Separation Criterion for Turbulent Boundary Layers Via Similarity Analysis

2004 ◽  
Vol 126 (3) ◽  
pp. 297-304 ◽  
Author(s):  
Luciano Castillo ◽  
Xia Wang ◽  
William K. George
Keyword(s):  
Boundary Layer ◽  
Pressure Gradient ◽  
Boundary Layers ◽  
Boundary Layer Equation ◽  
Outer Part ◽  
Adverse Pressure Gradient ◽  
Gradient Flows ◽  
Boundary Layer Equations ◽  
Gradient Parameter ◽  
Momentum Boundary Layer

By using the RANS boundary layer equations, it will be shown that the outer part of an adverse pressure gradient turbulent boundary layer tends to remain in equilibrium similarity, even near and past separation. Such boundary layers are characterized by a single and constant pressure gradient parameter, Λ, and its value appears to be the same for all adverse pressure gradient flows, including those with eventual separation. Also it appears from the experimental data that the pressure gradient parameter, Λθ, is also approximately constant and given by Λθ=0.21±0.01. Using this and the integral momentum boundary layer equation, it is possible to show that the shape factor at separation also has to within the experimental uncertainty a single value: Hsep≅2.76±0.23. Furthermore, the conditions for equilibrium similarity and the value of Hsep are shown to be in reasonable agreement with a variety of experimental estimates, as well as the predictions from some other investigators.

Governing Parameters of Adverse Pressure Gradient Turbulent Boundary Layers

2018 ◽  
Author(s):  
Yvan Maciel ◽  
Tie Wei ◽  
Ayse G. Gungor ◽  
Mark P. Simens
Keyword(s):  
Boundary Layer ◽  
Reynolds Number ◽  
Pressure Gradient ◽  
Boundary Layers ◽  
Outer Region ◽  
Adverse Pressure Gradient ◽  
Turbulent Boundary Layers ◽  
Inertial Parameter ◽  
Velocity Scale ◽  
Gradient Parameter

We perform a careful nondimensional analysis of the turbulent boundary layer equations in order to bring out, without assuming any self-similar behaviour, a consistent set of nondimensional parameters characterizing the outer region of turbulent boundary layers with arbitrary pressure gradients. These nondimensional parameters are a pressure gradient parameter, a Reynolds number (different from commonly used ones) and an inertial parameter. They are obtained without assuming a priori the outer length and velocity scales. They represent the ratio of the magnitudes of two types of forces in the outer region, using the Reynolds shear stress gradient (apparent turbulent force) as the reference force: inertia to apparent turbulent forces for the inertial parameter, pressure to apparent turbulent forces for the pressure gradient parameter and apparent turbulent to viscous forces for the Reynolds number. We determine under what conditions they retain their meaning, depending on the outer velocity scale that is considered, with the help of seven boundary layer databases. We find the impressive result that if the Zagarola-Smits velocity is used as the outer velocity scale, the streamwise evolution of the three ratios of forces in the outer region can be accurately followed with these non-dimensional parameters in all these flows — not just the order of magnitude of these ratios. This cannot be achieved with three other outer velocity scales commonly used for pressure gradient turbulent boundary layers. Consequently, the three new nondimensional parameters, when expressed with the Zagarola-Smits velocity, can be used to follow — in a global sense — the streamwise evolution of the stream-wise mean momentum balance in the outer region. This study provides a clear and consistent framework for the analysis of the outer region of adverse-pressure-gradient turbulent boundary layers.

History effects and near equilibrium in adverse-pressure-gradient turbulent boundary layers

2017 ◽  
Vol 820 ◽  
pp. 667-692 ◽  
Author(s):  
A. Bobke ◽  
R. Vinuesa ◽  
R. Örlü ◽  
P. Schlatter
Keyword(s):  
Boundary Layer ◽  
Reynolds Number ◽  
Pressure Gradient ◽  
Boundary Layers ◽  
Adverse Pressure Gradient ◽  
Turbulent Boundary Layers ◽  
Mean Velocity ◽  
History Effects ◽  
Displacement Thickness ◽  
Gradient Parameter

