Identification of Dynamic Characteristics of Hybrid Bump-Metal Mesh Foil Bearings

2018 ◽  
Vol 140 (5) ◽  
Author(s):  
Zilong Zhao ◽  
Kai Feng ◽  
Xueyuan Zhao ◽  
Wanhui Liu
Keyword(s):  
Dynamic Characteristics ◽  
High Speed ◽  
Dynamic Stiffness ◽  
Load Test ◽  
Dynamic Force ◽  
Static Load Test ◽  
Metal Mesh ◽  
Force Coefficients ◽  
Foil Bearings ◽  
Foil Bearing

The stability of oil-free high-speed turbo-machinery can be effectively improved by increasing the damping characteristic of the gas foil bearing (GFB). Novel hybrid bump-metal mesh foil bearings (HB-MFBs) have been previously developed. Prior experimental results show that the parallel combination of bump structure and metal mesh not only can improve the structure stiffness but also provide better damping property compared with the bump-type foil structure. To investigate the dynamic behavior of floating HB-MFBs and promote its application, this study measured the dynamic force coefficients of HB-MFBs on a rotating test rig. The vibrations of HB-MFBs with different mesh densities (40%, 32.5%, and 25%) and a generation І bump-type foil bearing (BFB) with similar size are measured under static and impact loads to estimate the bearing characteristics. Static load test results show that the linear stiffness decreases when the air film is generated (from 0 rpm to 20 krpm) but increases gradually with speed (from 20 krpm to 30 krpm, and 40 krpm). Moreover, the dynamic force coefficients of HB-MFBs indicate the significant influence of metal mesh density on bearing dynamic characteristics. The growth in block density increases the dynamic stiffness and damping coefficients of bearing. The comparison of HB-MFB (32.5% and 40%) and BFB emphasizes the good damping characteristics of HB-MFB.

A Metal Mesh Foil Bearing and a Bump-Type Foil Bearing: Comparison of Performance for Two Similar Size Gas Bearings

2012 ◽  
Vol 134 (10) ◽  
Author(s):  
Luis San Andrés ◽  
Thomas Abraham Chirathadam
Keyword(s):  
Manufacturing Cost ◽  
Dynamic Force ◽  
Metal Mesh ◽  
Gas Bearings ◽  
Force Coefficients ◽  
Foil Bearings ◽  
Advantages And Disadvantages ◽  
Foil Bearing ◽  
Start Up ◽  
Lift Off

Gas bearings in oil-free microturbomachinery for gas process applications and power generation (<400 kW) must be reliable and inexpensive, ensuring low drag power and thermal stability. Bump-type foil bearings (BFBs) and overleaf-type foil bearings are in use in specialized applications, though their development time (design and prototyping), exotic materials, and excessive manufacturing cost still prevent their widespread usage. Metal mesh foil bearings (MMFBs), on the other hand, are an inexpensive alternative that use common materials and no restrictions on intellectual property. Laboratory testing shows that prototype MMFBs perform similarly as typical BFBs, but offer significantly larger damping to dissipate mechanical energy due to rotor vibrations. This paper details a one-to-one comparison of the static and dynamic forced performance characteristics of a MMFB against a BFB of similar size and showcases the advantages and disadvantages of MMFBs. The bearings for comparison are a generation I BFB and a MMFB, both with a slenderness ratio L/D = 1.04. Measurements of rotor lift-off speed and drag friction at start-up and airborne conditions were conducted for rotor speeds to 70 krpm and under identical specific loads (W/LD = 0.06 to 0.26 bar). Static load versus bearing elastic deflection tests evidence a typical hardening nonlinearity with mechanical hysteresis, the MMFB showing two to three times more material damping than the BFB. The MMFB exhibits larger drag torques during rotor start-up, and shut-down tests though bearing lift-off happens at lower rotor speeds (∼15 krpm). As the rotor becomes airborne, both bearings offer very low drag friction coefficients, ∼0.03 for the MMFB and ∼0.04 for the BFB in the speed range 20–40 krpm. With the bearings floating on a journal spinning at 50 krpm, the MMFB dynamic direct force coefficients show little frequency dependency, while the BFB stiffness and damping increases with frequency (200–400 Hz). The BFB has a much larger stiffness and viscous damping coefficients than the MMFB. However, the MMFB material loss factor is at least twice as large as that in the BFB. The experiments show that the MMFB, when compared to the BFB, has a lower drag power and earlier lift-off speed and with dynamic force coefficients having a lesser dependency on whirl frequency excitation.

