Tensile and Bending Behavior of Sintered Alloys: Experimental Results and Modeling

1998 ◽  
Vol 120 (3) ◽  
pp. 248-255 ◽  
Author(s):  
L. Bertini ◽  
V. Fontanari ◽  
G. Straffelini
Keyword(s):  
Compressive Loading ◽  
Analytical Models ◽  
Uniaxial Tensile ◽  
Stress Strain ◽  
Element Analysis ◽  
Strain Behavior ◽  
Bending Behavior ◽  
Sintered Alloys ◽  
Sintered Materials ◽  
Plastic Stress

Sintered materials show a different stress-strain behavior when subjected to tensile or compressive loading, the response to compression being characterized by a higher elastic modulus, yield stress, and strain hardening rate. These differences tend to make the bending behavior somewhat more complex to analyze, particularly in the elasto-plastic field, as compared to conventional materials, having equal mechanical properties under tension and compression. As a consequence, the use of widely applied test techniques, such as the Three Point Bending (TPB), becomes more difficult for sintered materials, due to the lack of reliable analytical models capable of evaluating elasto-plastic stress-strain distribution as a function of applied load and deflection. In the present investigation, the results of uniaxial tensile-compressive and bending tests conducted on sintered ferrous alloys characterized by different microstructures and porosity are reported and briefly discussed. Then an analytical model, specifically aimed to analyze the elasto-plastic monotonic behavior of a TPB specimen made with a material having different tensile and compressive properties, is presented. Its predictions as regards load-deflection curves and elasto-plastic stress-strain distributions are compared with the results of TPB tests and of numerical (Finite Element) analysis, showing a fairly good agreement.

Cord/Rubber Material Properties

1985 ◽  
Vol 58 (4) ◽  
pp. 830-856 ◽  
Author(s):  
R. J. Cembrola ◽  
T. J. Dudek
Keyword(s):  
Finite Element ◽  
Material Model ◽  
Rubber Composites ◽  
Stress Strain ◽  
Element Analysis ◽  
Rubber Layer ◽  
Strain Behavior ◽  
Nonlinear Stress ◽  
Interlaminar Shear ◽  
Mechanics Of Composite Materials

Abstract Recent developments in nonlinear finite element methods (FEM) and mechanics of composite materials have made it possible to handle complex tire mechanics problems involving large deformations and moderate strains. The development of an accurate material model for cord/rubber composites is a necessary requirement for the application of these powerful finite element programs to practical problems but involves numerous complexities. Difficulties associated with the application of classical lamination theory to cord/rubber composites were reviewed. The complexity of the material characterization of cord/rubber composites by experimental means was also discussed. This complexity arises from the highly anisotropic properties of twisted cords and the nonlinear stress—strain behavior of the laminates. Micromechanics theories, which have been successfully applied to hard composites (i.e., graphite—epoxy) have been shown to be inadequate in predicting some of the properties of the calendered fabric ply material from the properties of the cord and rubber. Finite element models which include an interply rubber layer to account for the interlaminar shear have been shown to give a better representation of cord/rubber laminate behavior in tension and bending. The application of finite element analysis to more refined models of complex structures like tires, however, requires the development of a more realistic material model which would account for the nonlinear stress—strain properties of cord/rubber composites.

Hyperelastic Muscle Simulation

2007 ◽  
Vol 345-346 ◽  
pp. 1241-1244 ◽  
Author(s):  
Mohd. Zahid Ansari ◽  
Sang Kyo Lee ◽  
Chong Du Cho
Keyword(s):  
Skeletal Muscle ◽  
Silicone Rubber ◽  
Soft Tissues ◽  
Material Model ◽  
Incompressible Material ◽  
Material Behavior ◽  
Rubber Tube ◽  
Stress Strain ◽  
Element Analysis ◽  
Strain Behavior

Biological soft tissues like muscles and cartilages are anisotropic, inhomogeneous, and nearly incompressible. The incompressible material behavior may lead to some difficulties in numerical simulation, such as volumetric locking and solution divergence. Mixed u-P formulations can be used to overcome incompressible material problems. The hyperelastic materials can be used to describe the biological skeletal muscle behavior. In this study, experiments are conducted to obtain the stress-strain behavior of a solid silicone rubber tube. It is used to emulate the skeletal muscle tensile behavior. The stress-strain behavior of silicone is compared with that of muscles. A commercial finite element analysis package ABAQUS is used to simulate the stress-strain behavior of silicone rubber. Results show that mixed u-P formulations with hyperelastic material model can be used to successfully simulate the muscle material behavior. Such an analysis can be used to simulate and analyze other soft tissues that show similar behavior.

