Computational Analysis of a Inverted Double-Element Airfoil in Ground Effect

2006 ◽  
Vol 128 (6) ◽  
pp. 1172-1180 ◽  
Author(s):  
Stephen Mahon ◽  
Xin Zhang
Keyword(s):  
Flow Field ◽  
Stokes Equations ◽  
Near Field ◽  
Turbulence Models ◽  
Ground Effect ◽  
Wake Flow ◽  
Navier Stokes ◽  
Main Element ◽  
Ride Height ◽  
Navier Stokes Equations

The flow around an inverted double-element airfoil in ground effect was studied numerically, by solving the Reynolds averaged Navier-Stokes equations. The predictive capabilities of six turbulence models with regards to the surface pressures, wake flow field, and sectional forces were quantified. The realizable k−ε model was found to offer improved predictions of the surface pressures and wake flow field. A number of ride heights were investigated, covering various force regions. The surface pressures, sectional forces, and wake flow field were all modeled accurately and offered improvements over previous numerical investigations. The sectional forces indicated that the main element generated the majority of the downforce, whereas the flap generated the majority of the drag. The near field and far field wake development was investigated and suggestions concerning reduction of the wake thickness were offered. The main element wake was found to greatly contribute to the overall wake thickness with the contribution increasing as the ride height decreased.

Computational Analysis of Pressure and Wake Characteristics of an Aerofoil in Ground Effect

2004 ◽  
Vol 127 (2) ◽  
pp. 290-298 ◽  
Author(s):  
Stephen Mahon ◽  
Xin Zhang
Keyword(s):  
Flow Field ◽  
Surface Pressure ◽  
Stokes Equations ◽  
Turbulence Models ◽  
Ground Effect ◽  
Wake Flow ◽  
Suction Surface ◽  
Ride Height ◽  
Surface Pressure Distribution ◽  
Wake Characteristics

The pressure and wake of an inverted cambered aerofoil in ground effect was studied numerically by solving the Reynolds-averaged Navier-Stokes equations. Efforts were focused on the setting up of an accurate numerical model and assessing the abilities of various turbulence models in capturing major physical features associated with the flow, such as surface pressure distribution, separation, level of downforce, and wake. A number of ride heights were studied covering various force regions. Surface pressures, sectional forces, and wake characteristics were compared to experimental data. The k−ω SST and Realizable k−ε turbulence models were found to offer good overall simulations, with the k−ω SST performing better for the surface pressure and the Realizable k−ε better for the wake. The simulations at various ride heights correctly captured the trends in flow-field variations with ride height. The surface pressures, wake flow field, and region of separation on the suction surface of the aerofoil, at lower ride heights, were all modeled accurately.

Aerodynamics of a two-dimensional flapping wing hovering in proximity of ground

2019 ◽  
Vol 233 (12) ◽  
pp. 4316-4332 ◽  
Author(s):  
Yunlong Zheng ◽  
Qiulin Qu ◽  
Peiqing Liu ◽  
Yunpeng Qin ◽  
Ramesh K Agarwal
Keyword(s):  
Flow Field ◽  
Stokes Equations ◽  
Aerodynamic Force ◽  
Ground Effect ◽  
Flapping Wing ◽  
Navier Stokes ◽  
Two Dimensional ◽  
Navier Stokes Equations ◽  
Lift Mechanism ◽  
The Difference

The difference in aerodynamic forces of a two-dimensional flapping wing hovering in unbounded flow field and ground effect is studied. The unsteady laminar Navier–Stokes equations are solved by the finite volume method to simulate the flow field around the wing. In the unbounded flow field, the correspondence between the aerodynamic force, pressure distribution on wing, and typical vortex structures is established, and then the high-lift mechanism of the flapping wing is further explained. In the ground effect, based on the lift variation, the dimensionless height H/ C ( H is the height of the wing above ground and C is the chord length of the wing) can be divided into transition and ground effect regimes. In the transition regime ( H/ C > 2.5), the lift decreases with the decreasing height, and the ground indirectly impacts the vortices near wing by changing the shed vortices in space. In the ground effect regime ( H/ C < 2.5), the lift increases with the decreasing height, and the ground directly impacts the vortices near the wing.

