Theoretical Investigation in Thermoelastohydrodynamic Lubrication With Non-Newtonian Lubricants Under Sudden Load Change

2006 ◽  
Vol 128 (4) ◽  
pp. 771-777 ◽  
Author(s):  
M. Mongkolwongrojn ◽  
C. Aiumpornsin ◽  
K. Thammakosol
Keyword(s):  
Initial Conditions ◽  
Elastohydrodynamic Lubrication ◽  
Solid Particles ◽  
Time Dependent ◽  
Dimensionless Time ◽  
Line Contact ◽  
Heavy Load ◽  
Load Change ◽  
Energy Equations ◽  
Sudden Load

The time-dependent thermal compressible elastohydrodynamic lubrication of a sliding line contact has been developed to investigate the effect of a sudden load change. The time-dependent modified Reynolds equation with non-Newtonian fluids has been formulated using a power law model. Properties of non-Newtonian dilatant fluids for solid-liquid lubricants have been studied experimentally using two common solid particles; namely, molybdenum disulfide and polytetrafluoroethylene. The simultaneous systems of modified Reynolds, elasticity, and energy equations with initial conditions were solved numerically using a multigrid multilevel technique. The performance characteristics of the thermoelastohydrodynamic line contact were presented with varying dimensionless time for the pressure distribution, temperature distribution, and oil film thickness. The transient response of the line contact between two infinitely long cylindrical surfaces was simulated under a heavy step load function. The coefficients of friction were also presented in this work at steady condition with varying particle concentration. This simulation showed a significant effect of solid particles on thermoelastohydrodynamic lubrication under heavy load conditions.

Theoretical Investigation in Thermoelastohydrodynamic Lubrication With Non-Newtonian Lubricants Under Heavy Load Change

2004 ◽  
Author(s):  
Mongkol Mongkolwongrojn ◽  
Kasame Thammakosol
Keyword(s):  
Initial Conditions ◽  
Solid Lubricants ◽  
Solid Particles ◽  
Time Dependent ◽  
Line Contact ◽  
Heavy Load ◽  
Steady State Condition ◽  
Load Change ◽  
Load Function ◽  
Energy Equations

The time-dependent thermal compressible elastohydrodynamic (EHD) lubrication of sliding line contact has been developed to investigate the effect of a sudden load change. The time-dependent modified Reynolds equation with non-Newtonian fluids has been formulated using power law’s model. In this study, the non-Newtonian dilatant fluids for liquids-solid lubricants have been purposed experimentally using the common solid particles namely, Molybdenum disulfide (MoS2) and Polytetrafluoroethylene (PTFE). The simultaneous systems of modified Reynolds and elasticity and energy equations with initial conditions were solved numerically using multigrid multilevel technique. The performance characteristics of the thermoelastohydrodynamic under line contact were presented with varying time for the pressure distribution, temperature distribution and oil film thickness. The transient response of the line contact between two surfaces was simulated under a heavy step load function. The coefficients of friction were also presented in this work at steady state condition with varying particle concentration. This simulation showed a significant effect of liquid-solid on thermoelastohydrodynamic (TEHD) lubrication under heavy load conditions.

Influence of Surface Roughness in TEHL With Non-Newtonian Liquid/Solid Lubricants Under Sudden Load Change

2007 ◽  
Author(s):  
Mongkol Mongkolwongrojn ◽  
Chatchai Aiumpornsin
Keyword(s):  
Surface Roughness ◽  
Initial Conditions ◽  
Harmonic Wave ◽  
Solid Lubricants ◽  
Newtonian Liquid ◽  
Solid Particles ◽  
Cylinder Surface ◽  
Line Contact ◽  
Load Change ◽  
Sudden Load

This paper describes the influence of surface roughness on thermoelastohydrodynamic (TEHL) lubrication characteristics of a sliding line contact under sudden load change. The surface roughness is a harmonic wave in the transverse direction. The time-dependent Reynolds equation with non-Newtonian liquid-solid fluids has been formulated using a power law model. The constitutive equation of the liquid-solid lubricants was formulated based on experimental data. The simultaneous systems of modified Reynolds, elasticity and energy equations with initial conditions were solved numerically. The static and dynamic characteristics of the thermoelastohydrodynamic line contact with rough surfaces under sudden load change have been investigated numerically to determine the distribution of pressure, film thickness and temperature. The transient response of the lubricated line contact between a infinitely long cylinder surface and a flat plate was simulated under a heavy step load function. This simulation showed a significant effect of surface roughness and solid particles on thermoelastohydrodynamic lubrication under sudden load change.

