Reduction of NOx and Particulate Emissions by Using Oxygen-Enriched Combustion Air in a Locomotive Diesel Engine

2003 ◽  
Vol 125 (2) ◽  
pp. 524-533 ◽  
Author(s):  
R. B. Poola ◽  
R. Sekar
Keyword(s):  
Diesel Engine ◽  
Fuel Consumption ◽  
External Source ◽  
Operating Regime ◽  
Specific Fuel Consumption ◽  
Air Separation ◽  
Injection Timing ◽  
Particulate Emissions ◽  
Brake Specific Fuel Consumption ◽  
Separation Membrane

This paper discusses operational and emissions results obtained with a locomotive (two-cylinder, EMD 567B) research diesel engine when oxygen-enriched combustion air is used. An operating regime was identified in which particulates and NOx could be reduced simultaneously when the concentration of intake air oxygen, fueling rate, and injection timing were optimized. Using oxygen from an external source, particulates were reduced by approximately 60% and NOx emissions were reduced by 15–20% with the optimal operating strategy. Higher gross power, lower peak cylinder pressures, and lower brake-specific fuel consumption were also observed. Gross power was increased by about 15–20% at base peak combustion pressure, and gross brake-specific fuel consumption was decreased by 2–10% with load. The effect of achieving oxygen enrichment by means of an air separation membrane is beyond the scope of the current study.

Simultaneous Reduction of NOx and Particulate Emissions by Using Oxygen-Enriched Combustion Air

2001 ◽  
Author(s):  
Ramesh Poola ◽  
Raj Sekar
Keyword(s):  
Diesel Engine ◽  
Fuel Consumption ◽  
External Source ◽  
Operating Regime ◽  
Specific Fuel Consumption ◽  
Air Separation ◽  
Injection Timing ◽  
Particulate Emissions ◽  
Brake Specific Fuel Consumption ◽  
Auxiliary Equipment

Abstract This paper discusses the results obtained from experiments conducted on a large-bore diesel engine when oxygen-enriched combustion air is used. An operating regime was identified in which particulates and NOx could be reduced simultaneously when the concentration of intake air oxygen, fueling rate, and injection timing were optimized. Additional benefits such as higher gross power, lower peak cylinder pressures, and lower brake-specific fuel consumption were also observed under these optimized operating parameters. With an optimal operating strategy (oxygen concentration, fueling rate, and timing), particulates were reduced by approximately 60% and NOx emissions were reduced by 15–20%. Gross power was increased by about 15–20% at base peak combustion pressure, and brake-specific fuel consumption was decreased by 2–10% with load. These results were obtained on a two-cylinder (EMD 567B) locomotive research diesel engine using oxygen from an external source. To utilize this technique in practice, an air separation membrane and associated auxiliary equipment could be connected to the engine’s intake air system (after the air filter) to supply the desired oxygen-enriched combustion air; this additional evaluation is beyond the scope of current study. Although operating the membrane causes a parasitic power drain, the increase in gross power could compensate for these losses, resulting in a potential net gain in power and lower emissions for diesel engines.

Two-Stroke Marine Diesel Engine Variable Injection Timing System Performance Evaluation and Optimum Setting for Minimum Fuel Consumption at Acceptable NOx Levels

2014 ◽  
Author(s):  
Dimitrios T. Hountalas ◽  
Spiridon Raptotasios ◽  
Antonis Antonopoulos ◽  
Stavros Daniolos ◽  
Iosif Dolaptzis ◽  
...  
Keyword(s):  
Diesel Engine ◽  
Fuel Consumption ◽  
Engine Performance ◽  
Operating Conditions ◽  
Specific Fuel Consumption ◽  
Injection Timing ◽  
Nox Emissions ◽  
Pressure Measurements ◽  
Cylinder Pressure ◽  
Start Of Injection

Currently the most promising solution for marine propulsion is the two-stroke low-speed diesel engine. Start of Injection (SOI) is of significant importance for these engines due to its effect on firing pressure and specific fuel consumption. Therefore these engines are usually equipped with Variable Injection Timing (VIT) systems for variation of SOI with load. Proper operation of these systems is essential for both safe engine operation and performance since they are also used to control peak firing pressure. However, it is rather difficult to evaluate the operation of VIT system and determine the required rack settings for a specific SOI angle without using experimental techniques, which are extremely expensive and time consuming. For this reason in the present work it is examined the use of on-board monitoring and diagnosis techniques to overcome this difficulty. The application is conducted on a commercial vessel equipped with a two-stroke engine from which cylinder pressure measurements were acquired. From the processing of measurements acquired at various operating conditions it is determined the relation between VIT rack position and start of injection angle. This is used to evaluate the VIT system condition and determine the required settings to achieve the desired SOI angle. After VIT system tuning, new measurements were acquired from the processing of which results were derived for various operating parameters, i.e. brake power, specific fuel consumption, heat release rate, start of combustion etc. From the comparative evaluation of results before and after VIT adjustment it is revealed an improvement of specific fuel consumption while firing pressure remains within limits. It is thus revealed that the proposed method has the potential to overcome the disadvantages of purely experimental trial and error methods and that its use can result to fuel saving with minimum effort and time. To evaluate the corresponding effect on NOx emissions, as required by Marpol Annex-VI regulation a theoretical investigation is conducted using a multi-zone combustion model. Shop-test and NOx-file data are used to evaluate its ability to predict engine performance and NOx emissions before conducting the investigation. Moreover, the results derived from the on-board cylinder pressure measurements, after VIT system tuning, are used to evaluate the model’s ability to predict the effect of SOI variation on engine performance. Then the simulation model is applied to estimate the impact of SOI advance on NOx emissions. As revealed NOx emissions remain within limits despite the SOI variation (increase).

