CHARACTERIZATION OF PHOTOCHEMICALLY INITIATED GOLD NANOPARTICLES SYNTHESIZED VIA INCOHERENT ULTRAVIOLET RADIATION

2016 ◽  
Vol 78 (3-2) ◽  
Author(s):  
Jia-Cherng Chong ◽  
Siew-Ling Lee ◽  
Noriah Bidin
Keyword(s):  
Gold Nanoparticles ◽  
Ultraviolet Radiation ◽  
Average Particle Size ◽  
Correlation Spectroscopy ◽  
Average Particle ◽  
Nanoparticle Growth ◽  
Particle Stability ◽  
Ultraviolet Wavelength ◽  
Post Synthesis

A modified Turkevich pathway of synthesizing water suspended gold nanoparticles using incoherent ultraviolet radiation as photochemical reaction initiator produced broader absorbance band corresponding to localised surface plasmonresonsnce around 530 nm with average particle size separated into two distinct distributions from 5 nm to 100 nm depending on ultraviolet wavelength. Presence and dynamics of nanoparticle growth was observed with photon correlation spectroscopy where aged colloids produced submicron sized agglomerated particles. Post-synthesis colloidal pH shows gradual degradation of particle stability.  

Synthesis and Characterization of Water-Soluble Monolayer-Protected Gold Nanoparticles

2011 ◽  
Vol 415-417 ◽  
pp. 617-620 ◽  
Author(s):  
Yan Su ◽  
Ying Yun Lin ◽  
Yu Li Fu ◽  
Fan Qian ◽  
Xiu Pei Yang ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Particle Size ◽  
Gold Nanoparticles ◽  
Average Particle Size ◽  
Water Soluble ◽  
Synthesis And Characterization ◽  
Average Particle ◽  
Transmission Electron

Water-soluble gold nanoparticles (AuNPs) were prepared using 2-mercapto-4-methyl-5- thiazoleacetic acid (MMTA) as a stabilizing agent and sodium borohydride (NaBH4) as a reducing agent. The AuNPs product was analyzed by transmission electron microscopy (TEM), UV-vis absorption spectroscopy and Fourier transform infrared spectroscopy (FTIR). The TEM image shows that the particles were well-dispersed and their average particle size is about 5 nm. The UV-vis absorption and FTIR spectra confirm that the MMTA-AuNPs was stabilized by the carboxylate ions present on the surface of the AuNPs.

Preparation and Characterization of Gold Nanoparticles in the Presence of Citrate and Soybean Seed Extract in an Acidic Conditions

Drug Research ◽  
2017 ◽  
Vol 67 (05) ◽  
pp. 266-270 ◽  
Author(s):  
Ebrahim Izadi ◽  
Ali Rasooli ◽  
Abolfazl Akbarzadeh ◽  
Soodabeh Davaran
Keyword(s):  
Particle Size ◽  
Gold Nanoparticles ◽  
Size Distribution ◽  
Average Particle Size ◽  
Soybean Seed ◽  
Average Particle ◽  
X Ray Diffraction ◽  
Soybean Extract ◽  
Average Size

AbstractThrough the present study, an eco-friendly method was used to synthesize the gold nanoparticles (GNPs) by using the sodium citrate and extract of the soybean seed as reducing the agents at PH 3. X-Ray diffraction (XRD) method was used to evaluate the crystal structure of as-synthesized NPs and it’s revealed that this method leads to well crystallized GNPs. In order to determine the particle size and their distribution, field emission scanning microscopy (FE-SEM) and dynamic light scattering (DLS) were used. The results showed that, the average particle size distribution of synthesized GNPs in solutions containing of the soybean extract and 1% citrate at PH 3 is about 109.6 and 140.9 nm, respectively. Also, we find that the average size of GNPs is 40 and 33 nm from solutions of citrate and soybean extract, respectively. It was concluded that using the extract of soybean seeds as reducing agent can lead to GNPs with small size and narrow size distribution.

