Turbulent Flow Foil Bearings for Cryogenic Applications

1995 ◽  
Vol 117 (1) ◽  
pp. 185-195 ◽  
Author(s):  
Luis San Andres
Keyword(s):  
High Speed ◽  
Excitation Frequency ◽  
Liquid Oxygen ◽  
Dynamic Force ◽  
Foil Bearings ◽  
Rotordynamic Coefficients ◽  
Numerical Predictions ◽  
Foil Bearing ◽  
Rotor Support ◽  
System Life

Fluid film foil bearings are an innovative bearing technology proposed for rotor support in cryogenic turbomachinery. These bearings offer system life and rotor speeds currently unachievable with rolling element bearings alone. An isothermal analysis for the turbulent bulk-flow of a variable properties liquid in a foil bearing with a simple elastic matrix is introduced. Numerical predictions compare the static and dynamic force performance of a three pad foil bearing with a rigid surface bearing for a high speed application in liquid oxygen. The major advantages of the foil bearing are immediately apparent, namely linearity in the load versus eccentricity curve, uniform rotordynamic coefficients, and overall unsurpassed stability conditions. The effects of excitation frequency and the foil structural damping on the dynamic force coefficients are discussed.

scholarly journals A New Analysis Tool Assessment for Rotordynamic Modeling of Gas Foil Bearings

2010 ◽  
Author(s):  
Samuel A. Howard ◽  
Luis San Andre´s
Keyword(s):  
Power Loss ◽  
High Speed ◽  
Structural Deformation ◽  
Analysis Tool ◽  
Test Rig ◽  
Contributing Factors ◽  
Foil Bearings ◽  
Rotordynamic Coefficients ◽  
Foil Bearing ◽  
Analytical Tools

Gas foil bearings offer several advantages over traditional bearing types that make them attractive for use in high-speed turbomachinery. They can operate at very high temperatures, require no lubrication supply (oil pumps, seals, etc), exhibit very long life with no maintenance, and once operating airborne, have very low power loss. The use of gas foil bearings in high-speed turbomachinery has been accelerating in recent years, although the pace has been slow. One of the contributing factors to the slow growth has been a lack of analysis tools, benchmarked to measurements, to predict gas foil bearing behavior in rotating machinery. To address this shortcoming, NASA Glenn Research Center (GRC) has supported the development of analytical tools to predict gas foil bearing performance. One of the codes has the capability to predict rotordynamic coefficients, power loss, film thickness, structural deformation, and more. The current paper presents an assessment of the predictive capability of the code, named XLGFBTH©. A test rig at GRC is used as a simulated case study to compare rotordynamic analysis using output from the code to actual rotor response as measured in the test rig. The test rig rotor is supported on two gas foil journal bearings manufactured at GRC, with all pertinent geometry disclosed. The resulting comparison shows that the rotordynamic coefficients calculated using XLGFBTH© represent the dynamics of the system reasonably well, especially as they pertain to predicting critical speeds.

Identification of Dynamic Characteristics of Hybrid Bump-Metal Mesh Foil Bearings

2018 ◽  
Vol 140 (5) ◽  
Author(s):  
Zilong Zhao ◽  
Kai Feng ◽  
Xueyuan Zhao ◽  
Wanhui Liu
Keyword(s):  
Dynamic Characteristics ◽  
High Speed ◽  
Dynamic Stiffness ◽  
Load Test ◽  
Dynamic Force ◽  
Static Load Test ◽  
Metal Mesh ◽  
Force Coefficients ◽  
Foil Bearings ◽  
Foil Bearing

The stability of oil-free high-speed turbo-machinery can be effectively improved by increasing the damping characteristic of the gas foil bearing (GFB). Novel hybrid bump-metal mesh foil bearings (HB-MFBs) have been previously developed. Prior experimental results show that the parallel combination of bump structure and metal mesh not only can improve the structure stiffness but also provide better damping property compared with the bump-type foil structure. To investigate the dynamic behavior of floating HB-MFBs and promote its application, this study measured the dynamic force coefficients of HB-MFBs on a rotating test rig. The vibrations of HB-MFBs with different mesh densities (40%, 32.5%, and 25%) and a generation І bump-type foil bearing (BFB) with similar size are measured under static and impact loads to estimate the bearing characteristics. Static load test results show that the linear stiffness decreases when the air film is generated (from 0 rpm to 20 krpm) but increases gradually with speed (from 20 krpm to 30 krpm, and 40 krpm). Moreover, the dynamic force coefficients of HB-MFBs indicate the significant influence of metal mesh density on bearing dynamic characteristics. The growth in block density increases the dynamic stiffness and damping coefficients of bearing. The comparison of HB-MFB (32.5% and 40%) and BFB emphasizes the good damping characteristics of HB-MFB.

