TORREFACTION OF PALM BIOMASS BRIQUETTES AT DIFFERENT TEMPERATURE

2016 ◽  
Vol 78 (9-2) ◽  
Author(s):  
Hasan Mohd Faizal ◽  
M. Amin M. Jusoh ◽  
Mohd Rosdzimin Abdul Rahman ◽  
S. Syahrullail ◽  
Z. A. Latiff
Keyword(s):  
Moisture Content ◽  
Carbon Content ◽  
Compaction Pressure ◽  
Calorific Value ◽  
High Energy ◽  
Fixed Carbon ◽  
Gross Calorific Value ◽  
Fresh Fruit Bunch ◽  
Combustion Properties ◽  
Fixed Carbon Content

The climate change has driven towards transformation from the high energy dependence on fossil fuel to inexhaustible renewable energy such as solar, wind, mini hydro and biomass. In Malaysia, abundant of palm biomass residues are produced during the processing of fresh fruit bunch. Therefore it is inevitable to harness these bioenergy sources in order to prevent waste accumulation at adjacent to palm mills. In order to utilize such bioenergy sources and to cope with the fast growing demand of energy, combination technique of densification and torrefaction is one of the potential ways to be practised. In the present study, the physical and combustion properties of torrefied empty  fruit bunch (EFB) briquettes were investigated experimentally with constant nitrogen flow rate of 1 l/min , for various torrefaction temperatures (225-300). Before torrefaction process, EFB briquettes were initially produced under controlled condition with compaction pressure of 7 MPa and briquetting temperature of 150. In general, the torrefied EFB briquettes were successfully produced in the present study. The results show that an increase in torrefaction temperature from 225  to 300  causes a significant increase in gross calorific value (from around 17400 kJ/kg to 25000 kJ/kg), fixed carbon content (from 16.2% to 46.2%) and ash content (from 2.4% to 17.2%). On the other hand, relaxed density and volatile matter decrease, from 1017 kg/m3 to 590 kg/m3 and from 73.1% to 29.7%, respectively. As a conclusion, the gross calorific value and fixed carbon content are improved due to torrefaction. In addition, it was found that gross calorific value and moisture content of the torrefied EFB briquettes fulfil the requirement for commercial briquette production as stated by DIN51731 (gross calorific value>17500 kJ/kg and moisture content <10%). 

scholarly journals Energetic potential of bamboo culms for industrial and domestic use in Southern Brazil

2016 ◽  
Vol 46 (11) ◽  
pp. 1963-1968 ◽  
Author(s):  
Ailton Leonel Balduino Junior ◽  
Thalles Yurgen Balduino ◽  
Gustavo Friederichs ◽  
Alexsandro Bayestorff da Cunha ◽  
Martha Andreia Brand
Keyword(s):  
Chemical Composition ◽  
Carbon Content ◽  
Calorific Value ◽  
Energy Generation ◽  
Extractive Content ◽  
Fixed Carbon ◽  
Gross Calorific Value ◽  
Bambusa Vulgaris ◽  
Domestic Use ◽  
Fixed Carbon Content

ABSTRACT: This study aimed to determine the energetic quality of the Bambusa vulgaris culms for combustion (in natura) and as a charcoal. Five individuals (culms) of Bambusa vulgaris of 3 years of age were analyzed, gathered in the city of Florianópolis, Santa Catarina. In the in natura culms it was determined the moisture content freshly gathered (39%); basic density (0.624gcm-3); the chemical composition (total extractive content (16.26%) and lignin content (25.76%)); the proximate chemical composition (volatiles content (82.25%); fixed carbon content (15.26%) and ash (2.49%)) and gross calorific value (4571kcalkg-1). In the charcoal, produced in the laboratory, the determined properties were the gravimetric yield (36.40%);the apparent density (0.372gcm-3); volatiles content (27.55%); fixed carbon content (67.32%); ash (5.12%) and gross calorific value (7431kcalkg-1). The Bambusa vulgaris species has potential for use in the energy generation either in natura, as chips for burning in boilers or in the charcoal form for domestic use, it can be used to broaden the base of biomass for energy generation and to replace the timber species of Pinus and Eucalyptus gender used for this purpose in the Southern region of Brazil.