Turbulent boundary layers under adverse pressure gradients are studied using well-resolved large-eddy simulations (LES) with the goal of assessing the influence of the streamwise pressure-gradient development. Near-equilibrium boundary layers were characterized through the Clauser pressure-gradient parameter $\unicode[STIX]{x1D6FD}$. In order to fulfil the near-equilibrium conditions, the free stream velocity was prescribed such that it followed a power-law distribution. The turbulence statistics pertaining to cases with a constant value of $\unicode[STIX]{x1D6FD}$ (extending up to approximately 40 boundary-layer thicknesses) were compared with cases with non-constant $\unicode[STIX]{x1D6FD}$ distributions at matched values of $\unicode[STIX]{x1D6FD}$ and friction Reynolds number $Re_{\unicode[STIX]{x1D70F}}$. An additional case at matched Reynolds number based on displacement thickness $Re_{\unicode[STIX]{x1D6FF}^{\ast }}$ was also considered. It was noticed that non-constant $\unicode[STIX]{x1D6FD}$ cases appear to approach the conditions of equivalent constant $\unicode[STIX]{x1D6FD}$ cases after long streamwise distances (approximately 7 boundary-layer thicknesses). The relevance of the constant $\unicode[STIX]{x1D6FD}$ cases lies in the fact that they define a ‘canonical’ state of the boundary layer, uniquely characterized by $\unicode[STIX]{x1D6FD}$ and $Re$. The investigations on the flat plate were extended to the flow around a wing section overlapping in terms of $\unicode[STIX]{x1D6FD}$ and $Re$. Comparisons with the flat-plate cases at matched values of $\unicode[STIX]{x1D6FD}$ and $Re$ revealed that the different development history of the turbulent boundary layer on the wing section leads to a less pronounced wake in the mean velocity as well as a weaker second peak in the Reynolds stresses. This is due to the weaker accumulated effect of the $\unicode[STIX]{x1D6FD}$ history. Furthermore, a scaling law suggested by Kitsios et al. (Intl J. Heat Fluid Flow, vol. 61, 2016, pp. 129–136), proposing the edge velocity and the displacement thickness as scaling parameters, was tested on two constant-pressure-gradient parameter cases. The mean velocity and Reynolds-stress profiles were found to be dependent on the downstream development. The present work is the first step towards assessing history effects in adverse-pressure-gradient turbulent boundary layers and highlights the fact that the values of the Clauser pressure-gradient parameter and the Reynolds number are not sufficient to characterize the state of the boundary layer.

Pressure gradient effects on the large-scale structure of turbulent boundary layers

2013 ◽  
Vol 715 ◽  
pp. 477-498 ◽  
Author(s):  
Zambri Harun ◽  
Jason P. Monty ◽  
Romain Mathis ◽  
Ivan Marusic
Keyword(s):  
Boundary Layer ◽  
Reynolds Number ◽  
Pressure Gradient ◽  
Boundary Layers ◽  
Amplitude Modulation ◽  
Large Scale ◽  
Outer Region ◽  
Adverse Pressure Gradient ◽  
Turbulent Boundary Layers ◽  
Small Scale

AbstractResearch into high-Reynolds-number turbulent boundary layers in recent years has brought about a renewed interest in the larger-scale structures. It is now known that these structures emerge more prominently in the outer region not only due to increased Reynolds number (Metzger & Klewicki, Phys. Fluids, vol. 13(3), 2001, pp. 692–701; Hutchins & Marusic, J. Fluid Mech., vol. 579, 2007, pp. 1–28), but also when a boundary layer is exposed to an adverse pressure gradient (Bradshaw, J. Fluid Mech., vol. 29, 1967, pp. 625–645; Lee & Sung, J. Fluid Mech., vol. 639, 2009, pp. 101–131). The latter case has not received as much attention in the literature. As such, this work investigates the modification of the large-scale features of boundary layers subjected to zero, adverse and favourable pressure gradients. It is first shown that the mean velocities, turbulence intensities and turbulence production are significantly different in the outer region across the three cases. Spectral and scale decomposition analyses confirm that the large scales are more energized throughout the entire adverse pressure gradient boundary layer, especially in the outer region. Although more energetic, there is a similar spectral distribution of energy in the wake region, implying the geometrical structure of the outer layer remains universal in all cases. Comparisons are also made of the amplitude modulation of small scales by the large-scale motions for the three pressure gradient cases. The wall-normal location of the zero-crossing of small-scale amplitude modulation is found to increase with increasing pressure gradient, yet this location continues to coincide with the large-scale energetic peak wall-normal location (as has been observed in zero pressure gradient boundary layers). The amplitude modulation effect is found to increase as pressure gradient is increased from favourable to adverse.

scholarly journals Similarity Solutions of the MHD Boundary Layer Flow Past a Constant Wedge within Porous Media

2017 ◽  
Vol 2017 ◽  
pp. 1-11 ◽  
Author(s):  
Ramesh B. Kudenatti ◽  
Shreenivas R. Kirsur ◽  
Achala L. Nargund ◽  
N. M. Bujurke
Keyword(s):  
Boundary Layer ◽  
Porous Medium ◽  
Pressure Gradient ◽  
Adverse Pressure Gradient ◽  
Velocity Profiles ◽  
Similarity Solutions ◽  
Positive Pressure ◽  
Boundary Layer Equations ◽  
Similarity Transformations ◽  
Wide Range

