EFFECTS OF AIR INTAKE TEMPERATURE ON THE FUEL CONSUMPTION AND EXHAUST EMISSIONS OF NATURAL ASPIRATED GASOLINE ENGINE

2015 ◽  
Vol 76 (9) ◽  
Author(s):  
Nik Rosli Abdullah ◽  
Hazimi Ismail ◽  
Zeno Michael ◽  
Asiah Ab. Rahim ◽  
Hazim Sharudin
Keyword(s):  
Fuel Consumption ◽  
Oxygen Concentration ◽  
Gasoline Engine ◽  
Exhaust Emissions ◽  
Exhaust Emission ◽  
Engine Fuel ◽  
Mixing Process ◽  
Gas Analyzer ◽  
Complete Combustion ◽  
Air Intake

Improving fuel consumption with lower exhaust emissions give more focused to all car manufactures. A higher engine performance with lower exhaust emissions requires a complete mixing process resulted in ultra-lean high combustion efficiency. Air intake temperature is one of the alternative strategies to improve fuel consumption and reduced exhaust emissions. This is due to the cold air is denser and contain higher oxygen availability. Air intake temperature will affect to the oxygen concentration in the charged air that influence the combustion process through ignition delay and fuel burning rate. The objective of this experiment is to investigate the effects of air intake temperature to the fuel consumption and exhaust emission at variation of engine speeds and constant load by using 1.6L gasoline engine. Air intake temperature was changed from 20 °C to 30 °C. The DaTAQ Pro V2 software was used to measure the engine fuel consumption while gas analyzer (MRU Gas Analyzer) was used to measure the exhaust emission such as Unburned hydrocarbons (UHCs) and carbon monoxide (CO). The results showed that fuel consumption, UHCs and CO emissions increased with the increase of air intake temperature. The increase of air intake temperature resulted in advanced and shorter combustion duration. Higher oxygen concentration at lower air intake temperature leads to the complete mixing process and complete combustion.  Therefore, the experimental results can be concluded that the lower air intake temperature resulted in improved fuel consumption and reduced UHCs and CO emissions.

scholarly journals Analisis emisi gas buang dan daya sepeda motor pada volume silinder diperkecil

2018 ◽  
Vol 8 (1) ◽  
Author(s):  
I Made Mara ◽  
I Made Adi Sayoga ◽  
IGNK Yudhyadi ◽  
I Made Nuarsa
Keyword(s):  
Data Analysis ◽  
Fuel Consumption ◽  
Co2 Emissions ◽  
Co2 Emission ◽  
Gasoline Engine ◽  
Exhaust Emissions ◽  
Exhaust Emission ◽  
Gas Analyzer ◽  
Hc Emissions ◽  
Co Emission

This research aims to determine the effect of variations diameter pistons on exhaust emissions and fuel consumption. This research used a gasoline engine single-cylinder four-stroke  with variations in cylinder volume 100 cc, 90 cc, 60 cc and engine rotation  1500 rpm, 2500 rpm, 3500 rpm, 4500 rpm, 6000 rpm. Data was collected in transmission N, 1, 2, 3, and 4 each of the three repetitions for each round engine rotation, using a gas analyzer 2400 ultra 4/5 IM Hanatech brand for exhaust emission of CO and HC. Based on data analysis, it can be concluded that with decreasing diameter of piston up to 60 cc can reduce exhaust emissions, especially CO, HC and fuel consumption. The highest HC exhaust emissions was in 100 cc cylinder volume that is equal to 514.33 ppm while the lowest HC emissions obtained in 60 cc cylinder volume at 49.67 ppm. The highest CO emission was obtained on 100 cc cylinder  by 4.64% volume, while the lowest CO emission was obtained on 60 cc cylinder by 0.31% volume. The highest CO2 emissions obtained in 60 cc cylinder amounted to 17.60% volume, while the lowest CO2 emission obtained at 100 cc cylinder  amounted to 8.37%  volume, and the highest fuel consumption obtained in 100 cc cylinder  at 0.65 kg/h, and the lowest fuel consumption obtained in 60 cc cylinder  by 0.06 kg/h.

scholarly journals Analisis emisi gas buang dan daya sepeda motor pada volume silinder diperkecil