On the Flow Fields of Inertial Impactors

1974 ◽  
Vol 96 (4) ◽  
pp. 394-400 ◽  
Author(s):  
V. A. Marple ◽  
B. Y. H. Liu ◽  
K. T. Whitby
Keyword(s):  
Flow Field ◽  
Stokes Equations ◽  
Relaxation Method ◽  
Water Model ◽  
Navier Stokes ◽  
Visualization Technique ◽  
Navier Stokes Equations ◽  
Theoretical Results ◽  
Plate Distance ◽  
Good Agreement

The flow field in an inertial impactor was studied experimentally with a water model by means of a flow visualization technique. The influence of such parameters as Reynolds number and jet-to-plate distance on the flow field was determined. The Navier-Stokes equations describing the laminar flow field in the impactor were solved numerically by means of a finite difference relaxation method. The theoretical results were found to be in good agreement with the empirical observations made with the water model.

Fluid flow over and through a regular bundle of rigid fibres

2016 ◽  
Vol 792 ◽  
pp. 5-35 ◽  
Author(s):  
Giuseppe A. Zampogna ◽  
Alessandro Bottaro
Keyword(s):  
Porous Medium ◽  
Fluid Flow ◽  
Flow Field ◽  
Stokes Equations ◽  
Transversely Isotropic ◽  
Navier Stokes ◽  
Leading Order ◽  
Macroscopic Scale ◽  
Navier Stokes Equations ◽  
Homogenized Model

The interaction between a fluid flow and a transversely isotropic porous medium is described. A homogenized model is used to treat the flow field in the porous region, and different interface conditions, needed to match solutions at the boundary between the pure fluid and the porous regions, are evaluated. Two problems in different flow regimes (laminar and turbulent) are considered to validate the system, which includes inertia in the leading-order equations for the permeability tensor through a Oseen approximation. The components of the permeability, which characterize microscopically the porous medium and determine the flow field at the macroscopic scale, are reasonably well estimated by the theory, both in the laminar and the turbulent case. This is demonstrated by comparing the model’s results to both experimental measurements and direct numerical simulations of the Navier–Stokes equations which resolve the flow also through the pores of the medium.

Aerodynamic ground effects on DLRF6 vehicle

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Mojtaba Tahani ◽  
Mehran Masdari ◽  
Ali Bargestan
Keyword(s):  
Stokes Equations ◽  
Ground Effect ◽  
Longitudinal Direction ◽  
Propulsion System ◽  
Navier Stokes ◽  
Noticeable Effect ◽  
Navier Stokes Equations ◽  
Vehicle Performance ◽  
Content Type ◽  
Logical Connection

Purpose The overall performance of an aerial vehicle strongly depends on the specifics of the propulsion system and its position relative to the other components. The purpose of paper is this factor can be characterized by changing several contributing parameters, such as distance from the ground, fuselage and wing as well as the nacelle outlet velocity and analyzing the aerodynamic performance. Design/methodology/approach Navier–Stokes equations are discretized in space using finite volume method. A KW-SST model is implemented to model the turbulence. The flow is assumed steady, single-phase, viscous, Newtonian and compressible. Accordingly, after validation and verification against experimental and numerical results of DLRF6 configuration, the location of the propulsion system relative to configuration body is examined. Findings At the nacelle outlet velocity of V/Vinf = 4, the optimal location identified in this study delivers 16% larger lift to drag ratio compared to the baseline configuration. Practical implications Altering the position of the propulsion system along the longitudinal direction does not have a noticeable effect on the vehicle performance. Originality/value Aerial vehicles including wing-in-ground effect vehicles require thrust to fly. Generating this necessary thrust for motion and acceleration is thoroughly affected by the vehicle aerodynamics. There is a lack of rigorous understanding of such topics owing to the immaturity of science in this area. Complexity and diversity of performance variables for a numerical solution and finding a logical connection between these parameters are among the related challenges.