A Metal Mesh Foil Bearing and a Bump-Type Foil Bearing: Comparison of Performance for Two Similar Size Gas Bearings

2012 ◽  
Author(s):  
Luis San Andrés ◽  
Thomas Abraham Chirathadam
Keyword(s):  
Manufacturing Cost ◽  
Dynamic Force ◽  
Metal Mesh ◽  
Gas Bearings ◽  
Force Coefficients ◽  
Foil Bearings ◽  
Advantages And Disadvantages ◽  
Foil Bearing ◽  
Start Up ◽  
Lift Off

Gas bearings in oil-free microturbomachinery for gas process applications and power generation (< 400 kW) must be reliable and inexpensive, ensuring low drag power and thermal stability. Bump-type foil bearings (B-FBs) and overleaf-type foil bearings are in use in specialized applications, though their development-time (design and prototyping), exotic materials, and excessive manufacturing cost still prevent their widespread usage. Metal mesh foil bearings (MMFBs), on the other hand, are an inexpensive alternative that uses common materials and no restrictions on intellectual property. Laboratory testing shows that prototype MMFBs perform similarly as typical BFBs but offering significantly larger damping to dissipate mechanical energy due to rotor vibrations. This paper details a one-to-one comparison of the static and dynamic forced performance characteristics of a MMFB against a BFB of similar size and showcases the advantages and disadvantages of MMFBs. The bearings for comparison are a Generation I BFB and a MMFB, both with a slenderness ratio L/D = 1.04. Measurements of rotor lift-off speed and drag friction at start-up and airborne conditions were conducted for rotor speeds to 70 krpm and under identical specific loads (W/LD = 0.06 to 0.26 bar). Static load versus bearing elastic deflection tests evidence a typical hardening nonlinearity with mechanical hysteresis; the MMFB showing two to three times more material damping than the BFB. The MMFB exhibits larger drag torques during rotor start-up and shut-down tests though bearing lift-off happens at lower rotor speeds (∼15 krpm). As the rotor becomes airborne, both bearings offer very low drag friction coefficients, ∼0.03 for the MMFB and ∼0.04 for the BFB in the speed range 20–40 krpm. With the bearings floating on a journal spinning at 50 krpm, the MMFB dynamic direct force coefficients show little frequency dependency, while the BFB stiffness and damping increases with frequency (200–400 Hz). The BFB has a much larger stiffness and viscous damping coefficients than the MMFB. However, the MMFB material loss factor is at least twice as large as that in the BFB. The experiments show the MMFB, when compared to the BFB, has a lower drag power and earlier lift-off speed, and with dynamic force coefficients having a lesser dependency on whirl frequency excitation.

The Dynamic Characteristics of a Turborotor Simulator Supported on Gas-Lubricated Foil Bearings—Part 3: Rotation in Foil Bearings of Reduced Length, With Starting and Stopping Unaided by External Pressurization

1972 ◽  
Vol 94 (3) ◽  
pp. 211-220 ◽  
Author(s):  
L. Licht
Keyword(s):  
Dynamic Characteristics ◽  
High Speed ◽  
Experimental Methods ◽  
Wear Characteristics ◽  
Foil Bearings ◽  
Foil Bearing

Experiments and analysis, reported in detail in references [1] through [5], demonstrated that high-speed rotors, supported by foil bearings, were free from whirl-instability and sensitivity to excitation at frequency equal one half the speed of rotation. It was shown also that the foil bearing could accommodate thermal and geometrical distortions, combining this attribute with excellent wipe-wear characteristics and tolerance of particles. The present investigation was directed toward the solution of two important problems: (a) the reduction of foil bearing length without detriment to rotor performance, and (b) the elimination of the foil-lift system and attainment of multiple start-stops without the aid of external pressurization. A description of experimental methods, which lead to the realization of the foregoing objectives, is given.