Thermal Effects in Cryogenic Liquid Annular Seals—Part II: Numerical Solution and Results

1993 ◽  
Vol 115 (2) ◽  
pp. 277-284 ◽  
Author(s):  
Luis San Andres ◽  
Zhou Yang ◽  
Dara W. Childs
Keyword(s):  
High Speed ◽  
Nonlinear Differential Equations ◽  
Cryogenic Liquid ◽  
Performance Characteristics ◽  
Liquid Oxygen ◽  
Dynamic Force ◽  
Two Phase ◽  
Numerical Predictions ◽  
Annular Seal ◽  
Static Performance

A numerical thermohydrodynamic model for solution of the nonlinear differential equations describing the turbulent flow of a single-phase, cryogenic liquid annular seal is presented. A perturbation method is used for calculation of the zeroth and first-order flow solutions to determine the seal steady-state response and dynamic force coefficients. Numerical predictions for a high speed liquid oxygen seal with a roughened stator surface show that, relative to an isothermal-barotropic fluidmodel, the adiabatic THD solution presents a significant temperature-rise with a profound effect on the liquid material properties and seal performance characteristics. The calculations show the onset of two-phase flow conditions at moderate eccentricities despite the large pressure differential across the seal. Comparisons of the static performance characteristics for the reference seal show excellent agreement between the approximate analytical solution developed in Part I and the full numerical results.

scholarly journals An Assessment of Gas Foil Bearing Scalability and the Potential Benefits to Civilian Turbofan Engines

2010 ◽  
Author(s):  
Robert J. Bruckner
Keyword(s):  
High Speed ◽  
Load Capacity ◽  
Advanced Technology ◽  
Rolling Element Bearings ◽  
Turbofan Engines ◽  
Foil Bearings ◽  
Foil Bearing ◽  
Fuel Burn ◽  
Rolling Element ◽  
Rotor Support

Over the past several years the term oil-free turbomachinery has been used to describe a rotor support system for high speed turbomachinery that does not require oil for lubrication, damping, or cooling. The foundation technology for oil-free turbomachinery is the compliant foil bearing. This technology can replace the conventional rolling element bearings found in current engines. Two major benefits are realized with this technology. The primary benefit is the elimination of the oil lubrication system, accessory gearbox, tower shaft, and one turbine frame. These components account for 8–13% of the turbofan engine weight. The second benefit that compliant foil bearings offer to turbofan engines is the capability to operate at higher rotational speeds and shaft diameters. While traditional rolling element bearings have diminished life, reliability, and load capacity with increasing speeds, the foil bearing has a load capacity proportional to speed. The traditional applications for foil bearings have been in small, lightweight machines. However, recent advancements in the design and manufacturing of foil bearings have increased their potential size. An analysis, grounded in experimentally proven operation, is performed to assess the scalability of the modern foil bearing. This analysis coupled to the requirements of civilian turbofan engines. The application of the foil bearing to larger, high bypass ratio engines nominally at the 120 kN (∼25000 pound) thrust class has been examined. The application of this advanced technology to this system was found to reduce mission fuel burn by 3.05%.

scholarly journals A New Analysis Tool Assessment for Rotordynamic Modeling of Gas Foil Bearings

2010 ◽  
Vol 133 (2) ◽  
Author(s):  
Samuel A. Howard ◽  
Luis San Andrés
Keyword(s):  
Power Loss ◽  
High Speed ◽  
Structural Deformation ◽  
Analysis Tool ◽  
Test Rig ◽  
Contributing Factors ◽  
Foil Bearings ◽  
Rotordynamic Coefficients ◽  
Foil Bearing ◽  
Analytical Tools

Gas foil bearings offer several advantages over traditional bearing types that make them attractive for use in high-speed turbomachinery. They can operate at very high temperatures, require no lubrication supply (oil pumps, seals, etc.), exhibit very long life with no maintenance, and once operating airborne, have very low power loss. The use of gas foil bearings in high-speed turbomachinery has been accelerating in recent years although the pace has been slow. One of the contributing factors to the slow growth has been a lack of analysis tools, benchmarked to measurements, to predict gas foil bearing behavior in rotating machinery. To address this shortcoming, NASA Glenn Research Center (GRC) has supported the development of analytical tools to predict gas foil bearing performance. One of the codes has the capability to predict rotordynamic coefficients, power loss, film thickness, structural deformation, and more. The current paper presents an assessment of the predictive capability of the code named XLGFBTH©. A test rig at GRC is used as a simulated case study to compare rotordynamic analysis using output from the code to actual rotor response as measured in the test rig. The test rig rotor is supported on two gas foil journal bearings manufactured at GRC with all pertinent geometry disclosed. The resulting comparison shows that the rotordynamic coefficients calculated using XLGFBTH© represent the dynamics of the system reasonably well especially as they pertain to predicting critical speeds.