2018 ◽  
Vol 8 (1) ◽  
pp. 8
Author(s):  
I.M. Mara ◽  
I.M.A. Sayoga ◽  
I.G.N.K. Yudhyadi ◽  
I.M. Nuarsa
Keyword(s):  
Data Analysis ◽  
Fuel Consumption ◽  
Co2 Emissions ◽  
Co2 Emission ◽  
Gasoline Engine ◽  
Exhaust Emissions ◽  
Exhaust Emission ◽  
Gas Analyzer ◽  
Hc Emissions ◽  
Co Emission

This research aims to determine the effect of variations diameter pistons on exhaust emissions and fuel consumption. This research used a gasoline engine single-cylinder four-stroke  with variations in cylinder volume 100 cc, 90 cc, 60 cc and engine rotation  1500 rpm, 2500 rpm, 3500 rpm, 4500 rpm, 6000 rpm. Data was collected in transmission N, 1, 2, 3, and 4 each of the three repetitions for each round engine rotation, using a gas analyzer 2400 ultra 4/5 IM Hanatech brand for exhaust emission of CO and HC. Based on data analysis, it can be concluded that with decreasing diameter of piston up to 60 cc can reduce exhaust emissions, especially CO, HC and fuel consumption. The highest HC exhaust emissions was in 100 cc cylinder volume that is equal to 514.33 ppm while the lowest HC emissions obtained in 60 cc cylinder volume at 49.67 ppm. The highest CO emission was obtained on 100 cc cylinder  by 4.64% volume, while the lowest CO emission was obtained on 60 cc cylinder by 0.31% volume. The highest CO2 emissions obtained in 60 cc cylinder amounted to 17.60% volume, while the lowest CO2 emission obtained at 100 cc cylinder  amounted to 8.37%  volume, and the highest fuel consumption obtained in 100 cc cylinder  at 0.65 kg/h, and the lowest fuel consumption obtained in 60 cc cylinder  by 0.06 kg/h.

The On-Road Exhaust Emissions from Vehicles Fitted with the Start-Stop System

2013 ◽  
Vol 390 ◽  
pp. 343-349 ◽  
Author(s):  
Jerzy Merkisz ◽  
Pawel Fuc ◽  
Piotr Lijewski ◽  
Andrzej Ziolkowski
Keyword(s):  
Diesel Engine ◽  
Fuel Consumption ◽  
Measurement System ◽  
Power Output ◽  
Gasoline Engine ◽  
Exhaust Emissions ◽  
The Other ◽  
Exhaust Emission ◽  
Traffic Conditions ◽  
Utility Vehicle

The paper describes the influence of the start-stop system on the exhaust emissions and fuel consumption. The tests were performed for two vehicles. The first one was a vehicle designed specifically to operate in city conditions. It was fitted with a gasoline engine of the displacement of 0.9 dm3 and maximum power output of 63.7 kW. The other vehicle was an SUV (Sports Utility Vehicle) fitted with a diesel engine of the displacement of 3.0 dm3. The measurements of the exhaust emission were carried out on the same route under actual traffic conditions. For the tests a portable exhaust emissions analyzer from the PEMS group SEMTECH DS was used (PEMS Portable Emissions Measurement System).

scholarly journals Honda Tiger 2000 Bike Engine Modification Test against Exhaust Emissions and Fuel Consumption

2021 ◽  
Vol 5 (1) ◽  
pp. 102-109
Author(s):  
Bahtiar Wilantara Bahtiar ◽  
Hamid Nasrullah ◽  
Atip Suwarno ◽  
Ahmad Nurkholis ◽  
R Chandra ◽  
...  
Keyword(s):  
Fuel Consumption ◽  
Exhaust Emissions ◽  
Exhaust Emission ◽  
Threshold Values ◽  
Gas Analyzer ◽  
Distance Ratio ◽  
Hc Emissions ◽  
Emission Threshold

This study aims to determine the effect of modification of the Honda Tiger 2000 on exhaust emissions of CO and HC. The method used is to modify the carburettor venturi piston and replace the rocker arm with a roller rocker arm. The exhaust emission test used a gas analyzer type SUKYOUNG SY-GA 401. The object of the study was a Honda Tiger 2000 motorcycle. The results showed that modification of the Honda Tiger 2000 motorcycle at idle, 1000 rpm, 1500 rpm, and 2000 rpm increased CO emissions but reduced HC emissions. Based on comparing the motorcycle emission threshold values for manufacture ≤ 2010, namely CO emissions exceeding 5.5% and HC emissions less than 2400 ppm.  Pertamax Turbo fuel consumption is more efficient than Pertalite with a distance ratio of 45 km requiring 1L Pertamax Turbo and 1.4L Petalite.