scholarly journals The Dynamic Characteristics of a Turborotor Simulator Supported on Gas-Lubricated Foil Bearings—Part 2: Operation With Heating and Thermal Gradients

1970 ◽  
Vol 92 (4) ◽  
pp. 650-659 ◽  
Author(s):  
L. Licht
Keyword(s):  
Dynamic Characteristics ◽  
High Speed ◽  
Elevated Temperatures ◽  
Load Capacity ◽  
Temperature Gradients ◽  
Thermal Gradients ◽  
Foil Bearings ◽  
Foil Bearing ◽  
Geometrical Imperfections ◽  
The Stability

A high-speed rotor, supported by gas-lubricated foil bearings, is free from self-excited whirl and displays no loss of load capacity when vibrated at frequency equal half the rotational speed [1]. It is demonstrated here that in addition to tolerance of geometrical imperfections, misalignment, and foreign particles [3, 4], the foil bearing performs well at elevated temperatures and accommodates appreciable temperature gradients. The foil bearing is endowed with superior wipe-wear characteristics, and the flexibility of the foil accounts not only for the stability of the foil bearing but also for its forgiveness with respect to distortion, contamination, and contact.

Experiments and predictions on the performance of double-bump foil bearings: Effects of bearing loads and height difference between bumps

2017 ◽  
Vol 231 (11) ◽  
pp. 1474-1485 ◽  
Author(s):  
Kai Feng ◽  
Tao Zhang ◽  
Xueyuan Zhao
Keyword(s):  
Load Capacity ◽  
Load Test ◽  
Underlying Structure ◽  
Viscous Damping ◽  
Structural Stiffness ◽  
Static Load Test ◽  
Height Difference ◽  
Equivalent Viscous Damping ◽  
Foil Bearings ◽  
Foil Bearing

The concept of multilayer bump foils was introduced in the design of bump foil bearings to produce a double-bump foil bearing, which can provide increased load capacity and damping by adding another bump foil in the underlying structure. The height difference between the upper and lower bumps is a crucial parameter in the design and application of such structure. In this study, two double-bump foil bearings with various height differences between bumps are designed and fabricated to compare with an ordinary bump foil bearing. Three bearings are examined via static and dynamic load tests to estimate the structural stiffness and equivalent viscous damping. Test results indicate that lower bumps can enhance both the structural stiffness and equivalent viscous damping. A theoretical link-spring model, which exhibits good agreement with the data obtained from the static load test, is adopted to analyze the effect of height difference between bumps on gas film thickness and gas pressure of double-bump foil bearings. Results show that lower bumps of the double-bump foil bearing with a smaller height difference become active more easily and are more likely to form a stable double-bump supporting structure.

On the Coupling of Foil Bearing Supported Rotors: Part 1 — Analysis

2007 ◽  
Author(s):  
Hooshang Heshmat ◽  
James F. Walton ◽  
Crystal A. Heshmat
Keyword(s):  
Dynamic Characteristics ◽  
High Speed ◽  
Ball Bearing ◽  
Dynamic Performance ◽  
Rotor Systems ◽  
Foil Bearings ◽  
Foil Bearing ◽  
Flexible Rotors ◽  
Coupling Dynamic ◽  
Bearing System

The expanded application of high-speed rotor systems operating on compliant foil bearings will be greatly enhanced with the ability to adequately couple multiple shaft systems with differing bearing systems and dynamic performance. In this paper the results of an analytical tradeoff study assessing coupling dynamic characteristics and their impact on coupled rotor-bearing system dynamics are presented. This analysis effort was completed in an effort to establish the form of characteristics needed to couple foil bearing supported rotors to ball bearing supported rotors, other foil bearing supported rotors as well as coupling rigid and flexible rotors both supported on foil bearings. The conclusions from this study indicate that with appropriate coupling design, a wide array of foil bearing supported rotor systems may be successfully coupled.