Effects of a Single Bump or Dent in Time Dependent Thermal Line EHD Lubrication

1994 ◽  
Vol 116 (1) ◽  
pp. 9-20 ◽  
Author(s):  
Farshid Sadeghi ◽  
Kyung-Hoon Kim
Keyword(s):  
Film Thickness ◽  
Elastohydrodynamic Lubrication ◽  
Transient Behavior ◽  
Time Dependent ◽  
Line Contact ◽  
Temperature Distributions ◽  
Ehd Lubrication ◽  
Pure Rolling ◽  
Energy Equations ◽  
Thermal Line

A time-dependent thermal compressible elastohydrodynamic lubrication of line contact model has been developed to investigate the effects of a single bump or dent in heavily loaded rolling/sliding contacts. The results illustrate the transient behavior of the film thickness, pressure and temperature distributions as a bump or a dent travels through the contact. The multigrid multilevel technique was used to simultaneously solve the discretized time dependent Reynolds, elasticity and energy equations. The effects of various loads and speeds have been investigated. Results are presented for the nondimensional loads of W = 1.3 × 10−4, 2.3 × 10−4 and nondimensional speeds ranging from U = 1 × 10−11 to U = 10−10 under pure rolling and rolling/sliding conditions.

Effect of Thermal Properties of a Coated Elastohydrodynamic Lubrication Line Contact Under Various Slide-to-Roll Ratios

2017 ◽  
Vol 139 (7) ◽  
Author(s):  
Huaiju Liu ◽  
Caichao Zhu ◽  
Zonglin Gu ◽  
Zhanjiang Wang ◽  
Jinyuan Tang
Keyword(s):  
Mechanical Properties ◽  
Thermal Properties ◽  
Elastohydrodynamic Lubrication ◽  
Temperature Fields ◽  
Line Contact ◽  
Oil Film ◽  
Line Contacts ◽  
Energy Equations ◽  
Thermal Conductivities

A numerical thermal elastohydrodynamic lubrication (EHL) model is developed for coated line contacts by considering both the mechanical properties and the thermal properties of the coating and the substrate. The temperature fields within the oil film and within the solids are solved by deriving the energy equations for the solids and the oil film. Heat continuity conditions are satisfied at the interfaces between the solids and the oil film, and the coating/substrate interfaces. Effects of the slide-to-roll ratio (SR), the thermal conductivities of the coating bodies, and the oil film on temperature fields are studied.

Experimental Investigation for Finite Line Contact Edge Effect of Elastohydrodynamic Lubrication

2012 ◽  
Vol 538-541 ◽  
pp. 1945-1951 ◽  
Author(s):  
Yu Xue ◽  
Tong Shu Hua ◽  
Hao Yang Sun
Keyword(s):  
Experimental Investigation ◽  
Film Thickness ◽  
Contact Area ◽  
Elastohydrodynamic Lubrication ◽  
Line Contact ◽  
Heavy Load ◽  
Entrainment Velocity ◽  
Finite Line Contact ◽  
Finite Line ◽  
Lubricant Viscosity

To reveal the principle of the close effect about the EHL finite roller, contraposing the log-convex roller, the finite line contact EHL film shape and thickness were observed through self-made heavy-load optical EHL experimental device. Experiments were carried out under several different pressure and viscosity, and three groups of interference pictures were obtained under three different entrainment velocities. As the load increased, both the length and width of the roller contact area added, and the width of the contact zone in the end was larger than that in the centre, the close effect was more obvious; when the entrainment velocity and lubricant viscosity increased, the film thickness in the central roller became thicker while the increase in the roller end was little, the high film thickness difference enhanced the close effect. The entrainment velocity, load and lubricant viscosity all have great effect on the EHL characteristics of the finite roller.

Elastohydrodynamic Lubrication of Rough Surfaces Under Oscillatory Line Contact With Non-Newtonian Lubricant

2007 ◽  
Author(s):  
Mongkol Mongkolwongrojn ◽  
Khanittha Wongseedakaew ◽  
Francis E. Kennedy
Keyword(s):  
Surface Roughness ◽  
Film Thickness ◽  
Power Law ◽  
Reynolds Equation ◽  
Initial Conditions ◽  
Rough Surfaces ◽  
Elastohydrodynamic Lubrication ◽  
Oscillatory Motion ◽  
Line Contact ◽  
Minimum Film Thickness