scholarly journals Analysis of exhaust emission measurements in rural conditions from heavy-duty vehicle

2020 ◽  
Vol 182 (3) ◽  
pp. 54-58
Author(s):  
Andrzej Ziółkowski ◽  
Paweł Fuć ◽  
Piotr Lijewski ◽  
Łukasz Rymaniak ◽  
Paweł Daszkiewicz ◽  
...  
Keyword(s):  
Fuel Consumption ◽  
Road Transport ◽  
Exhaust Emissions ◽  
Operating Conditions ◽  
Transport Sector ◽  
Exhaust Emission ◽  
Heavy Vehicles ◽  
Heavy Duty Vehicle ◽  
Emission Norm ◽  
Test Route

Road transport holds for the largest share in the freight transport sector in Europe. This work is carried out by heavy vehicles of various types. It is assumed that, in principle, transport should take place on the main road connections, such as motorways or national roads. Their share in the polish road infrastructure is not dominant. Rural and communal roads roads are the most prevalent. This fact formed the basis of the exhaust emissions and fuel consumption tests of heavy vehicles in real operating conditions. A set of vehicles (truck tractor with a semi-trailer) meeting the Euro V emission norm, transporting a load of 24,800 kg, was selected for the tests. The research was carried out on an non-urban route, the test route length was 22 km. A mobile Semtech DS instrument was used, which was used to measure the exhaust emissions. Based on the obtained results, the emission characteristics were determined in relation to the operating parameters of the vehicles drive system. Road emission, specific emission and fuel consumption values were also calculated.

Research on Variable Cylinders of the Tandem 4-Cylinder Gasoline Engine for Fuel Economy

2008 ◽  
Vol 20 (1) ◽  
pp. 75-81 ◽  
Author(s):  
Kouki Yamaji ◽  
◽  
Hirokazu Suzuki ◽  
Keyword(s):  
Fuel Consumption ◽  
Fuel Economy ◽  
Gasoline Engine ◽  
Combustion Engine ◽  
Electronic Control Unit ◽  
Control Unit ◽  
Engine Fuel ◽  
Electronic Control ◽  
The Difference ◽  
Predetermined Time

With progress in internal combustion engine fuel economy, variable cylinder systems have attracted attention. We measured fuel consumption in cylinder cutoff by stopping the injector alone, collected data changing the location and number of cutoff cylinders and when varying the cutoff cylinder, and compared the difference in fuel cost reduction. A transistor is inserted serially into the injector control circuit of the electronic control unit (ECU). By controlling the transistor via microcomputer, the injector is turned on or off independently from ECU control in obtain cylinder cutoff. The amount of fuel consumption is measured using enhancement mode of a failure diagnostic device based on the OBD II standard to collect injection time and rotational speed of the injector for a predetermined time and calculated based on this data. We confirmed that by stopping the injector alone, fuel consumption was reduced 6 to 22% and is reduced when the cutoff cylinder is varied.

Experimental and Theoretical Study of Injection Timing on Performance and Exhaust Emissions in a Port-Injected Gasoline Engine

2006 ◽  
Author(s):  
E. Movahednejad ◽  
F. Ommi ◽  
M. Hosseinalipour ◽  
O. Samimi
Keyword(s):  
Gasoline Engine ◽  
Fuel Injection ◽  
Engine Performance ◽  
Fuel Mixture ◽  
Exhaust Emissions ◽  
Operating Conditions ◽  
Exhaust Emission ◽  
Injection Timing ◽  
Intake Port ◽  
One Dimensional

For spark ignition engines, the fuel-air mixture preparation process is known to have a significant influence on engine performance and exhaust emissions. In this paper, an experimental study is made to characterize the spray characteristics of an injector with multi-disc nozzle used in the engine. The distributions of the droplet size and velocity and volume flux were characterized by a PDA system. Also a model of a 4 cylinder multi-point fuel injection engine was prepared using a fluid dynamics code. By this code one-dimensional, unsteady, multiphase flow in the intake port has been modeled to study the mixture formation process in the intake port. Also, one-dimensional air flow and wall fuel film flow and a two-dimensional fuel droplet flow have been modeled, including the effects of in-cylinder mixture back flows into the port. The accuracy of model was verified using experimental results of the engine testing showing good agreement between the model and the real engine. As a result, predictions are obtained that provide a detailed picture of the air-fuel mixture properties along the intake port. A comparison was made on engine performance and exhaust emission in different fuel injection timing for 2600 rpm and different loads. According to the present investigation, optimum injection timing for different engine operating conditions was found.