scholarly journals Pemanfaatan Limbah Kulit Kakao Menjadi Briket Arang sebagai Bahan Bakar Alternatif dengan Penambahan Ampas Buah Merah

2019 ◽  
Vol 13 (1) ◽  
pp. 57
Author(s):  
Syarifhidayahtullah Syarif ◽  
Rochim Bakti Cahyono ◽  
Muslikhin Hidayat
Keyword(s):  
Moisture Content ◽  
Carbon Content ◽  
Calorific Value ◽  
Ash Content ◽  
Fruit Pulp ◽  
Volatile Content ◽  
Fixed Carbon ◽  
Shell Waste ◽  
Cocoa Shell ◽  
Fixed Carbon Content

A B S T R A C TThe conversion of cocoa shell waste into char briquettes has been carried out through various methods. However, the product characteristics do not meet the SNI briquettes requirements. Therefore, it is necessary to improve process engineering by mixing cocoa peel waste with red fruit pulp to get char briquettes in order to improve quality of briquette products. This research was carried out through pyrolysis process with temperthwatures up to 500 oC and held for 4 hours. The research objective was to produce char briquettes from cacao pod shell waste with the addition of red fruit pulp and its characteristic test. The study was designed with 2 variables, namely independent variables in the form of char raw material powder that passed 50 mesh sieve, weight ratio of cocoa shell char powder and red fruit pulp char powder (100:0, 70:30, 50:50, 30:70, and 0%:100%), pressure (100 kg/cm2), 10% starch adhesive from raw materials, and briquette diameter of 40 mm. Whereas the dependent variables are the moisture content (%), volatile content (%), ash content (%), fixed carbon content (%), and calorific value (cal/g). The results showed that the process of pyrolysis of char briquettes waste cocoa shell with red fruit pulp can increase its calorific value. The best characteristics of briquette were obtained from mixed briquettes (composition of 30%:70%) with moisture content of 5.63%, volatile content of 18.65%, ash content of 9.45%, fixed carbon content of 66.27%, and calorific value of 6422 cal/g.A B S T R A KPemanfaatan limbah kulit buah kakao menjadi briket arang telah banyak dilakukan melalui berbagai metode tetapi belum memenuhi persyaratan SNI briket arang. Oleh karena itu, perlu diupayakan untuk mendapatkan briket arang yang memenuhi persyaratan SNI. Salah satunya dengan cara mencampurkan limbah kulit kakao dengan ampas buah merah karena ampas buah merah memiliki nilai kalor yang cukup tinggi. Penelitian ini dilakukan melalui proses pirolisis dengan suhu sampai dengan 500 oC  dan ditahan selama 4 jam. Tujuan penelitian untuk memproduksi briket arang dari limbah kulit buah kakao dengan penambahan ampas buah merah serta uji karakteristiknya. Penelitian dirancang dengan 2 variabel, yaitu variabel bebas (independent variable) berupa ukuran serbuk bahan baku arang yang lolos saringan  50 mesh, rasio massa campuran serbuk arang kulit kakao dengan serbuk arang ampas buah merah (100:0, 70:30, 50:50, 30:70, dan 0%:100%), tekanan pengempaan (100 kg/cm2), perekat kanji 10% dari bahan baku, dan diameter briket 40 mm. Variabel terikat (dependent variable) yang diukur yaitu kadar air (%), kadar zat mudah menguap (%), kadar abu (%), kadar karbon terikat (%), dan nilai kalor (kal/g). Hasil penelitian menunjukkan bahwa, dengan melalui proses pirolisis briket arang limbah kulit kakao dengan ampas buah merah dapat meningkatkan nilai kalor-nya. Karakteristik briket terbaik diperoleh dari briket komposisi campuran (30%:70%) dengan kadar air 5,63 %, kadar zat mudah menguap 18,65 %, kadar abu 9,45 %, kadar karbon terikat 66,27 %, dan nilai kalor 6422 kal/g.