scholarly journals BIOSYNTHESIS AND CHARACTERIZATION OF GOLD NANOPARTICLES AND THEIR INTERACTION STUDY WITH METFORMIN

2020 ◽  
Vol 21 (2) ◽  
pp. 56
Author(s):  
Dian Anggraini ◽  
Siti Suhartati ◽  
Iwan Syahjoko Saputra ◽  
Sudirman Sudirman
Keyword(s):  
Particle Size ◽  
Gold Nanoparticles ◽  
Leaf Extract ◽  
Average Particle Size ◽  
Synthesis Method ◽  
Spherical Shape ◽  
Imperata Cylindrica ◽  
Average Particle ◽  
Interaction Study

BIOSYNTHESIS AND CHARACTERIZATION OF GOLD NANOPARTICLES AND THEIR INTERACTION STUDY WITH METFORMIN. Synthesis of gold nanoparticles successfully carried using Imperata cylindrica L leaf extract. In this study, the approach used through green synthesis method is a reaction betwen of the HAuCl4 solution (concentration variation as 3; 5; 7 x 10-4 M) with Imperata cylindrica L leaf extract. Results of UV-Vis showed of gold nanoparticles has a maximum wavelength at 530 nm with absorbance value of 1.4. Results of FTIR shows a shift the absorption peak at wavenumber of 3392 cm-1 to 3404 cm-1. PSA and PZC showed the distribution of gold nanoparticles was 48.84 nm with a charge of 20.5 mV. Gold nanoparticles has a spherical shape and an average particle size of 20 nm which can be seen from the results of the characterization using TEM. XRD showed crystalize size average of gold nanoparticles as 20.47 nm. The interaction between of gold nanoparticles with metformin can be seen in the absorbance decrease of 0.38 at a wavelength of 531 nm and the results of PSA shows an average particle size of AuNPs@metformin is 122 nm. From the characterization data can be concluded the gold nanoparticles were successfully synthesized using natural bioreductors by utilizing secondary metabolites from Imperata cylindrica L leaf extract.

scholarly journals Comparative Study of Bulk and Nanoengineered Doped ZnSe

Crystals ◽  
2022 ◽  
Vol 12 (1) ◽  
pp. 71
Author(s):  
Brett Setera ◽  
Ching-Hua Su ◽  
Bradley Arnold ◽  
Fow-Sen Choa ◽  
Lisa Kelly ◽  
...  
Keyword(s):  
Zinc Selenide ◽  
Average Particle Size ◽  
Average Particle ◽  
Bulk Crystals ◽  
Cobalt Doping ◽  
Nanoparticle Growth ◽  
Chromium Doping ◽  
Growth Method ◽  
Order Of Magnitude

Chromium- and cobalt-doped zinc selenide nanoparticles were synthesized using a low-temperature reactive solution growth method. The morphological and optical characteristics were compared to those of doped zinc selenide (ZnSe) bulk crystals grown by the physical vapor transport (PVT) method. We observed agglomeration of particles; however, the thioglycerol capping agent has been shown to limit particle grain growth and agglomeration. This process enables doping by addition of chromium and cobalt salts in the solution. A slightly longer refluxing time was required to achieve cobalt doping as compared with chromium doping due to lower refluxing temperature. The nanoparticle growth process showed an average particle size of approximately 300 nm for both Cr- and Co-doped zinc selenide. The optical characterization of Co:ZnSe is ongoing; however, preliminary results showed a very high bandgap compared to that of pure ZnSe bulk crystal. Additionally, Co:ZnSe has an order of magnitude higher fluorescence intensity compared to bulk Cr:ZnSe samples.

scholarly journals Synthesis of Gold Nanoparticles by Using Green Machinery: Characterization and In Vitro Toxicity

Nanomaterials ◽  
2021 ◽  
Vol 11 (3) ◽  
pp. 808
Author(s):  
Ahmed Al Saqr ◽  
El-Sayed Khafagy ◽  
Ahmed Alalaiwe ◽  
Mohammed F. Aldawsari ◽  
Saad M. Alshahrani ◽  
...  
Keyword(s):  
Gold Nanoparticles ◽  
Average Particle Size ◽  
In Vitro Cytotoxicity ◽  
In Vitro Toxicity ◽  
Cervical Cancer Cell Line ◽  
Average Particle ◽  
Anticancer Activities ◽  
Tem Analysis ◽  
Benincasa Hispida

