Comparison of Experimental and Numerical Air Temperature Distributions Behind a Cylindrical Volumetric Solar Absorber Module

2007 ◽  
Vol 130 (1) ◽  
Author(s):  
Silvia Palero ◽  
Manuel Romero ◽  
José L. Castillo
Keyword(s):  
Air Temperature ◽  
Radial Distribution ◽  
Current Trend ◽  
Temperature Gradients ◽  
Outlet Temperature ◽  
Recirculation Flow ◽  
Solar Absorber ◽  
Air Temperatures ◽  
Wind Influence ◽  
Solar Receiver

The current trend in volumetric solar receiver technology is to build modular receivers cooled by air (Hitrec I and II, Solair 200kW and 3MW) in order to facilitate the replacement of broken absorber modules (cups) and to simplify the upscaling of the receiver. In addition, the modular designs include an air return circuit to cool down the structure supporting the cups. Usually, the air outlet temperature from each module is characterized by measurements taken from a single thermocouple. However, the air temperature distribution behind the volumetric absorber module is not homogeneous, as it can be seen in some specific tests where several thermocouples were added behind different absorber modules. The radial distribution of outlet air temperatures shows very high temperature gradients. The goal of this work is to explain the inhomogeneous thermal maps behind the metallic absorbers by comparing some experimental results with numerical simulations performed using the computational fluid dynamics FLUENT code. The results show the wind influence over the air recirculation flow and its effects on the outlet air temperature radial distribution. Thus, the simulations suggest different ways to reduce the temperature gradients behind each cup.

Thermal Performances of a High Temperature Air Solar Absorber Based on Compact Heat Exchange Technology

2011 ◽  
Vol 133 (3) ◽  
Author(s):  
B. Grange ◽  
A. Ferrière ◽  
D. Bellard ◽  
M. Vrinat ◽  
R. Couturier ◽  
...  
Keyword(s):  
Energy Efficiency ◽  
Wall Temperature ◽  
Solar Irradiation ◽  
Metallic Surface ◽  
Small Scale ◽  
Maximum Pressure ◽  
Outlet Temperature ◽  
Solar Absorber ◽  
Operation Conditions ◽  
Solar Receiver

In the framework of the French PEGASE project (Production of Electricity by GAs turbine and Solar Energy), CNRS/PROMES laboratory is developing a 4 MWth pressurized air solar receiver with a surface absorber based on a compact heat exchanger technology. The first step of this development consists in designing and testing a pilot scale (1/10 scale, e.g., 360 kWth) solar receiver based on a metallic surface absorber. This paper briefly presents the hydraulic and thermal performances of the innovative pressurized air solar absorber developed in a previous work. The goal is to be capable of preheating pressurized air from 350 °C at the inlet to 750 °C at the outlet, with a maximum pressure drop of 300 mbar. The receiver is a cavity of square aperture 120 cm × 120 cm and 1 m deepness with an average concentration in the aperture of more than 300. The square shaped aperture is chosen due to the small scale of the receiver; indeed, the performances are not enhanced that much with a round aperture, while the manufacturability is much more complicated. However in the perspective of PEGASE, a round aperture is likely to be used. The back of the cavity is covered by modules arranged in two series making the modular and multistage absorber. The thermal performances of one module are considered to simulate the thermal exchange within the receiver and to estimate the energy efficiency of this receiver. The results of the simulation show that the basic design yields an air outlet temperature of 739 °C under design operation conditions (1000 W/m2 solar irradiation, 0.8 kg/s air flow rate). Using the cavity walls as air preheating elements allows increasing the air outlet temperature above 750 °C as well as the energy efficiency up to 81% but at the cost of a critical absorber wall temperature. However, this wall temperature can be controlled by applying an aiming point strategy with the heliostat field.

AGRICULTURAL METEOROLOGY: CORRELATION OF AIR TEMPERATURES IN CENTRAL AND SOUTHERN ALBERTA AND SASKATCHEWAN WITH LATITUDE, LONGITUDE AND ALTITUDE

1938 ◽  
Vol 16c (1) ◽  
pp. 16-26 ◽  
Author(s):  
J. W. Hopkins
Keyword(s):  
Air Temperature ◽  
Local Variation ◽  
Temperature Gradients ◽  
Regression Coefficients ◽  
Regression Equations ◽  
Partial Regression ◽  
Air Temperatures ◽  
Southern Alberta ◽  
Different Seasons ◽  
Agricultural Meteorology