scholarly journals Effect of cetane improver addition into diesel fuel: Methanol mixtures on performance and emissions at different injection pressures

2017 ◽  
Vol 21 (1 Part B) ◽  
pp. 555-566 ◽  
Author(s):  
Feyyaz Candan ◽  
Murat Ciniviz ◽  
Ilker Ors
Keyword(s):  
Diesel Engine ◽  
Fuel Consumption ◽  
Diesel Fuel ◽  
Engine Performance ◽  
Injection Pressure ◽  
Specific Fuel Consumption ◽  
Exhaust Emission ◽  
Brake Specific Fuel Consumption ◽  
Consumption Values ◽  
Smoke Opacity

In this study, methanol in ratios of 5-10-15% were incorporated into diesel fuel with the aim of reducing harmful exhaust gasses of Diesel engine, di-tertbutyl peroxide as cetane improver in a ratio of 1% was added into mixture fuels in order to reduce negative effects of methanol on engine performance parameters, and isobutanol of a ratio of 1% was used as additive for preventing phase separation of all mixtures. As results of experiments conducted on a single cylinder and direct injection Diesel engine, methanol caused the increase of NOx emission while reducing CO, HC, CO2, and smoke opacity emissions. It also reduced torque and power values, and increased brake specific fuel consumption values. Cetane improver increased torque and power values slightly compared to methanol-mixed fuels, and reduced brake specific fuel consumption values. It also affected exhaust emission values positively, excluding smoke opacity. Increase of injector injection pressure affected performances of methanol-mixed fuels positively. It also increased injection pressure and NOx emissions, while reducing other exhaust emissions.

The Comparative Trail Research on the Performance of a Diesel Engine Fuelled with Diesel Fuel and Biodiesel/Diesel Blended Fuel

2011 ◽  
Vol 142 ◽  
pp. 103-106
Author(s):  
Wen Ming Cheng ◽  
Hui Xie ◽  
Gang Li
Keyword(s):  
Diesel Engine ◽  
Fuel Consumption ◽  
Diesel Fuel ◽  
Thermal Efficiency ◽  
Specific Fuel Consumption ◽  
Brake Specific Fuel Consumption ◽  
Brake Thermal Efficiency ◽  
Series Of Experiments ◽  
Blended Fuel ◽  
Load Conditions

This paper discusses the brake specific fuel consumption and brake thermal efficiency of a diesel engine using cottonseed biodiesel blended with diesel fuel. A series of experiments were conducted for the various blends under varying load conditions at a speed of 1500 rpm and 2500 rpm and the results were compared with the neat diesel. From the results, it is found that the brake specific fuel consumption of cottonseed biodiesel is slightly higher than that of diesel fuel at different engine loads and speeds, with this increase being higher the higher the percentage of the biodiesel in the blend. And the brake thermal efficiency of cottonseed biodiesel is nearly similar to that of diesel fuel at different engine loads and speeds. From the investigation, it is concluded that cottonseed biodiesl can be directly used in diesel engines without any modifications, at least in small blending ratios.

scholarly journals An Assessment on Performance Characteristics of Diesel Engine Using Lemongrass-Diesel Oil Fuel Blends

2021 ◽  
Author(s):  
Naveen Rana ◽  
Harikrishna Nagwan ◽  
Kannan Manickam
Keyword(s):  
Diesel Engine ◽  
Fuel Consumption ◽  
Diesel Fuel ◽  
Thermal Efficiency ◽  
Specific Fuel Consumption ◽  
Performance Characteristics ◽  
Emission Characteristics ◽  
Brake Specific Fuel Consumption ◽  
Brake Thermal Efficiency ◽  
Fuel Blends

Abstract Indeed, the development of alternative fuels for use in internal combustion engines has become an essential requirement to meet the energy demand and to deal with the different problems related to fuel. The research in this domain leads to the identification of adverse fuel properties and for their solution standard limits are being defined. This paper outlines an investigation of performance and combustion characteristics of a 4-stroke diesel engine using different cymbopogon (lemongrass) - diesel fuel blends. 10% to 40% cymbopogon is mixed with diesel fuel and tested for performance characteristics like brake specific fuel consumption and brake thermal efficiency. To obtain emission characteristics smoke density in the terms of HSU has been measured. In result, it has observed that there is an increase of 5% in brake thermal efficiency and 16.33% decrease in brake specific fuel consumption. Regarding emission characteristics, a 12.9% decrease in smoke emission has been found.