scholarly journals PENGARUH PENGATURAN MODE CO DAN RPM MESIN TERHADAP EMISI GAS BUANG SEPEDA MOTOR INJEKSI

2019 ◽  
Vol 2 (01) ◽  
pp. 27-30
Author(s):  
SUGENG PRAMUDIBYO PRAMUDIBYO
Keyword(s):  
Gasoline Engine ◽  
Exhaust Emissions ◽  
Exhaust Gas ◽  
Test Results ◽  
Gas Analyzer ◽  
Negative Effects ◽  
Gas Emission ◽  
Gas Emissions ◽  
Exhaust Gas Emissions ◽  
Co Gas

The high population in Indonesia has an impact on increasing the mobility of the population in work and activities, which is followed by the increased transportation facilities needed by the community. One of the negative effects of the increasing number of vehicles is the danger of exhaust emissions. One way to minimize the danger of exhaust gases is to regulate the mixture of air and fuel on the gasoline engine. In Yamaha injection motors there is a CO setting technology, this technology will have an impact on fuel use. The standard CO on a Yamaha motorbike is 0 and can be added or reduced (±) until it reaches 30. Increasing CO one strip will cause the fuel sprayed by the injector to be reduced by 0.05 cc. Examination of exhaust gas emissions is carried out using the Qrotect 401 Engine Gas Analyzer which is capable of measuring CO2, O2, CO, HC and Lamda. Based on the test results show that the lowest exhaust emissions are produced by the vehicle at 2500 rpm and in CO-30 mode settings, namely CO gas emissions of 0.49%. So we can conclude that the lowest exhaust gas emissions are produced by the vehicle at rpm 2500 with CO-30 settings. In addition to co mode settings, variations in engine rpm also affect exhaust emissions. In different modes but with different rpm the results will also be different. In the CO 10 mode setting with rpm 1400 CO gas emission is produced at 2.102 while at 2500 rpm is produced 0.821. So at rpm 2500 produced exhaust emissions lower than rpm 1400. There is a significant effect between CO mode settings and engine rpm on motorcycle exhaust emissions.

scholarly journals A Review of Comparative Study on The Effect of Hydroxyl Gas in Internal Combustion Engine (ICE) On Engine Performance and Exhaust Emission

2021 ◽  
Vol 87 (2) ◽  
pp. 1-16
Author(s):  
Amir Ridhuan ◽  
Shahrul Azmir Osman ◽  
Mas Fawzi ◽  
Ahmad Jais Alimin ◽  
Saliza Azlina Osman
Keyword(s):  
Fuel Consumption ◽  
Thermal Efficiency ◽  
Internal Combustion Engines ◽  
Engine Performance ◽  
Internal Combustion ◽  
Exhaust Emission ◽  
Compression Ignition ◽  
Compression Ignition Engine ◽  
Complete Combustion ◽  
Brake Power

This introductory study comes up with an innovative idea of using Hydroxyl gas as a fuel performance enhancer to reduce the natural sources and the overuse of fossil fuel resulting in increased pollution levels. Many researchers have used HHO gas to analyze gasoline and diesel in internal combustion engines. The main challenges of using HHO gas in engines have been identified as system complexity, safety, cost, and electrolysis efficiency. This article focuses on different performance reports and the emission characteristics of a compression ignition engine. As opposed to general diesel, this study found that using HHO gas improved brake power and torque. In all cases, an increase in braking thermal efficiency can be observed. This was due to the presence of hydrogen in HHO gas with higher calorific value than fossil fuels. At the same time, the fuel consumption unit of the engine was reduced, and the combined impact of hydrogen and oxygen helped to achieve complete combustion and improved the combustion capacity of the fuel when HHO gas was injected. The addition of HHO gas also improved the Brake Power (BP), Brake Torque (BT), Brake Specific Fuel Consumption (BSFC), and thermal efficiency while simultaneously reducing CO and HC formation. The rise in CO2 emissions represented the completion of combustion. Therefore, the usage of HHO gas in the Compression Ignition (CI) engine improved the engine performance and exhaust emissions.