Simulation of Acoustic Streaming in a Resonator

2004 ◽  
Author(s):  
Bakhtier Farouk ◽  
Murat K. Aktas
Keyword(s):  
Flow Field ◽  
Standing Wave ◽  
Oscillatory Flow ◽  
Stokes Equations ◽  
Acoustic Streaming ◽  
Flow Patterns ◽  
Vortical Flow ◽  
Navier Stokes ◽  
Navier Stokes Equations ◽  
Streaming Flow

Formation of vortical flow structures in a rectangular enclosure due to acoustic streaming is investigated numerically. The oscillatory flow field in the enclosure is created by the vibration of a vertical side wall of the enclosure. The frequency of the wall vibration is chosen such that a standing wave forms in the enclosure. The interaction of this standing wave with the horizontal solid walls leads to the production of Rayleigh type acoustic streaming flow patterns in the enclosure. All four walls of the enclosure considered are thermally insulated. The fully compressible form of the Navier-Stokes equations is considered and an explicit time-marching algorithm is used to explicitly track the acoustic waves. Numerical solutions are obtained by employing a highly accurate flux corrected transport (FCT) algorithm for the convection terms. A time-splitting technique is used to couple the viscous and diffusion terms of the full Navier-Stokes equations. Non-uniform grid structure is employed in the computations. The simulation of the primary oscillatory flow and the secondary (steady) streaming flows in the enclosure is performed. Streaming flow patterns are obtained by time averaging the primary oscillatory flow velocity distributions. The effect of the amount of wall displacement on the formation of the oscillatory flow field and the streaming structures are studied. Computations indicate that the nonlinearity of the acoustic field increases with increasing amount of the vibration amplitude. The form and the strength of the secondary flow associated with the oscillatory flow field and viscous effects are found to be strongly correlated to the maximum displacement of the vibrating wall. Total number of acoustic streaming cells per wavelength is also determined by the strength and the level of the nonlinearity of the sound field in the resonator.

An efficient method for predicting zero-lift or boundary-layer drag including aeroelastic effects for the design environment

2015 ◽  
Vol 119 (1221) ◽  
pp. 1451-1460
Author(s):  
J. A. Camberos ◽  
R. M. Kolonay ◽  
F. E. Eastep ◽  
R. F. Taylor
Keyword(s):  
Boundary Layer ◽  
Stokes Equations ◽  
Near Field ◽  
Field Method ◽  
Navier Stokes ◽  
Spanwise Direction ◽  
Design Environment ◽  
Navier Stokes Equations ◽  
Induced Drag ◽  
Flight Regimes

AbstractOne of the aerospace design engineer’s goals aims to reduce drag for increased aircraft performance, in terms of range, endurance, or speed in the various flight regimes. To accomplish this, the designer must have rapid and accurate techniques for computing drag. At subsonic Mach numbers drag is primarily a sum of lift-induced drag and zero-lift drag. While lift-induced drag is easily and efficiently determined by a far field method, using the Trefftz plane analysis, the same cannot be said of zero-lift drag. Zero-lift drag (CD,0) usually requires consideration of the Navier-Stokes equations, the solution of which is as yet unknown except by using approximate numerical techniques with computational fluid dynamics (CFD). The approximate calculation of zero-lift drag from CFD is normally computed with so-called near-field techniques, which can be inaccurate and too time consuming for consideration in the design environment. This paper presents a technique to calculate zero-lift and boundary-layer drag in the subsonic regime that includes aeroelastic effects and is suitable for the design environment. The technique loosely couples a two-dimensional aerofoil boundary-layer model with a 3D aeroelastic solver to compute zero-lift drag. We show results for a rectangular wing (baseline), a swept wing, and a tapered wing. Then compare with a rectangular wing with variable thickness and camber, thinning out from the root to tip (spanwise direction), thus demonstrating the practicality of the technique and its utility for rapid conceptual design.

CFD in the Loop: Ensemble Kalman Filtering With Underwater Mobile Sensor Networks

2014 ◽  
Author(s):  
Axel Hackbarth ◽  
Edwin Kreuzer ◽  
Thorben Schröder
Keyword(s):  
Flow Field ◽  
Stokes Equations ◽  
Fluid Dynamic ◽  
Navier Stokes ◽  
Mobile Sensor ◽  
Dynamic Simulations ◽  
Navier Stokes Equations ◽  
Time Flow ◽  
Strong Current ◽  
Predictive Controller

In marine environments, sparse in-situ measurements can be used for the estimation of the fluid dynamic field. To make best use of a mobile sensor network in an environment whose dynamics can be described by the Navier-Stokes equations, we developed a framework for data assimilation with motion-constrained underwater vehicles, that takes the physical field properties into account while sampling. Our algorithm uses an ensemble Kalman filter that propagates hundreds of slightly varied coarse fluid dynamic simulations through time. Flow and scalar measurements from the mobile sensors are integrated into all ensemble members. We implemented a model predictive controller to calculate covariance minimizing paths from the estimated flow field and motion primitives of the vehicles, which are affected by a strong current. Thereby, we were able to indirectly track dynamically changing wall temperatures through measurements of flow field variables.