The two-dimensional magnetohydrodynamic flow of a viscous fluid over a constant wedge immersed in a porous medium is studied. The flow is induced by suction/injection and also by the mainstream flow that is assumed to vary in a power-law manner with coordinate distance along the boundary. The governing nonlinear boundary layer equations have been transformed into a third-order nonlinear Falkner-Skan equation through similarity transformations. This equation has been solved analytically for a wide range of parameters involved in the study. Various results for the dimensionless velocity profiles and skin frictions are discussed for the pressure gradient parameter, Hartmann number, permeability parameter, and suction/injection. A far-field asymptotic solution is also obtained which has revealed oscillatory velocity profiles when the flow has an adverse pressure gradient. The results show that, for the positive pressure gradient and mass transfer parameters, the thickness of the boundary layer becomes thin and the flow is directed entirely towards the wedge surface whereas for negative values the solutions have very different characters. Also it is found that MHD effects on the boundary layer are exactly the same as the porous medium in which both reduce the boundary layer thickness.

Smooth and Rough Turbulent Boundary Layers: A Look at Skin Friction, Pressure Gradient and Roughness

2006 ◽  
Author(s):  
Katherine A. Newhall ◽  
Raul Bayoan Cal ◽  
Brian Brzek ◽  
Gunnar Johansson ◽  
Luciano Castillo
Keyword(s):  
Boundary Layer ◽  
Pressure Gradient ◽  
Skin Friction ◽  
Boundary Layers ◽  
Rough Surfaces ◽  
Boundary Layer Equation ◽  
Roughness Parameter ◽  
Surface Boundary ◽  
Favorable Pressure Gradient ◽  
Momentum Integral

The skin friction for a turbulent boundary layer can be measured and calculated in several ways with varying degrees of accuracy. In particular, the methods of the velocity gradient at the wall, the integrated boundary layer equation and the momentum integral equation are evaluated for both smooth and rough surface boundary layers. These methods are compared to the oil film interferometry technique measurements for the case of smooth surface flows. The integrated boundary layer equation is found to be relatively reliable, and the values computed with this technique are used to investigate the effect of increasing external favorable pressure gradient for both smooth and rough surfaces, and increasing roughness parameter for the rough surfaces.

Experimental results for the transpired turbulent boundary layer in an adverse pressure gradient

1975 ◽  
Vol 69 (2) ◽  
pp. 353-375 ◽  
Author(s):  
P. S. Andersen ◽  
W. M. Kays ◽  
R. J. Moffat
Keyword(s):  
Boundary Layer ◽  
Shear Stress ◽  
Turbulent Boundary Layer ◽  
Pressure Gradient ◽  
Boundary Layer Equation ◽  
Adverse Pressure Gradient ◽  
Stream Velocity ◽  
Pressure Gradients ◽  
Mean Velocity ◽  
Displacement Thickness

An experimental investigation of the fluid mechanics of the transpired turbulent boundary layer in zero and adverse pressure gradients was carried out on the Stanford Heat and Mass Transfer Apparatus. Profiles of (a) the mean velocity, (b) the intensities of the three components of the turbulent velocity fluctuations and (c) the Reynolds stress were obtained by hot-wire anemometry. The wall shear stress was measured by using an integrated form of the boundary-layer equation to ‘extrapolate’ the measured shear-stress profiles to the wall.The two experimental adverse pressure gradients corresponded to free-stream velocity distributions of the type u∞ ∞ xm, where m = −0·15 and −0·20, x being the streamwise co-ordinate. Equilibrium boundary layers (i.e. flows with velocity defect profile similarity) were obtained when the transpiration velocity v0 was varied such that the blowing parameter B = pv0u∞/τ0 and the Clauser pressure-gradient parameter $\beta\equiv\delta_1\tau_0^{-1}\,dp/dx $ were held constant. (τ0 is the shear stress at the wall and δ1 is the displacement thickness.)Tabular and graphical results are presented.