Dynamic Characteristics of a High-Speed Rotor With Radial and Axial Foil-Bearing Supports

1981 ◽  
Vol 103 (3) ◽  
pp. 361-370 ◽  
Author(s):  
L. Licht ◽  
W. J. Anderson ◽  
S. W. Doroff
Keyword(s):  
Support System ◽  
Dynamic Characteristics ◽  
High Speed ◽  
Journal Bearing ◽  
Foil Bearings ◽  
Flexible Support ◽  
Foil Bearing ◽  
Experimental Apparatus ◽  
Asymmetric Rotor

An asymmetric rotor (19N; 4.3 lb), supported radially and axially by compliant bearings (foil bearings), is subjected to severe excitation by rotating unbalance (43 μm.N; 6100 μin.oz) in the “pitching” mode, at speeds to 50,000 rpm. The resilient, air-lubricated bearings provide very effective damping, so that regions of resonance and instability can be traversed with impunity, with amplitudes and limit-trajectories remaining within acceptable bounds. A novel journal bearing is introduced, in which a resilient support is furnished by the outer turn of the coiled foil-element, initially bent to form an open polygon. The experimental apparatus and procedure are described, and the response of the rotor and flexible support system are copiously documented by oscilloscope records of motion.

Identification of Rotordynamic Force Coefficients of a Metal Mesh Foil Bearing Using Impact Load Excitations

2010 ◽  
Author(s):  
Luis San Andre´s ◽  
Thomas Abraham Chirathadam
Keyword(s):  
High Speed ◽  
Impact Load ◽  
Mechanical Energy ◽  
Excitation Frequency ◽  
Forced Response ◽  
Dynamic Force ◽  
Rotating Shaft ◽  
Metal Mesh ◽  
Force Coefficients ◽  
Shaft Rotation

Metal mesh foil bearings (MMFB) are an inexpensive compliant gas bearing type that aims to enable high speed, high temperature operation of small turbomachinery. A MMFB with an inner diameter of 28.00 mm and length of 28.05 mm is constructed with low cost and common materials. The bearing incorporates a copper mesh ring, 20% in compactness and offering large material damping, beneath a 0.127mm thick preformed top foil. Prior experimentation (published papers) provide the bearing structure force coefficients and the break away torque for bearing lift off. Presently, the MMFB replaces a compressor in a small turbocharger driven test rig. Impact load tests aid to identify the direct and cross-coupled rotor dynamic force coefficients of the floating MMFB while operating at a speed of 50 krpm. Tests conducted with and without shaft rotation show the MMFB direct stiffness is less than its structural (static) stiffness, ∼25% lower at an excitation frequency of 200 Hz. The thin air film acting in series with the metal mesh support, and separating the rotating shaft and the bearing inner surface while airborne, reduces the bearing stiffness. The equivalent viscous damping is nearly identical with and without shaft rotation. The identified loss factor, best representing the hysteretic type damping from the metal mesh, is high at ∼0.50 in the frequency range 0–200 Hz. This magnitude reveals large mechanical energy dissipation ability from the MMFB. The measurements also show appreciable cross directional motions from the unidirectional impact loads, thus generating appreciable cross coupled force coefficients. Rotor speed coast down measurements reveal pronounced subsynchronous whirl motion amplitudes locked at distinct frequencies. The MMFB stiffness hardening nonlinearity produces the rich frequency forced response. The synchronous as well as subsynchronous motions peak while the shaft traverses its critical speeds. The measurements establish reliable operation of the test MMFB while airborne.