scholarly journals Numerical and Experimental Investigation of a Supersonic Flow Field around Solid Fuel on an Inclined Flat Plate

2009 ◽  
Vol 2009 ◽  
pp. 1-10 ◽  
Author(s):  
Uzu-Kuei Hsu
Keyword(s):  
Flow Field ◽  
Solid Fuel ◽  
Stokes Equations ◽  
Control Volume ◽  
Navier Stokes ◽  
Navier Stokes Equations ◽  
Short Period ◽  
Volume Method ◽  
Environmental Temperatures ◽  
Gasification Temperature

This research adopts a shock tube 16 meters long and with a 9 cm bore to create a supersonic, high-temperature, and high-pressure flowfield to observe the gasification and ignition of HTPB solid fuel under different environments. Also, full-scale 3D numerical simulation is executed to enhance the comprehension of this complex phenomenon. The CFD (Computational Fluid Dynamics) code is based on the control volume method and the pre-conditioning method for solving the Navier-Stokes equations to simulate the compressible and incompressible coupling problem. In the tests, a HTPB slab is placed in the windowed-test section. Various test conditions generate different supersonic Mach numbers and environmental temperatures. In addition, the incident angles of the HTPB slab were changed relative to the incoming shock wave. Results show that as the Mach number around the slab section exceeded 1.25, the flowfield temperature achieved 1100 K, which is higher than the HTPB gasification temperature (930 K~1090 K). Then, gasification occurred and a short-period ignition could be observed. In particular, when the slab angle was7∘, the phenomenon became more visible. This is due to the flow field temperature increase when the slab angle was at7∘.

scholarly journals Numerical and Analytical Study of Fluid Dynamic Forces in Seals and Bearings

1988 ◽  
Vol 110 (3) ◽  
pp. 315-325 ◽  
Author(s):  
L. T. Tam ◽  
A. J. Przekwas ◽  
A. Muszynska ◽  
R. C. Hendricks ◽  
M. J. Braun ◽  
...  
Keyword(s):  
Flow Field ◽  
Stokes Equations ◽  
Fluid Dynamic ◽  
Three Dimensional ◽  
Circumferential Velocity ◽  
Navier Stokes ◽  
Navier Stokes Equations ◽  
Lumped Model ◽  
Destabilizing Factors ◽  
Recirculation Zones

A numerical model based on a transformed, conservative form of the three-dimensional Navier-Stokes equations and an analytical model based on “lumped” fluid parameters are presented and compared with studies of modeled rotor/bearing/seal systems. The rotor destabilizing factors are related to the rotative character of the flow field. It is shown that these destabilizing factors can be reduced through a descrease in the fluid average circumferential velocity. However, the rotative character of the flow field is a complex three-dimensional system with bifurcated secondary flow patterns that significantly alter the fluid circumferential velocity. By transforming the Navier-Stokes equations to those for a rotating observer and using the numerical code PHOENICS-84 with a nonorthogonal body fitted grid, several numerical experiments were carried out to demonstrate the character of this complex flow field. In general, fluid injection and/or preswirl of the flow field opposing the shaft rotation significantly intensified these secondary recirculation zones and thus reduced the average circumferential velocity, while injection or preswirl in the direction of rotation significantly weakened these zones. A decrease in average circumferential velocity was related to an increase in the strength of the recirculation zones and thereby promoted stability. The influence of the axial flow was analyzed. The lumped model of fluid dynamic force based on the average circumferential velocity ratio (as opposed to the bearing/seal coefficient model) well described the obtained results for relatively large but limited ranges of parameters. This lumped model is extremely useful in rotor/bearing/seal system dynamic analysis and should be widely recommended. Fluid dynamic forces and leakage rates were calculated and compared with seal data where the working fluid was bromotrifluoromethane (CBrF3). The radial and tangential force predictions were in reasonable agreement with selected experimental data. Nonsynchronous perturbation provided meaningful information for system lumped parameter identification from numerical experiment data.

Sign in / Sign up

Export Citation Format

Share Document