Green synthesis of gold nanoparticles (GNPs) with plant extracts has gained considerable interest in the field of biomedicine. Recently, the bioreduction nature of herbal extracts has helped to synthesize spherical GNPs of different potential from gold salt. In this study, a fast ecofriendly method was adopted for the synthesis of GNPs using fresh peel (aqueous) extracts of Benincasa hispida, which acted as reducing and stabilizing agents. The biosynthesized GNPs were characterized by UV–VIS and Fourier transform infrared spectroscopy, transmission electron microscopy (TEM), and dynamic light scattering. In addition, the in vitro antibacterial and anticancer activities of synthesized GNPs were investigated. The formation of gold nanoparticles was confirmed by the existence of a sharp absorption peak at 520 nm, corresponding to the surface plasmon resonance (SPR) band of the GNPs. TEM analysis revealed that the prepared GNPs were spherical in shape and had an average particle size of 22.18 ± 2 nm. Most importantly, the synthesized GNPs exhibited considerable antibacterial activity against different Gram-positive and Gram-negative bacteria. Furthermore, the biosynthesized GNPs exerted remarkable in vitro cytotoxicity against human cervical cancer cell line, while sparing normal human primary osteoblast cells. Such cytotoxic effect was attributed to the increased production of reactive oxygen species (ROS) that contributed to the damage of HeLa cells. Collectively, peel extracts of B. hispida can be efficiently used for the synthesis of GNPs, which can be adopted as a natural source of antimicrobial and anticancer agent.

scholarly journals Preparation and characterization of domperidone nanoparticles for dissolution improvement

2018 ◽  
Vol 27 (1) ◽  
pp. 39-52
Author(s):  
Mohammed Sabar Al-lami ◽  
Malath H. Oudah ◽  
Firas A. Rahi
Keyword(s):  
Particle Size ◽  
Average Particle Size ◽  
In Vitro Release ◽  
Methyl Cellulose ◽  
Precipitation Method ◽  
Average Particle ◽  
Antisolvent Precipitation ◽  
Stirring Time

This study was carried out to prepare and characterize domperidone nanoparticles to enhance solubility and the release rate. Domperidone is practically insoluble in water and has low and an erratic bioavailability range from 13%-17%. The domperidone nanoparticles were prepared by solvent/antisolvent precipitation method at different polymer:drug ratios of 1:1 and 2:1 using different polymers and grades of poly vinyl pyrolidone, hydroxy propyl methyl cellulose and sodium carboxymethyl cellulose as stabilizers. The effect of polymer type, ratio of polymer:drug, solvent:antisolvent ratio, stirring rate and stirring time on the particle size, were investigated and found to have a significant (p? 0.05) effect on particle size. The best formula was obtained with lowest average particle size of 84.05. This formula was studied for compatibility by FTIR and DSC, surface morphology by FESEM and crystalline state by XRPD. Then domperidone nanoparticles were formulated into a simple capsule dosage form in order to study of the in vitro release of drug from nanoparticles in comparison raw drug and mixture of polymer:drug ratios of 2:1. The release of domperidone from best formula was highly improved with a significant (p? 0.05) increase.

CONTROLLED SYNTHESIS AND CHARACTERIZATION OF CERIUM-DOPED ZnS NANOPARTICLES IN HMTA MATRIX

2011 ◽  
Vol 10 (03) ◽  
pp. 487-493 ◽  
Author(s):  
K. VIJAI ANAND ◽  
R. MOHAN ◽  
R. MOHAN KUMAR ◽  
M. KARL CHINNU ◽  
R. JAYAVEL
Keyword(s):  
Quantum Confinement Effect ◽  
Average Particle Size ◽  
Surface States ◽  
Deep Trap ◽  
Average Particle ◽  
Zns Nanoparticles ◽  
Selected Area Electron Diffraction ◽  
Luminescence Process ◽  
Photoluminescence Studies

