Maximizing Solder Joint Reliability Through Optimal Shape Design

1997 ◽  
Vol 119 (3) ◽  
pp. 149-155 ◽  
Author(s):  
A. M. Deshpande ◽  
G. Subbarayan ◽  
R. L. Mahajan
Keyword(s):  
Fatigue Life ◽  
Solder Joint ◽  
Numerical Optimization ◽  
Solder Joints ◽  
Optimization Techniques ◽  
Approximation Schemes ◽  
Design Parameters ◽  
Electronic Packages ◽  
Considerable Difficulty ◽  
Plastic Ball

The automated search techniques from the field of numerical optimization provide tools that enable optimal design of electronic packages in general, and solder joints in particular. However, there is considerable difficulty in using these procedures for solder joints since the estimation of fatigue life is computationally very expensive. In this paper, global approximation schemes based on designed experiments, linear regression models, and artificial neural network models are developed to approximate the fatigue life as a function of solder joint design parameters. Since these approximate surfaces are inexpensive to evaluate, their use with the numerical optimization techniques leads to a computationally efficient method for optimizing electronic packages. The developed techniques are demonstrated using the 225 I/O Plastic Ball Grid Array (PBGA) package, manufactured by Motorola, Inc. An exact optimization of the solder joints (without approximations) is also carried out and used as a basis for comparing the accuracy and efficiency of the developed methods.

scholarly journals Prediction of mechanical properties and fatigue life of nano silver paste in chip interconnection

2020 ◽  
Author(s):  
Hui YANG ◽  
Jihui Wu
Keyword(s):  
Fatigue Life ◽  
Solder Joint ◽  
Thermal Cycling ◽  
Solder Joints ◽  
Stress And Strain ◽  
Nano Silver ◽  
Finite Element Software ◽  
Flip Chips ◽  
Empirical Correction ◽  
Prediction Of Mechanical Properties

Abstract The simulation of nano-silver solder joints in flip-chips is performed by the finite element software ANSYS, and the stress-strain distribution results of the solder joints are displayed. In this simulation, the solder joints use Anand viscoplastic constitutive model, which can reasonably simulate the stress and strain of solder joints under thermal cycling load. At the same time this model has been embedded in ANSYS software, so it is more convenient to use. The final simulation results show that the areas where the maximum stresses and strains occur at the solder joints are mostly distributed in the contact areas between the solder joints and the copper pillars and at the solder joints. During the entire thermal cycling load process, the area where the maximum change in stress and strain occurs is always at the solder joint, and when the temperature changes, the temperature at the solder joint changes significantly. Based on comprehensive analysis, the relevant empirical correction calculation equation is used to calculate and predict the thermal fatigue life of nano-silver solder joints. The analysis results provide a reference for the application of nano-silver solder in the electronic packaging industry.

Effect of Micro Structure on Fatigue Characteristics of Lead Free Solder Joints

2011 ◽  
Author(s):  
Takahiro Akutsu ◽  
Qiang Yu
Keyword(s):  
Grain Size ◽  
Fatigue Crack ◽  
Fatigue Life ◽  
Solder Joint ◽  
Crack Propagation ◽  
Solder Joints ◽  
Lead Free ◽  
Lead Free Solder ◽  
Micro Structure ◽  
Free Solder

This paper presents the influence of the micro structure on the crack propagation in lead free solder joint. The author’s group have studied the Manson-Coffin’s law for lead free solder joint by using the isothermal fatigue test and FEM analytical approaches to establish the practicable evaluation of thermal fatigue life of solder joints, for example, for the Sn-Cu-Ni solder, because this solder is attracted from the aspect of the decrease of solder leach in the flow process and material cost. However, even if the same loading is given to the solder joints of BGA test piece, there was a large dispersion in the fatigue life. Even though the effect of the shape difference has been considered, the range of the dispersion could not been explained sufficiently. In the study, the fatigue crack propagation modes in the solder joints were investigated, and an internal fatigue crack mode and an interfacial fatigue crack mode were confirmed. And the tendency of a shorter on fatigue life in the interfacial fatigue mode was confirmed. To clarify the mechanism of these fatigue crack modes, the crystal grain size in the solder joints was investigated before the fatigue test and also after the test. Furthermore, the verification of the mechanism using FEM models considering the crystal grain size was carried out. First of all, each element in FEM models matching to the average crystal grain size was made. Second, the inelastic strain ranges in each FEM models were studied. As a result, it was shown that the influence of the crude density of the crystal grain to the fatigue crack progress can be evaluated. In addition, the micro structure of the solder joint of large-scale electronic devices is observed, and FEM model was made based on the observation result. As a result, it was shown that the influence of the directionality with the crystal grain to the fatigue crack progress can be evaluated.

scholarly journals Experimental Study on the Reliability of PBGA Electronic Packaging under Shock Loading