scholarly journals THE EFFECT OF BINDER RATIO ON THE PHYSICAL AND COMBUSTION CHARACTERISTICS OF CARBONIZED RICE STALK BRIQUETTES

2020 ◽  
pp. 221-229
Author(s):  
Rapheal Ige ◽  
Elinge Ogala ◽  
Cosmos Moki ◽  
Abdulrahman Habeeb
Keyword(s):  
Moisture Content ◽  
Carbon Content ◽  
Calorific Value ◽  
Volatile Matter ◽  
Ash Content ◽  
Hot Water ◽  
High Concentration ◽  
Fixed Carbon ◽  
Binder Ratio ◽  
Fixed Carbon Content

The selection or choice of agro-waste briquettes for domestic and industrial cottage applications depends on the fuel properties. In this study, the briquette was produced by carbonizing the rice stalk followed by crushing and sieving, the binder was prepared by dissolving the starch in hot water, then mixed with the sieved carbonized rice stalk and then the briquette was produced using the briquetting machine. Proximate analyses, viability, characteristics and combustion were determined to know the average composition of their constituents. From the results obtained it was observed that ash content, moisture content, after glow and ignition propagation decrease as the binder ratio increase while fixed carbon content, volatile matter, calorific value, density and compressive strength increase. The results of this work indicate that briquettes produced using high concentration of the binder would make good biomass fuels. However, it has a high moisture content of 25.00%, high ash content of 23.00%, moderate volatile matter of 44.80%, low fixed carbon content of 32.20%, moderate calorific value of 13.86 MJ/Kg and high density of 0.643g/cm3. The results obtained for all the parameters showed that rice stalks briquettes produced with high concentration of the binder (starch) had a better performance based on their combustion profile.

scholarly journals Effect of Fuel Material Compositions on Combustion Properties of Wood Chips from Smallhold Farm Plots in a Sudano-Sahelian Environment of Nigeria

2020 ◽  
pp. 93-104
Author(s):  
O. A. Sotannde ◽  
A. M. Dadile ◽  
M. Umar ◽  
S. M. Idoghor ◽  
B. D. Zira
Keyword(s):  
Moisture Content ◽  
Tree Species ◽  
Calorific Value ◽  
Volatile Matter ◽  
Wood Chips ◽  
Fixed Carbon ◽  
Gross Calorific Value ◽  
Energy Value ◽  
Combustion Properties ◽  
Fuel Material

Aims: The study explored the combustion properties of woods and barks of some selected trees and the mixtures of the two in order to map out how fuel material composition affect the combustion properties of biomass materials. Study Design: The study is a two-factor factorial experiment in a completely randomized design. The main factors are the tree species and fuel material types. Place and Duration of Study: Tree samples used for this study were coppiced stems harvested from smallhold farm plots along the Damaturu - Gujba fuelwood corridors in Yobe State. The analytical study was carried out in Wood and Fibre Science Laboratory of the Department of Forestry and Wildlife, University of Maiduguri, Nigeria between April 2018 and December 2019. Methodology: Ten tree species were used for this study. Each species was replicated 3-times, making a total of 30 stems with their dbh between 10 and 15 cm. A sample billet of 20 cm log was cut from each stem at 10 cm below and above dbh. Each billet was debarked, chipped separately and dried to approximately 12% moisture content. From the chips, 100% wood, 95%W-5%B, 90%W-10%B and 100% bark fuel material samples were created, grinded with mechanical grinder and sieved to approximately 0.4 mm particle size based on ASTM D2013-86. The sieved samples obtained were then analyzed for their percentage moisture content, volatile matter, fixed carbon, ash and gross calorific values using ASTM standard methods. The data obtained were subjected to Analysis of variance from which % variance component and LSD were computed α = 0.05 and 0.01 level of significance. Results: All the measured parameters varied significantly among the tree species and the compositions of the fuel materials obtained from them. Majority of the variation in the fuelwood properties were attributed to the composition of the fuel materials obtained from the trees rather than the species they were made of. On the average, moisture content of the samples ranged from 27.66 to 40.44%, volatile matter (61.38 to 75.11%), ash (0.52 to 2.42%), fixed carbon (24.19 to 36.20%) and gross calorific value (32.99 to 33.02 MJ.kg-1). The moisture and ash contents of the fuel materials obtained from all the tree species increased with the level of bark inclusion whereas, volatile matter content and gross calorific values decreased significantly with level of bark inclusion (P < 0.05). Also, gross calorific value of the fuel materials correlates positively with volatile matter and fixed carbon contents. But, correlate negatively with moisture and ash contents. Among the studied tree species, chips obtained from A. leiocarpus had the highest energy value, followed by C. arereh and B. aegyptiaca while P. reticulatum, A. sieberiana and C. lamprocarpum had the least energy value in that order. Conclusion: Based on their energy value and ash content, minimizing the bark content in wood chips is important from energy and environment point of view. Therefore, chips with 100% wood and those with 5% bark inclusions are recommended for heat generation.