Pressure Gradient Effects on Smooth- and Rough-Surface Turbulent Boundary Layers—Part II: Adverse Pressure Gradient

2014 ◽  
Vol 137 (1) ◽  
Author(s):  
Ju Hyun Shin ◽  
Seung Jin Song
Keyword(s):  
Boundary Layer ◽  
Reynolds Number ◽  
Pressure Gradient ◽  
Boundary Layers ◽  
Boundary Layer Thickness ◽  
Adverse Pressure Gradient ◽  
Turbulent Boundary Layers ◽  
Roughness Effects ◽  
Mean Velocity ◽  
Velocity Defect

An experimental investigation has been conducted to identify the effects of pressure gradient and surface roughness on turbulent boundary layers. In Part II, smooth- and rough-surface turbulent boundary layers with and without adverse pressure gradient (APG) are presented at a fixed Reynolds number (based on the length of flat plate) of 900,000. Flat-plate boundary layer measurements have been conducted using a single-sensor, hot-wire probe. For smooth surfaces, compared to the zero pressure gradient (ZPG) boundary layer, the APG boundary layer has a higher mean velocity defect throughout the boundary layer and lower friction coefficient. APG decreases the streamwise normal Reynolds stress for y less than 0.4 times the boundary layer thickness and increases it slightly in the outer region. For rough surfaces, APG reduces the roughness effects of increasing the mean velocity defect and normal Reynolds stress for y less than 23 and 28 times the average roughness height, respectively. Consistently, for the same roughness, APG decreases the integrated streamwise turbulent kinetic energy. APG also decreases the roughness effect on the friction coefficient, roughness Reynolds number, and roughness shift. Compared to the ZPG boundary layers, the roughness effects on integral boundary layer parameters—boundary layer thickness and momentum thickness—are weaker under APG. Thus, contrary to the favorable pressure gradient (FPG) in part I, APG reduces the roughness effects on turbulent boundary layers.

An Approximate Method for the Calculation of Turbulent Boundary Layers in Diffusers

1957 ◽  
Vol 8 (1) ◽  
pp. 58-77 ◽  
Author(s):  
J. F. Norbury
Keyword(s):  
Boundary Layer ◽  
Shear Stress ◽  
Pressure Gradient ◽  
Approximate Method ◽  
Boundary Layers ◽  
Stress Gradient ◽  
Adverse Pressure Gradient ◽  
Turbulent Boundary Layers ◽  
Form Parameter ◽  
Parameter Equation

SummaryAn approximate method is described for the calculation of turbulent boundary layers in which the turbulence is developed before the commencement of the adverse pressure gradient, as in most diffuser layers. It is based on a method due to Spence which has been modified and also extended to the calculation of three-dimensional diverging layers such as occur in ducts whose breadth is increasing. The velocity profiles occurring in a diverging layer are examined and it is shown that the inner part obeys the universal logarithmic law, as in two-dimensional layers. This result is used to obtain an equation for the form parameter in diverging layers, by substitution in the equation of motion and incorporation of the equations of momentum and continuity for diverging flow. The form parameter equation contains a term involving the gradient of shear stress at y = θ and values of this term are obtained by the analysis of experimental data and the substitution of known values for all the other terms in the form parameter equation. Values of the term involving shear stress gradient are then correlated in terms of known boundary layer quantities, and the resulting correlation allows the formulation of a step-by-step method for the solution of the form parameter equation. This may be used in conjunction with the momentum equation to predict the boundary layer growth. It was not found possible to effect a satisfactory correlation for boundary layers on lifting aerofoils, in which the turbulence develops within the adverse pressure gradient, and the method cannot be used for the prediction of such layers. The results of a number of calculations are given.

The relaxation of a turbulent boundary layer in an adverse pressure gradient

1989 ◽  
Vol 200 ◽  
pp. 367-387 ◽  
Author(s):  
Andrew D. Cutler ◽  
James P. Johnston
Keyword(s):  
Boundary Layer ◽  
Turbulent Boundary Layer ◽  
Pressure Gradient ◽  
Eddy Viscosity ◽  
Layer Structure ◽  
Adverse Pressure Gradient ◽  
Great Sensitivity ◽  
A Value ◽  
Gradient Parameter ◽  
Self Similar

The relaxation of a reattached turbulent boundary layer downstream of a wall fence has been investigated. The boundary layer has an adverse pressure gradient imposed upon it which is adjusted in an attempt to bring the boundary layer into equilibrium. This is done by adjusting the pressure gradient so as to bring the Clauser parameter (G) down to a value of about 11.4 and then maintain it constant. In the region from the reattachment point to 2 or 3 reattachment lengths downstream, the boundary layer recovers from the initial major effects of reattachment. Farther downstream (where G is constant) the pressure-gradient parameter changes very slowly and profiles of non-dimensionalized eddy viscosity appear self-similar. However, pressure gradient and eddy viscosity are both roughly twice as large as expected on the basis of previous studies of equilibrium turbulent boundary layers. It is not known whether equilibrium has been achieved in this downstream region. This is another illustration of the great sensitivity of boundary-layer structure to perturbations.

Sign in / Sign up

Export Citation Format

Share Document