Linear partial regression coefficients of the 18-year average (1917–34) monthly mean air temperature recorded at 43 points in central and southern Alberta and Saskatchewan on latitude, longitude, and altitude were determined for each month of the year. The three series of coefficients each show an independent seasonal trend. The decrease in air temperature with altitude is greatest in summer and least in winter, whereas the gradient associated with longitude is most pronounced in winter and least in evidence in summer. The influence of latitude is likewise most pronounced in winter, but shows two minima, in spring and autumn respectively. The monthly regression equations account for most of the variance of the station averages, and hence provide a reasonably satisfactory graduation of the climatological temperature gradients characteristic of this area at different seasons of the year.These regression equations could not, however, be applied satisfactorily to the monthly averages for individual years, owing to greater local variation. Additional equations were therefore determined from the records for 1935 at 27 stations in the sub-area bounded by the 50th and 52nd parallels and the 104th and 108th meridians. The results suggest that further additions to the number of stations would still be desirable, and that if this was effected a fairly accurate graduation should be possible within this district, even in individual years.

On the dynamics of distribution of the American White Butterfly, Hyphantria cunea Drury, 1973 (Lepidoptera, Arctiidae), in Ukraine regarding the annual minimal air temperatures

2018 ◽  
Vol 14 (1) ◽  
pp. 44-57
Author(s):  
S. N. Shumov
Keyword(s):  
Air Temperature ◽  
Annual Reports ◽  
Complete Elimination ◽  
Hyphantria Cunea ◽  
White American ◽  
Gis Technologies ◽  
Data Analyses ◽  
Air Temperatures ◽  
Negative Temperatures

The spatial analysis of distribution and quantity of Hyphantria cunea Drury, 1973 across Ukraine since 1952 till 2016 regarding the values of annual absolute temperatures of ground air is performed using the Gis-technologies. The long-term pest dissemination data (Annual reports…, 1951–1985; Surveys of the distribution of quarantine pests ..., 1986–2017) and meteorological information (Meteorological Yearbooks of air temperature the surface layer of the atmosphere in Ukraine for the period 1951-2016; Branch State of the Hydrometeorological Service at the Central Geophysical Observatory of the Ministry for Emergencies) were used in the present research. The values of boundary negative temperatures of winter diapause of Hyphantria cunea, that unable the development of species’ subsequent generation, are received. Data analyses suggests almost complete elimination of winter diapausing individuals of White American Butterfly (especially pupae) under the air temperature of −32°С. Because of arising questions on the time of action of absolute minimal air temperatures, it is necessary to ascertain the boundary negative temperatures of winter diapause for White American Butterfly. It is also necessary to perform the more detailed research of a corresponding biological material with application to the freezing technics, giving temperature up to −50°С, with the subsequent analysis of the received results by the punched-analysis.

scholarly journals Heatwaves and Summer Urban Heat Islands: A Daily Cycle Approach to Unveil the Urban Thermal Signal Changes in Lisbon, Portugal

Atmosphere ◽  
2021 ◽  
Vol 12 (3) ◽  
pp. 292 ◽  
Author(s):  
Ana Oliveira ◽  
António Lopes ◽  
Ezequiel Correia ◽  
Samuel Niza ◽  
Amílcar Soares
Keyword(s):  
Climate Change ◽  
Air Temperature ◽  
Wind Direction ◽  
Urban Heat Islands ◽  
Daily Cycle ◽  
Local Climate ◽  
Thermal Signal ◽  
Air Temperatures ◽  
Local Climate Change ◽  
Urban Heat

Lisbon is a European Mediterranean city, greatly exposed to heatwaves (HW), according to recent trends and climate change prospects. Considering the Atlantic influence, air temperature observations from Lisbon’s mesoscale network are used to investigate the interactions between background weather and the urban thermal signal (UTS) in summer. Days are classified according to the prevailing regional wind direction, and hourly UTS is compared between HW and non-HW conditions. Northern-wind days predominate, revealing greater maximum air temperatures (up to 40 °C) and greater thermal amplitudes (approximately 10 °C), and account for 37 out of 49 HW days; southern-wind days have milder temperatures, and no HWs occur. Results show that the wind direction groups are significantly different. While southern-wind days have minor UTS variations, northern-wind days have a consistent UTS daily cycle: a diurnal urban cooling island (UCI) (often lower than –1.0 °C), a late afternoon peak urban heat island (UHI) (occasionally surpassing 4.0 °C), and a stable nocturnal UHI (1.5 °C median intensity). UHI/UCI intensities are not significantly different between HW and non-HW conditions, although the synoptic influence is noted. Results indicate that, in Lisbon, the UHI intensity does not increase during HW events, although it is significantly affected by wind. As such, local climate change adaptation strategies must be based on scenarios that account for the synergies between potential changes in regional air temperature and wind.

scholarly journals Aiming Strategy on a Prototype-Scale Solar Receiver: Coupling of Tabu Search, Ray-Tracing and Thermal Models