DEVELOPMENT OF PALM BIOMASS BRIQUETTES WITH POLYETHYLENE PLASTIC WASTE ADDITION

2016 ◽  
Vol 78 (9-2) ◽  
Author(s):  
Hasan Mohd Faizal ◽  
M. Shafiq M. Nazri ◽  
Md. Mizanur Rahman ◽  
S. Syahrullail ◽  
Z. A. Latiff
Keyword(s):  
Compressive Strength ◽  
Renewable Energy ◽  
Moisture Content ◽  
Renewable Energy Sources ◽  
Calorific Value ◽  
Energy Sources ◽  
Mixing Ratio ◽  
Gross Calorific Value ◽  
Combustion Properties ◽  
Plastics Waste

High global energy demand scenario has driven towards transformation from sole dependence on fossil fuels to utilization of inexhaustible renewable energy sources such as hydro, biomass, solar and wind. Renewable energy sources are abundant in Malaysia, especially palm biomass residues that are produced during the oil extraction process of fresh fruit bunch. Therefore, it is inevitable to harness these bioenergy sources, in order to prevent waste accumulation at adjacent to palm mills. Briquetting of palm biomass such as empty fruit bunch (EFB) with polyethylene (PE) plastics waste addition is expected not only could maximize the utilization of energy resources, but also could become as a potential solution for residue and municipal plastics waste disposal. In the present study, the physical and combustion properties of palm biomass briquettes that contain novel mixture of pulverized EFB and PE plastics waste were investigated experimentally. The briquettes were produced with different mixing ratio of EFB and PE plastics (weight ratios of 95:5, 90:10 and 85:15), under various heating temperatures (130-190 ) and at constant compaction pressure of 7 MPa. Based on the results, it can be said that heating temperature plays a significant role in affecting physical properties such as relaxed density and compressive strength. The values of relaxed density and compressive strength are within the range of 1100 to 1300 kg/m3 and 0.8 to 1.2 MPa, respectively. Meanwhile, mixing ratio does affect relaxed density and gross calorific value. All values of gross calorific (17900 to 21000 kJ/kg) and moisture content (7% to 9%) are found to fulfill the requirement for commercialization as stated by DIN51731 (gross calorific value>17500 kJ/kg and moisture content<10%). Even though the values of ash content (3% to 4%) exceed the limitation as stated by the standard (<0.7%), it is still considered very competitive if compared to the commonly used local briquette that contains mesocarp fibre and shell (5.8%). Finally, it can be concluded that the best quality of briquette can be achieved when highest composition of PE plastics (weight percentage of 15%) is used and the briquetting process is performed at the highest temperature (190 ).  