Experimental Evaluation of the Structure Characterization of a Novel Hybrid Bump-Metal Mesh Foil Bearing

2015 ◽  
Vol 138 (2) ◽  
Author(s):  
Kai Feng ◽  
Yuman Liu ◽  
Xueyuan Zhao ◽  
Wanhui Liu
Keyword(s):  
Excitation Frequency ◽  
Structure Characterization ◽  
Viscous Damping ◽  
Metal Mesh ◽  
Equivalent Viscous Damping ◽  
Foil Bearings ◽  
Damping Characteristics ◽  
Foil Bearing ◽  
Mesh Density ◽  
Load Tests

Rotors supported by gas foil bearings (GFBs) experience stability problem caused by subsynchronous vibrations. To obtain a GFB with satisfactory damping characteristics, this study presented a novel hybrid bump-metal mesh foil bearing (HB-MMFB) that consists of a bump foil and metal mesh blocks in an underlying supporting structure, which takes advantage of both bump-type foil bearings (BFBs) and MMFBs. A test rig with a nonrotating shaft was designed to estimate structure characterization. Results from the static load tests show that the proposed HB-MFBs exhibit an excellent damping level compared with the BFBs with a similar size because of the countless microslips in the metal mesh blocks. In the dynamic load tests, the HB-MFB with a metal mesh density of 36% presents a viscous damping coefficient that is approximately twice that of the test BFB. The dynamics structural coefficients of HB-MFBs, including structural stiffness, equivalent viscous damping, and structural loss factor, are all dependent on excitation frequency and motion amplitude. Moreover, they exhibit an obvious decrease with the decline in metal mesh density.

Rotordynamics Performance of Hybrid Foil Bearing Under Forced Vibration Input

2017 ◽  
Author(s):  
Daejong Kim ◽  
Brian Nicholson ◽  
Lewis Rosado ◽  
Garry Givan
Keyword(s):  
Impulse Response ◽  
High Speed ◽  
Load Capacity ◽  
Supply System ◽  
Forced Response ◽  
Experimental Results ◽  
Lateral Acceleration ◽  
Foil Bearings ◽  
Foil Bearing ◽  
Gas Supply

Foil bearings are one type of hydrodynamic air/gas bearings but with a compliant bearing surface supported by structural material that provides stiffness and damping to the bearing. The hybrid foil bearing (HFB) in this paper is a combination of a traditional hydrodynamic foil bearing with externally-pressurized air/gas supply system to enhance load capacity during the start and to improve thermal stability of the bearing. The HFB is more suitable for relatively large and heavy rotors where rotor weight is comparable to the load capacity of the bearing at full speed and extra air/gas supply system is not a major added cost. With 4,448N∼22,240N thrust class turbine aircraft engines in mind, the test rotor is supported by HFB in one end and duplex rolling element bearings in the other end. This paper presents experimental work on HFB with diameter of 102mm performed at the US Air force Research Laboratory. Experimental works include: measurement of impulse response of the bearing to the external load corresponding to rotor’s lateral acceleration of 5.55g, forced response to external subsynchronous excitation, and high speed imbalance response. A non-linear rotordynamic simulation model was also applied to predict the impulse response and forced subsynchronous response. The simulation results agree well with experimental results. Based on the experimental results and subsequent simulations, an improved HFB design is also suggested for higher impulse load capability up to 10g and rotordynamics stability up to 30,000rpm under subsynchronous excitation.