Electronics ◽  
2019 ◽  
Vol 8 (3) ◽  
pp. 279 ◽  
Author(s):  
Jiang Shao ◽  
Hongjian Zhang ◽  
Bo Chen
Keyword(s):  
Fatigue Life ◽  
Electronic Packaging ◽  
Failure Modes ◽  
Solder Joints ◽  
Optical Microscope ◽  
Micro Cracks ◽  
Plastic Ball ◽  
Plastic Ball Grid Array ◽  
Aeronautical Industry ◽  
The Relationship

Plastic Ball Grid Array (PBGA) one of the most important electronic packaging methods, is widely used in aeronautical industry field. According to the JEDEC standard, shock tests of PBGA assemblies are conducted under different loading conditions. Several important parameters, such as the fatigue life of PBGA assemblies, the relationship between solder joint positions and fatigue life, the relationship between strain energy density and fatigue life, are analyzed based on experiment results. The failure modes of PBGA assemblies are studied by optical microscope (OM). The results show that during the shock tests, the strains of the solder joints near the center of the specimen are larger than other positions, and these solder joints are prone to form micro cracks. With the increase of the shock times, these micro cracks extend rapidly which will eventually cause the failure of the PBGA electronic packaging.

Thermomechanical Analysis of Solder Joints Under Thermal and Vibrational Loading

2001 ◽  
Vol 124 (1) ◽  
pp. 60-66 ◽  
Author(s):  
Cemal Basaran ◽  
Rumpa Chandaroy
Keyword(s):  
Finite Element ◽  
Fatigue Life ◽  
Solder Joint ◽  
Constitutive Model ◽  
Solder Joints ◽  
Cycle Fatigue ◽  
Simultaneous Application ◽  
Short Cycle ◽  
Finite Element Procedure ◽  
Life Predictions

Due to the coefficient of thermal expansion (CTE) mismatch between the bonded layers, the solder joint experiences cycling shear strain, which leads to short cycle fatigue. When semiconductor devices are used in a vibrating environment, additional strains shorten the fatigue life of a solder joint. Reliability of these joints in new packages is determined by laboratory tests. In order to use the FEM to replace these expensive reliability tests a unified constitutive model for Pb40/Sn60 solder joints has been developed and implemented in a thermo-viscoplastic-dynamic finite element procedure. The model incorporates thermal-elastic-viscoplastic and damage capabilities in a unified manner. The constitutive model has been verified extensively against laboratory test data. The finite element procedure was used for coupled thermo-viscoplastic-dynamic analyses for fatigue life predictions. The results indicate that using Miner’s rule to calculate accumulative damage by means of two separate analyses, namely dynamic and thermo-mechanical, significantly underestimates the accumulative total damage. It is also shown that a simultaneous application of thermal and dynamic loads significantly shortens the fatigue life of the solder joint. In the microelectronic packaging industry it is common practice to ignore the contribution of vibrations to short cycle fatigue life predictions. The results of this study indicate that damage induced in the solder joints by vibrations have to be included in fatigue life predictions to accurately estimate their reliability.

Solder Joint Reliability — Design Implications From Finite Element Modeling and Experimental Testing

1990 ◽  
Vol 112 (2) ◽  
pp. 135-146 ◽  
Author(s):  
H. K. Charles ◽  
G. V. Clatterbaugh
Keyword(s):  
Fracture Toughness ◽  
Finite Element ◽  
Fatigue Life ◽  
Solder Joint ◽  
Solder Joints ◽  
Experimental Testing ◽  
Sectional Area ◽  
Stress Concentrations ◽  
Cross Sectional ◽  
Power Cycling

An extensive finite element modeling and experimental testing program has been carried out to determine the most optimum design parameters for solder joints in surface mount applications. Although the analysis and testing (power cycling and thermal cycling) has been carried out for a variety of package styles, particular attention will be paid to the result for leadless ceramic chip carriers. This package is particularly useful in certain high performance military and commercial applications. Analysis and experimentation indicate that increased fatigue life under power cycling can be attained by fabricating solder joints with large fillets and low standoff heights. The large fillet geometry significantly reduces harmful stress concentrations while increasing the net cross-sectional area within the joint. Both factors tend to improve the fracture toughness of the joint. The temperature and frequency dependencies of solder joint fatigue life under power cycling testing is discussed. The observed frequency dependence can be minimized by eliminating harmful tensile strain components thus reducing harmful stress relaxation and tensile induced oxygen embrittlement of grain boundaries. Temperature cycling studies indicate joints with slightly higher standoffs and low fillet angles are more resistant to cyclic fatigue than pillar type joints which tend to focus shear strains at the interfaces. Solder joints can be tapered to improve overall reliability but, in most cases, tapering will provide only a small increase in fracture toughness of the joint through the elimination of stress concentrations. Additional fatigue life increases can be obtained only through an enlargement of the joint cross-sectional area. Aspects of the above results will be presented in detail along with design guidelines for creating high reliability solder joints for various application scenarios.

Sign in / Sign up

Export Citation Format

Share Document