Improvement of Combustion Quality of Biomass Briquette from Water Hyacinth (Eichhornia crassipes) for Alternative Energy

2019 ◽  
Vol 2 (1) ◽  
pp. 1-7
Author(s):  
Andre Nugraha Pramadhana ◽  
Diah Indriani Widiputri ◽  
Gustan Pari
Keyword(s):  
Carbon Content ◽  
Water Hyacinth ◽  
Alternative Energy ◽  
Eichhornia Crassipes ◽  
Aquatic Vegetation ◽  
Calorific Value ◽  
Combustion Characteristic ◽  
Fixed Carbon ◽  
Promising Alternative ◽  
Fixed Carbon Content

Water hyacinth (Eichhornia crassipes) is a floating plant species, which spreads rapidly in fresh water area. This plant has found to cause environmental problems, such as clogging drainage, water intakes, and ditches, shading out other aquatic vegetation and interfering with fishing, shipping as well as recreational activities. In contrast to its drawbacks, water hyacinth is considered as one of the potential agricultural wastes in Indonesia that can be processed into an alternative solid fuel. Carbonization followed by briquetting is one of the methods that can be applied to process biomass into solid fuels. This work investigated the effect of carbonization temperature and two different types of binders on combustion characteristic of water hyacinth biomass. In this work, carbonization was carried out at three different temperatures, i.e. 350oC, 400oC and 450oC, while comparing the application of two types of binders, which were tapioca gel and polyvinyl acetate (PVAc) adhesive. The results showed that carbonization process of water hyacinth increased the fixed carbon content and the calorific value, and the best result was obtained at 450oC with tapioca gel as the binder. With this condition, the fixed carbon content in the biomass briquette could be increased up to 34.14% with a calorific value of 3,837 kcal/kg. Although the combustion efficiency was only 4.89%. The application of water hyacinth as biomass briquette has shown a promising alternative to reduce CO emission and the above-mentioned environment problems.

scholarly journals COMPARATIVE STUDIES OF PHYSICAL AND COMBUSTION CHARACTERISTICS OF RICE HUSK BRIQUETTES PRODUCED USING DIFFERENT BINDING AGENTS

2020 ◽  
Vol 7 (7) ◽  
pp. 183-190
Author(s):  
J. Sani ◽  
T. Abubakar ◽  
M. Mawoli
Keyword(s):  
Compressive Strength ◽  
Carbon Content ◽  
Thermal Efficiency ◽  
Ignition Time ◽  
Gum Arabic ◽  
Calorific Value ◽  
Volatile Matter ◽  
Fixed Carbon ◽  
Water Boiling Test ◽  
Fixed Carbon Content

Briquettes samples were manually produced using a hydraulic press from rice husk using starch and gum Arabic resin as binders. The proximate analysis of the samples reveals that the briquette produced using starch binder has the moisture value (9.26±0.251), Ash (16.29±0.172), Volatile matter (64.17±0.306), and fixed carbon content of (9.55±0.502) respectively whereas the gum Arabic bonded briquette has the moisture value (10.68±0.214), Ash (19.89±0.775), Volatile matter (60.84±0.250), and fixed carbon content of (8.26±0.535) respectively. The physical characteristics of the samples shows that the starch bonded briquette has the compressive strength of (0.668± 0.012 N/mm2), density (0.68±0,028 g/cm3), ignition time (0.17±0.01 cm/s), afterglow (313±6.123 sec), and calorific value (10.35±0.135 MJ/Kg) respectively whereas the gum Arabic bonded briquette has the compressive strength of (0.559±0.031 N/mm2), density (0.575±0.031 g/cm3), ignition time (0.13±0.007 cm/s), afterglow (187±7.035 sec), and calorific value (9.47±0.095 MJ/Kg) respectively. Water boiling test shows that both the starch and gum Arabic bonded briquettes boil water to 1000C at 18 and 22 minutes respectively. The thermal efficiency of the briquettes during water boiling test shows that the starch bonded briquette has the highest thermal efficiency.

scholarly journals Potential of Briquette Produced with Torrefied Agroforestry Biomass to Generate Energy