2021 ◽  
Vol 13 (7) ◽  
pp. 3920
Author(s):  
Benjamin Grange ◽  
Gilles Flamant
Keyword(s):  
Tabu Search ◽  
Ray Tracing ◽  
Wall Temperature ◽  
Gradual Increase ◽  
Particle Temperature ◽  
Outlet Temperature ◽  
Operation Conditions ◽  
Start Up ◽  
Fluidized Particle ◽  
Solar Receiver

An aiming point strategy applied to a prototype-scale power tower is analyzed in this paper to define the operation conditions and to preserve the lifetime of the solar receiver developed in the framework of the Next-commercial solar power (CSP) H2020 project. This innovative solar receiver involves the fluidized particle-in-tube concept. The aiming solution is compared to the case without the aiming strategy. Due to the complex tubular geometry of the receiver, results of the Tabu search for the aiming point strategy are combined with a ray-tracing software, and these results are then coupled with a simplified thermal model of the receiver to evaluate its performance. Daily and hourly aiming strategies are compared, and different objective normalized flux distributions are applied to quantify their influence on the receiver wall temperature distribution, thermal efficiency and particle outlet temperature. A gradual increase in the solar incident power on the receiver is analyzed in order to keep a uniform outlet particle temperature during the start-up. Results show that a tradeoff must be respected between wall temperature and particle outlet temperature.

Effects of Air Temperature on Combustion Characteristics of LPG Diffusion Flame

2020 ◽  
Vol 1008 ◽  
pp. 128-138
Author(s):  
Ahmed M. Salman ◽  
Ibrahim A. Ibrahim ◽  
Hamada M. Gad ◽  
Tharwat M. Farag
Keyword(s):  
Air Temperature ◽  
Diffusion Flame ◽  
Nitrogen Addition ◽  
Flame Length ◽  
Combustion Characteristics ◽  
Operating Conditions ◽  
Low Oxygen ◽  
Air Temperatures ◽  
Air Stream ◽  
Wide Range

In the present study, the combustion characteristics of LPG gaseous fuel diffusion flame at elevated air temperatures were experimentally investigated. An experimental test rig was manufactured to examine a wide range of operating conditions. The investigated parameters are the air temperatures of 300, 350, 400, 450, and 500 K with constant percentage of nitrogen addition in combustion air stream of 5 % to give low oxygen concentration of 18.3 % by mass at constant air swirl number, air to fuel mass ratio, and thermal load of 1.5, 30, and 23 kW, respectively. The gaseous combustion characteristics were represented as axial and radial temperatures distributions, temperatures gradient, visible flame length and species concentrations. The results indicated that as the air temperature increased, the chemical reaction rate increased and flame volume decreased, the combustion time reduced leading to a reduction in flame length. The NO concentration reaches its maximum values near the location of the maximum centerline axial temperature. Increasing the combustion air temperature by 200 K, the NO consequently O2 concentrations are increased by about % 355 and 20 % respectively, while CO2 and CO concentrations are decreased by about % 21 and 99 % respectively, at the combustor end.

scholarly journals Quantifying the Independent Influences of Land Cover and Humidity on Microscale Urban Air Temperature Variation in Hot Summer: Methods of Path Analysis and Genetic SVR

Atmosphere ◽  
2020 ◽  
Vol 11 (12) ◽  
pp. 1377
Author(s):  
Weifang Shi ◽  
Nan Wang ◽  
Aixuan Xin ◽  
Linglan Liu ◽  
Jiaqi Hou ◽  
...  
Keyword(s):  
Relative Humidity ◽  
Land Cover ◽  
Path Analysis ◽  
Temperature Variation ◽  
Direct Effect ◽  
Air Temperature ◽  
Urban Areas ◽  
Support Vector ◽  
Urban Air ◽  
Air Temperatures

Mitigating high air temperatures and heat waves is vital for decreasing air pollution and protecting public health. To improve understanding of microscale urban air temperature variation, this paper performed measurements of air temperature and relative humidity in a field of Wuhan City in the afternoon of hot summer days, and used path analysis and genetic support vector regression (SVR) to quantify the independent influences of land cover and humidity on air temperature variation. The path analysis shows that most effect of the land cover is mediated through relative humidity difference, more than four times as much as the direct effect, and that the direct effect of relative humidity difference is nearly six times that of land cover, even larger than the total effect of the land cover. The SVR simulation illustrates that land cover and relative humidity independently contribute 16.3% and 83.7%, on average, to the rise of the air temperature over the land without vegetation in the study site. An alternative strategy of increasing the humidity artificially is proposed to reduce high air temperatures in urban areas. The study would provide scientific support for the regulation of the microclimate and the mitigation of the high air temperature in urban areas.