This paper presents the analysis of elastohydrodynamic lubrication (EHL) of two parallel cylinders in line contact with non-Newtonian fluids under oscillatory motion. The effects of transverse harmonic surface roughness are also investigated in the numerical simulation. The time-dependent Reynolds equation uses a power law model for viscosity. The simultaneous system of modified Reynolds equation and elasticity equation with initial conditions was solved using multi-grid multi-level method with full approximation technique. Film thickness and pressure profiles were determined for smooth and rough surfaces in the oscillatory EHL conjunctions, and the film thickness predictions were verified experimentally. For an increase in the applied load on the cylinders, the minimum film thickness calculated numerically becomes smaller. The predicted film thickness is slightly higher than the film thickness obtained experimentally, owing to cavitation that occurred in the experiments. For both hard and soft EHL contacts, the minimum film thickness under oscillatory motion is very thin near the trailing edge of the contact, especially for stiffer surfaces. The surface roughness and power law index of the non-Newtonian lubricant both have significant effects on the film thickness and pressure profile between the cylinders under oscillatory motion.

scholarly journals Effect of an oscillating time-dependent pressure gradient on Dean flow: transient solution

2020 ◽  
Vol 9 (1) ◽  
Author(s):  
Basant K. Jha ◽  
Dauda Gambo
Keyword(s):  
Pressure Gradient ◽  
Initial Conditions ◽  
Fluid Velocity ◽  
Outer Cylinder ◽  
Time Dependent ◽  
Navier Stokes ◽  
Dean Flow ◽  
Continuity Equations ◽  
Riemann Sum ◽  
Flow Formation

Abstract Background Navier-Stokes and continuity equations are utilized to simulate fully developed laminar Dean flow with an oscillating time-dependent pressure gradient. These equations are solved analytically with the appropriate boundary and initial conditions in terms of Laplace domain and inverted to time domain using a numerical inversion technique known as Riemann-Sum Approximation (RSA). The flow is assumed to be triggered by the applied circumferential pressure gradient (azimuthal pressure gradient) and the oscillating time-dependent pressure gradient. The influence of the various flow parameters on the flow formation are depicted graphically. Comparisons with previously established result has been made as a limit case when the frequency of the oscillation is taken as 0 (ω = 0). Results It was revealed that maintaining the frequency of oscillation, the velocity and skin frictions can be made increasing functions of time. An increasing frequency of the oscillating time-dependent pressure gradient and relatively a small amount of time is desirable for a decreasing velocity and skin frictions. The fluid vorticity decreases with further distance towards the outer cylinder as time passes. Conclusion Findings confirm that increasing the frequency of oscillation weakens the fluid velocity and the drag on both walls of the cylinders.

scholarly journals Time Dependent Lyotropic Chromonic Textures in Microfluidic Confinements

Crystals ◽  
2020 ◽  
Vol 11 (1) ◽  
pp. 35 ◽  
Author(s):  
Anshul Sharma ◽  
Irvine Lian Hao Ong ◽  
Anupam Sengupta
Keyword(s):  
Phase Transition ◽  
Aspect Ratio ◽  
Temporal Dynamics ◽  
Initial Conditions ◽  
Flow Behavior ◽  
Medical Diagnostics ◽  
Time Dependent ◽  
Disodium Cromoglycate ◽  
M Phase ◽  
Static Conditions

Nematic and columnar phases of lyotropic chromonic liquid crystals (LCLCs) have been long studied for their fundamental and applied prospects in material science and medical diagnostics. LCLC phases represent different self-assembled states of disc-shaped molecules, held together by noncovalent interactions that lead to highly sensitive concentration and temperature dependent properties. Yet, microscale insights into confined LCLCs, specifically in the context of confinement geometry and surface properties, are lacking. Here, we report the emergence of time dependent textures in static disodium cromoglycate (DSCG) solutions, confined in PDMS-based microfluidic devices. We use a combination of soft lithography, surface characterization, and polarized optical imaging to generate and analyze the confinement-induced LCLC textures and demonstrate that over time, herringbone and spherulite textures emerge due to spontaneous nematic (N) to columnar M-phase transition, propagating from the LCLC-PDMS interface into the LCLC bulk. By varying the confinement geometry, anchoring conditions, and the initial DSCG concentration, we can systematically tune the temporal dynamics of the N- to M-phase transition and textural behavior of the confined LCLC. Overall, the time taken to change from nematic to the characteristic M-phase textures decreased as the confinement aspect ratio (width/depth) increased. For a given aspect ratio, the transition to the M-phase was generally faster in degenerate planar confinements, relative to the transition in homeotropic confinements. Since the static molecular states register the initial conditions for LC flows, the time dependent textures reported here suggest that the surface and confinement effects—even under static conditions—could be central in understanding the flow behavior of LCLCs and the associated transport properties of this versatile material.

Sign in / Sign up

Export Citation Format

Share Document