Transverse Young's modulus of carbon/glass hybrid fiber composites

2019 ◽  
Vol 54 (7) ◽  
pp. 947-960
Author(s):  
Ganesh Venkatesan ◽  
Maximilian J Ripepi ◽  
Charles E Bakis
Keyword(s):  
Finite Element ◽  
Glass Fiber ◽  
Fiber Composites ◽  
Stress Model ◽  
Hybrid Fiber ◽  
Stress Strain ◽  
Element Analysis ◽  
Strain Behavior ◽  
The Matrix ◽  
Transverse Modulus

Hybrid fiber composites offer designers a means of tailoring the stress–strain behavior of lightweight materials used in high-performance structures. While the longitudinal stress–strain behavior of unidirectional hybrid fiber composites has been thoroughly evaluated experimentally and analytically, relatively little information is available on the transverse behavior. The objective of the current investigation is to present data on the transverse modulus of elasticity of unidirectional composites with five different ratios of carbon and glass fiber and to compare the data with predictive and fitted models. The transverse modulus increases monotonically with the proportion of glass fiber in the composite. Finite element analysis was used to evaluate different ways to model voids in the matrix and allowed the unknown transverse properties of the carbon fibers to be backed out using experimental data from the all-carbon composite. The finite element results show that the transverse modulus can be accurately modeled if voids are modeled explicitly in the matrix region and if modulus is calculated based on stress applied along the minimum interfiber distance path between adjacent fibers arranged in a rectangular array. The transverse modulus was under-predicted by the iso-stress model and was well predicted by a modified iso-stress model and a modified Halpin–Tsai model.

Nonlinear Rate-Dependent Stress-Strain Behavior of Light-Weight Textile Conveyor Belt

2011 ◽  
Vol 675-677 ◽  
pp. 453-456
Author(s):  
Ze Xing Wang ◽  
Jin Hua Jiang ◽  
Nan Liang Chen
Keyword(s):  
Loading Rate ◽  
Testing Machine ◽  
Rate Sensitivity ◽  
Sensitivity Coefficient ◽  
Conveyor Belt ◽  
Uniaxial Tensile ◽  
Stress Strain ◽  
Strain Behavior ◽  
Rate Dependent ◽  
Dependent Behavior

In order to investigate the effect of loading rate on the tensile performance, the uniaxial tensile experiments were conducted on universal testing machine under different loading rates (5 mm/min, 10mm/min, 50 mm/min, 100 mm/min and 150 mm/min), and a constant gage length equal to 200mm, resulting in loading strain rate of 4.17×10-4, 8.33×10-4/s, 4.17×10-3/s, 8.33×10-3/s,1.25×10-2/s, and the tensile stress-strain curves were obtained. The experimental results show that the tensile properties of the conveyor belt exhibit obvious rate-dependent behavior. In this paper, the rate sensitivity coefficient varied with loading rate, was calculated, and the nonlinear rate-dependent behavior was also investigated.

scholarly journals Mechanical Strength Evaluation of Elastic Materials by Multiphysical Nondestructive Methods: A Review

2020 ◽  
Vol 10 (5) ◽  
pp. 1588 ◽  
Author(s):  
Huiting Huan ◽  
Lixian Liu ◽  
Andreas Mandelis ◽  
Cuiling Peng ◽  
Xiaolong Chen ◽  
...  
Keyword(s):  
Mechanical Strength ◽  
Optical Radiation ◽  
Defect Formation ◽  
State Of The Art ◽  
Compressive Loading ◽  
Stress Strain ◽  
Strength Evaluation ◽  
Strain Behavior ◽  
Stress Strain Relation ◽  
The Stability