scholarly journals Variations of indicative dates of ice regime on Lake Onego based on ground air temperature

2019 ◽  
Vol 10 (1) ◽  
Author(s):  
Vyacheslav N. Baklagin
Keyword(s):  
Air Temperature ◽  
Regression Equations ◽  
Early Formation ◽  
Air Temperatures ◽  
Ice Regime ◽  
Break Up ◽  
Ice Period ◽  
Ice Phenomena

The paper shows the changes in the dates (complete freeze-up, ±5 days/°C and complete ice clearance, ±3 days/°C) of the ice regime in Lake Onego depending on changes in average air temperature within the preceding two-month periods (autumn and spring). The regression equations for their calculation based on previous three- and four-month periods according to the 2000-2018 data are also provided. Indicative dates of ice regime based on accumulated air temperatures within the ice period of Lake Onego were also established (early formation of ice phenomena, complete freeze-up phase, beginning of the break-up phase and complete ice clearance). Together with the data on expected air temperature above the lake’s surface, these dependencies enable us to predict the indicative dates of the ice regime.

Optimization of Data Center Room Layout to Minimize Rack Inlet Air Temperature

2005 ◽  
Author(s):  
Siddharth Bhopte ◽  
Dereje Agonafer ◽  
Roger Schmidt ◽  
Bahgat Sammakia
Keyword(s):  
Design Optimization ◽  
Air Temperature ◽  
Data Center ◽  
Floor Tile ◽  
Optimization Approach ◽  
Wrong Decision ◽  
Air Temperatures ◽  
Variable Approach ◽  
Entire Height ◽  
Facility Manager

In a typical raised floor data center with alternating hot and cold aisles, air enters the front of each rack over the entire height of the rack. Since the heat loads of data processing equipment continues to increase at a rapid rate, it is a challenge to maintain the temperature within the requirements as stated for all the racks within the data center. A facility manager has discretion in deciding the data center room layout, but a wrong decision will eventually lead to equipment failure. There are many complex decisions to be made early in the design as the data center evolves. Challenges occur such as optimizing the raised floor plenum, floor tile placement, minimizing the data center local hot spots etc. These adjustments in configuration affects rack inlet air temperatures which is one of the important key to effective thermal management. In this paper, a raised floor data center with 4.5 kW racks is considered. There are four rows of racks with alternating hot and cold aisle arrangement. Each row has six racks installed. Two CRAC units supply chilled air to the data center through the pressurized plenum. Effect of plenum depth, floor tile placement and ceiling height on the rack inlet air temperature is discussed. Plots will be presented over the defined range. Now a multi-variable approach to optimize data center room layout to minimize the rack inlet air temperature is proposed. Significant improvement over the initial model is shown by using multi-variable design optimization approach. The results of multi-variable design optimization are used to present guidelines for optimal data center performance.

scholarly journals Changes in Frequency of Precipitation Types Associated with Surface Air Temperature over Northern Eurasia during 1936–90

2008 ◽  
Vol 21 (22) ◽  
pp. 5807-5819 ◽  
Author(s):  
Hengchun Ye
Keyword(s):  
Air Temperature ◽  
High Latitude ◽  
Surface Air Temperature ◽  
Northern Eurasia ◽  
Precipitation Frequency ◽  
Warming Climate ◽  
Air Temperatures ◽  
Threshold Temperatures ◽  
Hydrological Cycles ◽  
Former Ussr

Abstract Potential benefits or disadvantages of increasing precipitation in high-latitude regions under a warming climate are dependent on how and in what form the precipitation occurs. Precipitation frequency and type are equally as important as quantity and intensity to understanding the seasonality of hydrological cycles and the health of the ecosystem in high-latitude regions. This study uses daily historical synoptic observation records during 1936–90 over the former USSR to reveal associations between the frequency of precipitation types (rainfall, snowfall, mixed solid and liquid, and wet days of all types) and surface air temperatures to determine potential changes in precipitation characteristics under a warming climate. Results from this particular study show that the frequency of precipitation of all types generally increases with air temperature during winter. However, both solid and liquid precipitation days predominantly decrease with air temperature during spring with a reduction in snowfall days being most significant. During autumn, snowfall days decrease while rainfall days increase resulting in overall decreases in wet days as air temperature increases. The data also reveal that, as snowfall days increase in relationship to increasing air temperatures, this increase may level out or even decrease as mean surface air temperature exceeds −8°C in winter. In spring and autumn, increasing rainfall days switch to decreasing when the mean surface air temperature goes above 6°C. The conclusion of this study is that changes in the frequency of precipitation types are highly dependent on the location’s air temperature and that threshold temperatures exist beyond which changes in an opposite direction occur.

Sign in / Sign up

Export Citation Format

Share Document