Performance Characteristics of Metal Mesh Foil Bearings: Predictions vs. Measurements

2013 ◽  
Author(s):  
Luis San Andrés ◽  
Thomas Abraham Chirathadam
Keyword(s):  
Low Cost ◽  
Excitation Frequency ◽  
Element Model ◽  
Rotating Machinery ◽  
Performance Characteristics ◽  
Dynamic Force ◽  
Metal Mesh ◽  
Force Coefficients ◽  
Foil Bearings ◽  
Damping Coefficients

Proven low-cost gas bearing technologies are sought to enable more compact rotating machinery products with extended maintenance intervals. The paper presents an analysis for predicting the static and dynamic forced performance characteristics of metal mesh foil bearings (MMFBs) which comprise of a top foil supported on a layer of metal mesh of certain compactness. The analysis couples a finite element model of the top foil and underspring support with the gas film Reynolds equation. Comparison of predictions against laboratory measurements with two bearings aims to validate the analysis. The predicted drag friction factor in one bearing (L = D = 28.00 mm) during full film operation is just f ∼ 0.03 at ∼ 50 krpm, agreeing well with measurements at increasing applied loads. The predictions further elucidate the effect of the applied load and rotor speed on the bearing minimum film thickness, journal eccentricity and attitude angle. For a second bearing (L = 38.0 mm, D = 36.5 mm), predicted bearing force coefficients show magnitudes comparable with the measurements, with less than 20% difference, in the 250–350 Hz excitation frequency range. While the predicted direct stiffness coefficients are rather constant, the experimental force coefficients increase with frequency (max. 400 Hz), due mainly to the increasing amplitudes of dynamic force applied to excite the bearing with a set amplitude of motion. The analysis under predicts the direct damping coefficients at high frequencies (>300 Hz). The cross-coupled stiffness and damping coefficients are typically lower (< 40%) than the direct ones. The bearings operated stable at all speeds without any sub synchronous whirl. The reasonable agreement of the predictions with the available test data promote the better design and further development of MMFB supported rotating machinery.

Identification of Rotordynamic Force Coefficients of a Metal Mesh Foil Bearing Using Impact Load Excitations

2011 ◽  
Vol 133 (11) ◽  
Author(s):  
Luis San Andrés ◽  
Thomas Abraham Chirathadam
Keyword(s):  
High Speed ◽  
Impact Load ◽  
Mechanical Energy ◽  
Excitation Frequency ◽  
Forced Response ◽  
Dynamic Force ◽  
Rotating Shaft ◽  
Metal Mesh ◽  
Force Coefficients ◽  
Shaft Rotation

Metal mesh foil bearings (MMFBs) are inexpensive compliant gas bearing type that aim to enable high speed, high temperature operation of small turbomachinery. A MMFB with an inner diameter of 28.00 mm and length of 28.05 mm is constructed with low cost and common materials. The bearing incorporates a copper mesh ring, 20% in compactness, and offering large material damping beneath a 0.127 mm thick preformed top foil. Prior experimentations (published papers) provide the bearing structure force coefficients and the break away torque for bearing lift off. Presently, the MMFB replaces a compressor in a small turbocharger driven test rig. Impact load tests aid to identify the direct and cross-coupled rotor dynamic force coefficients of the floating MMFB while operating at a speed of 50 krpm. Tests conducted with and without shaft rotation show the MMFB direct stiffness is less than its structural (static) stiffness, ∼25% lower at an excitation frequency of 200 Hz. The thin air film acting in series with the metal mesh support and separating the rotating shaft and the bearing inner surface while airborne reduces the bearing stiffness. The equivalent viscous damping is nearly identical with and without shaft rotation. The identified loss factor, best representing the hysteretic type damping from the metal mesh, is high at ∼0.50 in the frequency range 0–200 Hz. This magnitude reveals large mechanical energy dissipation ability from the MMFB. The measurements also show appreciable cross directional motions from the unidirectional impact loads, thus generating appreciable cross-coupled force coefficients. Rotor speed coast down measurements reveal pronounced subsynchronous whirl motion amplitudes locked at distinct frequencies. The MMFB stiffness hardening nonlinearity produces the rich frequency forced response. The synchronous as well as subsynchronous motions peak while the shaft traverses its critical speeds. The measurements establish reliable operation of the test MMFB while airborne.

Sign in / Sign up

Export Citation Format

Share Document