The main purpose of industrial nondestructive testing (NDT) is to diagnose the stability, reliability and failure probability of materials, components and structures. Industrial component mechanical strength is one of the most important properties NDT is used to characterize. Subtle but perceptible changes in stress-strain behavior can be reliable indicators of defect formation. A detailed review on the state-of-the-art NDT methods using optical-radiation, photoacoustic, and photothermal techniques for mechanical strength evaluation and defect pre-diagnosis is presented in this article. Mechanical strength is analyzed in terms of the deformation/strain field, the stress-strain relation, and the residual stress in an elastic material subjected to tensile or compressive loading, or impact. By introducing typical NDT experiments, the history and features of each methodology are revisited and typical applications are discussed. This review also aims to be used as a reference toward further research and development of NDT technologies characterizing mechanical strength of materials and components.

Studies on the Stress-Strain Relationship Bovine Cortical Bone Based on Ramberg–Osgood Equation

2019 ◽  
Vol 141 (4) ◽  
Author(s):  
N. K. Sharma ◽  
M. D. Sarker ◽  
Saman Naghieh ◽  
Daniel X. B. Chen
Keyword(s):  
Cortical Bone ◽  
Linear Regression Analysis ◽  
Tensile Tests ◽  
Uniaxial Tensile ◽  
Loading Conditions ◽  
Stress Strain ◽  
Strain Behavior ◽  
Nonlinear Stress ◽  
Strain Relationship ◽  
Relationship Of

Bone is a complex material that exhibits an amount of plasticity before bone fracture takes place, where the nonlinear relationship between stress and strain is of importance to understand the mechanism behind the fracture. This brief presents our study on the examination of the stress–strain relationship of bovine femoral cortical bone and the relationship representation by employing the Ramberg–Osgood (R–O) equation. Samples were taken and prepared from different locations (upper, middle, and lower) of bone diaphysis and were then subjected to the uniaxial tensile tests under longitudinal and transverse loading conditions, respectively. The stress–strain curves obtained from tests were analyzed via linear regression analysis based on the R–O equation. Our results illustrated that the R–O equation is appropriate to describe the nonlinear stress–strain behavior of cortical bone, while the values of equation parameters vary with the sample locations (upper, middle, and lower) and loading conditions (longitudinal and transverse).

scholarly journals Microstructural, Surface Topology and Nanomechanical Characterization of Electrodeposited Ni-P/SiC Nanocomposite Coatings

2019 ◽  
Vol 9 (14) ◽  
pp. 2901 ◽  
Author(s):  
Konstantinos Tsongas ◽  
Dimitrios Tzetzis ◽  
Alexander Karantzalis ◽  
George Banias ◽  
Dimitrios Exarchos ◽  
...  
Keyword(s):  
Heat Treatment ◽  
Computational Models ◽  
Intermetallic Phase ◽  
Three Dimensional ◽  
Surface Topology ◽  
Nanocomposite Coatings ◽  
Stress Strain ◽  
Element Analysis ◽  
Strain Behavior ◽  
Heat Treated

In the present study, nickel phosphorous alloys (Ni-P) and Ni-P/ silicon carbide (SiC) nanocomposite coatings were deposited by electrodeposition on steel substrates in order for their microstructural properties to be assessed while using SEM, XRD, and three-dimensional (3D) profilometry as well as nanoindentation. The amorphisation of the as-plated coatings was observed in all cases, whereas subsequent heat treatment induced crystallization and Ni3P intermetallic phase precipitation. Examination of the surface topology revealed that the surface roughness follows the deposition characteristics and heat treatment induced microstructural changes. Additionally, substantial improvements in mechanical properties, including hardness, yield stress, and elasticity modulus, were obtained for the Ni-P, Ni-P/SiC nanocomposites when heat treated as seen from the nanoindentation results. A Finite Element Analysis (FEA) was developed to simulate the nanoindentation tests that enable the precise extraction of the Ni-P and Ni-P/SiC nanocomposite coatings’ stress-strain behavior. It is shown that the correlation between the nanoindentation tests and the computational models was satisfactory, while the stress-strain curves revealed higher yield points for the heat-treated samples.

Sign in / Sign up

Export Citation Format

Share Document