The Study on the Top Clearance Plunger Pump in Diesel Engine

2013 ◽  
Vol 805-806 ◽  
pp. 1755-1758
Author(s):  
Jie Zhong Zhang ◽  
Qing Ping Zheng
Keyword(s):  
Diesel Engine ◽  
Fuel Consumption ◽  
High Speed ◽  
Simulation Method ◽  
Specific Fuel Consumption ◽  
Brake Specific Fuel Consumption ◽  
Plunger Pump ◽  
Fuel Supply ◽  
Oil Pump

The simulation method was used to study the fuel supply and injection characteristics of diesel top clearance plunger pump. The results show that the top clearance plunger pump relative advance of fuel supply is larger than that of the traditional plunger, and it can achieve the purpose of injection advance when the oil pump operate at 600~1000rpm. Through optimizing the structure of top clearance plunger, the amount of the injection advance can become larger and the advanced range of speed is increased. After optimized, the BSFC (Brake Specific Fuel Consumption) is 4.3% lower than that before when the diesel engine matched the top clearance plunger, which shows its advantage especially in working at high-speed.

scholarly journals DETERMINATION OF COMPLEX FUEL-ECOLOGICAL CRITERION FOR DIESEL WORKING ON WATER-FUEL EMULSION

2021 ◽  
pp. 31-37
Author(s):  
A.P. Marchenko ◽  
I.V. Parsadanov ◽  
A.V. Savchenko
Keyword(s):  
Diesel Engine ◽  
Fuel Consumption ◽  
Environmental Performance ◽  
Alternative Fuels ◽  
Internal Combustion Engines ◽  
Internal Combustion ◽  
Specific Fuel Consumption ◽  
Injection Timing ◽  
Boost Pressure ◽  
Combustion Engines

Today, internal combustion engines are very common as energy sources in many countries around the world. This makes the tasks related to improving the environmental performance of internal combustion engines relevant. The introduction of alternative fuels in internal combustion engines is an effective way to reduce their negative impact on the environment. One of the most available and widespread alternative fuels for diesels is a water-fuel emulsion. The use of water-fuel emulsion makes it possible to reduce the specific fuel consumption of petroleum origin, as well as to achieve a significant reduction in emissions of harmful substances from diesel exhaust. However, due to differences in the physical properties of traditional diesel fuel and water-fuel emulsion, the course of the processes of mixture formation and combustion in the diesel cylinder changes significantly. This may be due to the emergence of a reserve for further improvement of the diesel engine by selecting the parameters of the diesel engine running on water-fuel emulsion. The study selected the following parameters for variation: compression ratio, boost pressure, duration of the injection process, injection timing. The article considers the influence of these parameters on the Brake-specific fuel consumption of diesel, the specific emission of particulate matter and nitrogen oxides, the maximum pressure in the cylinder. The nature and degree of influence of changes in the parameters of the diesel engine on its performance was determined using mathematical modeling. It should be noted that the influence of each of the parameters selected for variation is quite complex and often ambiguous. That is, when some indicators improve, others may deteriorate somewhat. Therefore, in order to select the most rational parameters of a diesel engine running on a water-fuel emulsion, it is necessary to simultaneously assess the economic and environmental performance of the diesel engine. For this assessment, a method was used to determine a comprehensive fuel and environmental criterion for a diesel engine running on a water-fuel emulsion. Thus, the article shows the potential for comprehensive improvement of environmental and economic performance of the diesel engine by choosing rational parameters.

scholarly journals Performance, Emissions and Durability Studies on Diesel Engine Fuelled with a Preheated Raw Microalgal Oil

Proceedings ◽  
2020 ◽  
Vol 58 (1) ◽  
pp. 4
Author(s):  
Hassan M Attar ◽  
Dawei Wu ◽  
Adam P Harvey
Keyword(s):  
Diesel Engine ◽  
Fuel Consumption ◽  
Specific Fuel Consumption ◽  
Critical Parameters ◽  
Significant Finding ◽  
Brake Specific Fuel Consumption ◽  
Gas Temperature ◽  
Durability Test ◽  
Microalgal Oil ◽  
Brake Power

Preheated Schizochytrium sp. raw microalgae oil (MAO) was evaluated as a fuel in a single-cylinder four-stroke diesel engine to produce a comparative study of MAO and diesel oil (DO) critical parameters. In particular, brake power, brake specific fuel consumption (BSFC), brake thermal efficiency (BTE), in-cylinder pressure (CP), exhaust gas temperature (EGT), both nitrogen oxides (NOx) and carbon monoxide (CO) emissions were investigated. Additionally, an engine durability test for longevity was undertaken over a 30-h period, using raw MAO as the fuel. The study demonstrated that the preheated MAO could be successfully used in a diesel engine smoothly. The use of MAO reduced the engine brake power by 26% and increased brake-specific fuel consumption by 20%. The most significant finding from this research study is that there was a significant reduction in NOx and CO emission by 42% and 60% when using raw MAO, respectively. Therefore, these findings demonstrate that algae oil is a highly credible fuel for use in diesel engines and offers a promising solution to diesel engine emissions.

Sign in / Sign up

Export Citation Format

Share Document