Rotordynamic Performance of a Shaft With Large Overhung Mass Supported by Foil Bearings

2016 ◽  
Vol 139 (4) ◽  
Author(s):  
Nguyen LaTray ◽  
Daejong Kim
Keyword(s):  
High Speed ◽  
Foil Bearings ◽  
Speed Test ◽  
Foil Bearing ◽  
Stable Conditions ◽  
Bending Mode ◽  
Mode Vibration ◽  
Lift Off ◽  
Compact Design ◽  
Bearing System

This work presents the theoretical and experimental rotordynamic evaluations of a rotor–air foil bearing (AFB) system supporting a large overhung mass for high-speed application. The proposed system highlights the compact design of a single shaft rotor configuration with turbomachine components arranged on one side of the bearing span. In this work, low-speed tests up to 45 krpm are performed to measure lift-off speed and to check bearing manufacturing quality. Rotordynamic performance at high speeds is evaluated both analytically and experimentally. In the analytical approach, simulated imbalance responses are studied using both rigid and flexible shaft models with bearing forces calculated from the transient Reynolds equation along with the rotor motion. The simulation predicts that the system experiences small synchronous rigid mode vibration at 20 krpm and bending mode at 200 krpm. A high-speed test rig is designed to experimentally evaluate the rotor–air foil bearing system. The high-speed tests are operated up to 160 krpm. The vibration spectrum indicates that the rotor–air foil bearing system operates under stable conditions. The experimental waterfall plots also show very small subsynchronous vibrations with frequency locked to the system natural frequency. Overall, this work demonstrates potential capability of the air foil bearings in supporting a shaft with a large overhung mass at high speed.

Influence of geometric parameters on the bump foil bearing performance

2019 ◽  
Vol 234 (7) ◽  
pp. 1017-1026
Author(s):  
Sadanand Kulkarni ◽  
Soumendu Jana
Keyword(s):  
Carrying Capacity ◽  
High Speed ◽  
System Development ◽  
Load Capacity ◽  
Radial Clearance ◽  
Load Carrying Capacity ◽  
Foil Bearings ◽  
Foil Bearing ◽  
Load Carrying ◽  
Lift Off

High-speed rotating system development has drawn considerable attention of the researchers, in the recent past. Foil bearings are one of the major contenders for such applications, particularly for high speed and low load rotating systems. In foil bearings, process fluid or air is used as the working medium and no additional lubricant is required. It is known from the published literature that the load capacity of foil bearings depend on the operating speed, viscosity of the medium, clearance, and stiffness of the foil apart from the geometric dimensions of the bearing. In case of foil bearing with given dimensions, clearance governs the magnitude of pressure developed, whereas stiffness dictates the change in radial clearance under the generated pressure. This article deals with the effect of stiffness, clearance, and its interaction on the bump foil bearings load-carrying capacity. For this study, four sets of foil bearings of the same geometry with two levels of stiffness and clearance values are fabricated. Experiments are carried out following two factor-two level factorial design approach under constant load and in each case, the lift-off speed is measured. The experimental output is analyzed using statistical techniques to evaluate the influence of parameters under consideration. The results indicate that clearance has the maximum influence on the lift-off speed/ load-carrying capacity, followed by interaction effect and stiffness. A regression model is developed based on the experimental values and model is validated using error analysis technique.

scholarly journals Rotor dynamic experimental investigation of an ultra-high-speed permanent magnet synchronous motor supported on a three-pad bidirectional gas foil bearing

2019 ◽  
Vol 11 (9) ◽  
pp. 168781401987536
Author(s):  
Wenjie Cheng ◽  
Zhikai Deng ◽  
Ling Xiao ◽  
Bin Zhong ◽  
Wenbo Duan
Keyword(s):  
Permanent Magnet ◽  
High Speed ◽  
Permanent Magnet Synchronous Motor ◽  
Synchronous Motor ◽  
Rotor System ◽  
Permanent Magnet Motors ◽  
Foil Bearings ◽  
Foil Bearing ◽  
Ultra High Speed ◽  
Rotor Dynamic

With a 10-kW, 120,000-r/min, ultra-high-speed permanent magnet synchronous motor taken as a prototype, experimental research is conducted on the rotor dynamic behaviours of a three-pad bidirectional gas foil bearing high-speed motor rotor system. Load-carrying properties of the three-pad bidirectional gas foil bearing are analysed, and natural frequencies of conical and parallel whirling modes of the elastically supported rotor are calculated based on an appropriate simplification to the stiffness and damping coefficients of the gas foil bearings. The prototype passes through a 90,000-r/min coast-down experiment. Experiments show that there are violent subsynchronous whirling motions that are evoked by the gas foil bearing–rotor system itself. The cause of shaft orbit drift is analysed, and the corresponding solution is put forward. The theoretical analysis and experimental results can offer a useful reference to the bearing–rotor system design of ultra-high-speed permanent magnet motors and its subsequent dynamic analysis.

Sign in / Sign up

Export Citation Format

Share Document