Forests ◽  
2020 ◽  
Vol 11 (12) ◽  
pp. 1272
Author(s):  
Gabriel Reis Portilho ◽  
Vinicius Resende de Castro ◽  
Angélica de Cássia Oliveira Carneiro ◽  
José Cola Zanuncio ◽  
Antonio José Vinha Zanuncio ◽  
...  
Keyword(s):  
Energy Density ◽  
Sugarcane Bagasse ◽  
Compaction Pressure ◽  
Calorific Value ◽  
High Energy ◽  
Raw Material ◽  
High Energy Density ◽  
Fixed Carbon ◽  
Volatile Material ◽  
Material Content

Agroforestry industries, such as sugar-alcohol, food, and logging, produce large quantities of waste, used to generate energy from direct burning. The application of other processes, such as torrefaction and briquetting, can increase the profits from the use of agro-industrial waste for energy generation. Briquetting is an alternative for using these wastes, allowing the compaction of the biomass, generating a biofuel with high energy density, and which is more homogeneous and easier to store and transport. The objective of this study was to evaluate the physical and chemical properties of four biomass types (wastes from sawed eucalypt and pine wood, coffee pruning wastes, and sugarcane bagasse) torrefied at 300 °C and compacted (briquetting) at pressures of 6.21, 8.27, and 10.34 MPa. The torrefaction increased the fixed carbon content, ash, and calorific value, and reduced the volatile material content and hygroscopic equilibrium moisture of the biomasses. The volatile material content was lower and the fixed carbon higher in the coffee pruning waste, the ash content higher in the sugarcane bagasse, and the calorific value higher in the pine and eucalypt wood. The briquetting and the torrefaction processes increased the biomass bulk density, and the useful calorific value, respectively, and consequently the energy density of the briquettes produced with torrefied raw material under high pressure. The mechanical properties of the briquettes produced with all materials increased with the compaction pressure. Torrefaction and briquetting increased the energy potential of the biomasses evaluated to produce energy from clean technology.

scholarly journals BIOBRIQUETTE PRODUCTION FROM PALM FRONDS AND SHELLS: EFFECT OF MATERIAL COMPOSITION AND PARTICLE SIZE

2018 ◽  
Vol 7 (1) ◽  
pp. 28-33
Author(s):  
Okta Bani ◽  
Iriany ◽  
Taslim ◽  
Cici Novita Sari ◽  
Cindy Carnella
Keyword(s):  
Particle Size ◽  
Compressive Strength ◽  
Carbon Content ◽  
Water Content ◽  
Combustion Rate ◽  
Calorific Value ◽  
Ash Content ◽  
Raw Material ◽  
Fixed Carbon ◽  
Fixed Carbon Content

Briquettes are solid fuels from organic materials with high calorific values ​​and burn duration. The composition and particle size of the raw material may affect briquette quality. This study aimed to evaluate the effect of composition and particle size on calorific value and characteristics of the resulting briquettes. In this study, briquettes were made using palm oil fronds and shells at mass ratio of 1:2, 1:4, 1:6, 1:8 and particle size of not-dertemined, 50, 70, and 100 mesh. First, raw material was carbonized at 450°C for 30 minutes then added to 20%wt. starch glue and waste oil (1:1 ratio). Resulting briquettes were analyzed for its water content, ash content, density, volatile matter content, fixed carbon content, combustion rate, calorific value, and compressive strength. Satisfying results were obtained for briquettes with a front to shell ratio of 1:8, and a particle size of 100 mesh. At this condition, the resulting briquettes have water content of 5.5%; ash content of 2.54%; density of 0.51 g/cm3; 19.58% vapor content; fixed carbon content of 72.38%; combustion rate of 0.2 g/min (3.4×10-3 g/sec); calorific value of 15.3 kcal/g; and compressive strength of 0.06 N/mm2. These results have complied with the Indonesian National Standard (SNI), Japanese, American, and English standards, except for briquette compressive strength, which have not met the industrial standard.

Sign in / Sign up

Export Citation Format

Share Document