Cerium-doped ZnS nanoparticles have been synthesized through hydrothermal method. The nanoparticles were stabilized using hexamethylenetetramine (HMTA) as surfactant in aqueous solution. The average particle size of the prepared samples is about 2 nm. The structure of the as-prepared ZnS nanoparticles is cubic (zinc blende) as demonstrated by X-ray powder diffraction (XRD) and selected area electron diffraction (SAED) analysis. TEM results showed that the synthesized nanoparticles were uniformly dispersed in the HMTA matrix without aggregation. The UV–Vis absorption spectra of the prepared ZnS nanoparticles show a considerable blueshift in the absorption band edge compared to bulk ZnS indicating a strong quantum confinement effect. Formation of HMTA-capped ZnS nanoparticles was confirmed by FTIR studies. Photoluminescence studies showed that the relative emission intensity of Ce3+ -doped ZnS nanoparticles is higher than that of undoped ZnS nanoparticles, which is due to the enhancement of radiative recombination in the luminescence process. The PL spectra showed two emission peaks at around 420 nm and 442 nm, which may be attributed to deep-trap emission or defect-related emission of ZnS and presence of various surface states.

The Aggregation Study and Characterization of Silver Nanoparticles

2017 ◽  
Vol 263 ◽  
pp. 165-169
Author(s):  
Silvia Chowdhury ◽  
Faridah Yusof ◽  
Nadzril Sulaiman ◽  
Mohammad Omer Faruck
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Particle Size ◽  
Silver Nanoparticles ◽  
Absorption Spectrum ◽  
Average Particle Size ◽  
Average Particle ◽  
Transmission Electron ◽  
Vis Spectroscopy

In this article, we have studied the process of silver nanoparticles (AgNPs) aggregation and to stop aggregation 0.3% Polyvinylpyrrolidone (PVP) was used. Aggregation study carried out via UV-vis spectroscopy and it is reported that the absorption spectrum of spherical silver nanoparticles were found a maximum peak at 420 nm wavelength. Furthermore, Transmission Electron Microscopy (TEM) were used to characterized the size and shape of AgNPs, where the average particle size is around 10 to 25 nm in diameter and the AgNPs shape is spherical. Next, Dynamic Light Scattering (DLS) were used, owing to observed size distribution and self-correlation of AgNPs.

FABRICATION AND CHARACTERIZATION OF AQUEOUS SOL–GEL-DERIVED LaFeO3 THIN FILMS

2000 ◽  
Vol 14 (22n23) ◽  
pp. 801-808 ◽  
Author(s):  
M. RAJENDRAN ◽  
M. GHANASHYAM KRISHNA ◽  
A. K. BHATTACHARYA
Keyword(s):  
Thin Films ◽  
Single Phase ◽  
Annealing Temperature ◽  
Sol Gel ◽  
Average Particle Size ◽  
Optical Transmittance ◽  
Dip Coating ◽  
Correlation Spectroscopy ◽  
Average Particle ◽  
X Ray

A novel all-inorganic aqueous sol–gel process has been developed to fabricate LaFeO3 thin films by dip-coating. Stable, positively charged colloidal sol particles of hydrous lanthanum ferrite with an average particle size (Z av ) of 7 nm were prepared and coated onto quartz plates under controlled conditions. The sols have been characterized using photon correlation spectroscopy (PCS) for Z av and size distribution. The redispersible gel was characterized by thermogravimetric and differential thermal analysis (TG-DTA) and also by isothermal heating followed by X-ray diffraction to identify the reaction sequence to form LaFeO 3. The sol–gel films as deposited were X-ray amorphous on heating up to 500°C, partially crystalline at 600°C, fully crystalline and single phase at 650°C and above. These films were continuous, polycrystalline, single phase, had uniform thickness in the range between 180 to 1000 nm, depending on deposition conditions, and showed about 80% optical transmittance. The optical band gap varied from 2.7 to 3.3 eV as a function of the annealing temperature. The refractive index increased with increase in annealing temperature from 1.55 at 500°C to 1.86 at 800°C.

Sign in / Sign up

Export Citation Format

Share Document