has been further curbed by a combination of measures, including promoting large-scale precalciner production lines and phasing out small ones, upgrading emission standards, installing low-NOx burners (LNB) and selective noncatalytic reduction (SNCR) to reduce NOx emissions, as well as adopting more advanced particulate matter control technologies. Our study highlighted the effectiveness of advanced technologies on air pollutant emission control, however, CO2 emissions from China's cement industry kept growing throughout the period, posing challenges to future carbon emission mitigation in China.

scholarly journals Concentration modeling of hydrocarbons, carbon monoxide, carbon dioxide and nitrogen oxides emitted from cigarette consumption in atmosphere of Isfahan, Iran

2019 ◽  
Author(s):  
Amirreza Talaiekhozani ◽  
Ali Mohammad Amani ◽  
Zeinab Eskandari ◽  
Reza Sanaye
Keyword(s):  
Carbon Dioxide ◽  
Air Pollution ◽  
Carbon Monoxide ◽  
Nitrogen Oxides ◽  
Emission Factors ◽  
The Other ◽  
Cigarette Consumption ◽  
Pollutant Emissions ◽  
Pollutant Sources ◽  
Pollutants Dispersion

Introduction: Although many studies on Isfahan’s air pollution have been done, there is no report about the effects of cigarette consumption in Isfahan. The aims of this study were (a) to find the amount of nitrogen oxides, hydrocarbons, carbon monoxide and carbon dioxide emitted by cigarette consumption in Isfahan; and (b) to model the distribution of such pollutants in Isfahan’s atmosphere. Materials and methods: Based on the literature, it is assumed that 15% of Isfahan’s people consume cigarettes and each smoker on average smokes 1,147 cigarettes per year. Based on these assumptions, the 249,000 smokers living in Isfahan consume 285,000,000 cigarettes per year. The amount of pollutant emissions was calculated by existing emission factors for cigarette consumption. Finally, the distribution of the emitted pollutants from cigarette consumption in Isfahan’s atmosphere was modeled using AERMOD. Results: The results illustrated that each year, 2.85 kg nitrogen oxides, 2.85 kg hydrocarbons, 37.05 kg carbon monoxide and 142.5 kg carbon dioxide are emitted into Isfahan’s atmosphere from residents’ smoking. The modeling of pollutants’ dispersion in Isfahan’s atmosphere showed that only some of these pollutants result from cigarette consumption. Conclusion: This study demonstrated that the amount of pollutants emitted by cigarette consumption was negligible compared to the other pollutant sources in Isfahan.

scholarly journals Pollutant emission in the air of Mogilev region

2019 ◽  
Keyword(s):  
Air Pollution ◽  
Carbon Monoxide ◽  
Sulfur Dioxide ◽  
Pollutant Emissions ◽  
Pollutant Emission ◽  
Atmospheric Air ◽  
Low Level ◽  
High Level ◽  
Stationary Sources ◽  
Emission Density

The purpose of this article is to highlight and analysis of trends in total emissions of polluting substances in atmospheric air of Mogilev region. The main material. A brief overview of Belarusian scientistsʹ research in the fi eld of geoecological conditions of atmospheric air is given in the article. The article deals with pollutants accumulation in the air of Mogilev region from various sources. Mobile sources (64.1% in 2015) are mainly responsible for air pollution in the region. In 2015 in comparison with 2010 there was a decrease in pollutant emissions as a result of transport functioning. Sources of pollutants accumulating in the air are exhaust gases from internal combustion engines, crankcase gases and fuel evaporation from fuel systems. Automobiles dominate in the structure of vehicles (85.3% in 2015). The article considers dynamics of pollutant emissions from stationary sources. The majority of pollutants are found in the air because of technological processes. Hydrocarbons and sulfur dioxide prevail in the structure of emissions of these sources. Chemical industry enterprises (Mogilev chemical fiber, Mogilev artificial fiber plant, etc.) are the sources of air pollution. Substances of the 4th and 3d danger classes predominate in the structure of pollutants in Mogilev region. Substances of the 1st and 2nd danger classes are insignificant. Conclusions. As a result of the conducted research uneven territorial distribution of emission density of the main pollutants in the air of Mogilev region has been established. Kostiukovich and Krichevsk districts are characterized by high level of emission density of suspended substances, carbon monoxide, sulfur dioxide in the air from stationary sources. Cherikov district is characterized by a low level of carbon monoxide, sulfur dioxide, nitrogen oxide emissions per unit area. 71.4% of the administrative districts of Mogilev region are characterized by an average density level of carbon monoxide emissions from stationary sources in relation to the average regional level, 14.3% of districts by lower level, 4.8% by low level and 9.5% by high level. It is advisable to improve the production technology, to equip enterprises with new gas cleaning facilities in order to reduce the anthropogenic load on the environment.

PRELIMINARY STUDY OF PHOTOCHEMICAL BEHAVIOR IN THE SYSTEM NITROGEN DIOXIDE – ETHANE

1955 ◽  
Vol 33 (5) ◽  
pp. 843-848
Author(s):  
T. M. Rohr ◽  
W. Albert Noyes Jr.
Keyword(s):  
Nitric Oxide ◽  
Carbon Dioxide ◽  
Carbon Monoxide ◽  
Nitrogen Dioxide ◽  
Room Temperature ◽  
Reverse Reaction ◽  
Primary Process ◽  
Photochemical Behavior ◽  
Preliminary Study ◽  
Oxygen Atoms

The addition of ethane to nitrogen dioxide either during exposure to radiation transmitted by pyrex, or afterwards, reduces the amount of oxygen formed. At room temperature this is apparently due to the effectiveness of ethane in promoting the reverse reaction of nitric oxide and oxygen to form nitrogen dioxide. At temperatures over 100° there is a reaction which uses oxygen atoms produced in the primary process. Nitroethane (or nitrosoethane) is formed along with carbon monoxide, carbon dioxide, and some methane. The results suggest that acetaldehyde is an intermediate, but acetaldehyde could not be detected because it would react thermally with nitrogen dioxide. It is not possible to give a complete explanation of the results, but suggestions can be made which might form the basis for later work.

Determination of Pollutant Emissions in Car Exhaust Gases

1976 ◽  
Vol 9 (6) ◽  
pp. 221-225
Author(s):  
E. Grimm ◽  
A. Emling ◽  
D. Richardson
Keyword(s):  
Nitric Oxide ◽  
Carbon Monoxide ◽  
Living Conditions ◽  
Pollutant Emissions ◽  
Industrial Areas ◽  
Exhaust Gases ◽  
Car Exhaust

The ever increasing density of industrial areas and the corresponding increase of petrol driven engines emitting harmful elements such as carbon monoxide, hydrocarbons and nitric oxide in the exhaust make it necessary to substantially reduce these toxic levels to create better living conditions. Measures applied in various countries to limit these pollutions are discussed and the operating principles and design of analysers are detailed.

Sign in / Sign up

Export Citation Format

Share Document