Inherent Fuel Consumption and Exhaust Emission of the CNG–Petrol Bi–Fuel Engine Based at Non–Loaded Operation

2012 ◽  
Author(s):  
Rahmat Mohsin ◽  
Zulkefli Yaacob ◽  
Zulkifli Abdul Majid ◽  
Shameed Ashraf
Keyword(s):  
Natural Gas ◽  
Fuel Consumption ◽  
Experimental Approach ◽  
Exhaust Emission ◽  
Engine Fuel ◽  
Fuel System ◽  
Compressed Natural Gas ◽  
Fuel Ratio ◽  
Carbon Dioxide Co2 ◽  
Natural Gas Vehicle

Gas asli termampat (CNG) merupakan bahan api alternatif yang paling berjaya dan digunakan dengan meluas bagi kenderaan terkini yang berada di pasaran. Kenderaan pacuan petrol bagi tujuan ini biasanya dilengkapkan dengan kit penukar gas asli bagi membolehkan operasian dwi-bahan api di antara CNG dan petrol. Pendekatan secara uji kaji ini difokuskan ke atas penggunaan bahan api, emisi ekzos dan kos bahan api di antara operasian gas asli dan petrol. Rig ujian terdiri dari sebuah sistem enjin teksi dwi-bahan api menggunakan 1500 cc dengan 12 injap sistem karburetor adalah dibina khusus. Penggunaan bahan api dan emisi ekzos yang setara diperolehi pada kelajuan putaran seminit (rpm) enjin yang berbeza ketika operasian menggunakan bahan api CNG dan petrol secara berasingan. Pengoperasian rpm enjin tanpa bebanan diubahsuai dari kedudukan pegun kepada kedudukan melebihi 5000 rpm untuk memperolehi profil penggunaan bahan api dan emisi ekzos. Kedua-dua data yang diperolehi ini kemudiannya digunakan bagi mengira kadar udara bahan api enjin. Kesemua ketiga-tiga parameter yang diperolehi digunakan untuk membuat perbandingan terhadap operasian gas asli dan petrol. Pemerhatian yang dibuat menunjukkan kadar udara bahan api bermula dari 19 ke 16.3 bagi operasian petrol dan dari 40 ke 18.7 untuk operasian menggunakan gas asli. Emisi ketika operasian menggunakan CNG jelas menunjukkan penurunan ketara ke atas keluaran hidrokarbon (HC), karbon monoksida (CO), karbon dioksida (CO2) dan nitrogen oksida (NOx) dibandingkan dengan operasian menggunakan petrol. Dari segi kos, penggunaan CNG memberikan keuntungan melebihi 50% terhadap kesemua kelajuan rpm enjin jika dibandingkan dengan operasian menggunakan petrol. Kata kunci: NGV, enjin dwi–bahan api, pengunaan bahan api, emisi ekzos, CNG, gas asli Compressed natural gas (CNG) is the most successful and widely used alternative fuel for vehicles in the market today. Petrol fuelled vehicles are fitted with natural gas vehicle (NGV) conversion kit to enable bi-fuel operation between CNG and petrol. This experimental approach is focused on the fuel consumption, exhaust emission and fuel cost between natural gas and petrol operations. The specially constructed test rig comprises of the bi-fuel fuel system employed in the 1500 cc 12 valves carburettor engine NGV taxis. The inherent fuel consumption and corresponding exhaust emission are acquired at different engine revolution per minute (rpm) during petrol and CNG operation separately. The engine rpm operating without load is varied from idle to more than 5000 rpm to acquire the fuel consumption and exhaust emission profile. These two acquired data are then used to calculate the engine’s air fuel ratio. All three parameters acquired are used to conduct comparisons between petrol and natural gas operation. It is seen that the bi-fuel system operates with air fuel ratio ranging from 19 to 16.3 for petrol operation and ranges from 40 to 18.7 for natural gas operations. The emission during CNG operation clearly shows significant decrease in hydrocarbon (HC), carbon monoxide (CO), carbon dioxide (CO2) and nitrogen oxide (NOx) over the use of petrol. In terms of cost, the use of CNG provides savings exceeding 50% through all engine rpm compared to petrol non-loaded operations. Key words: NGV, bi–fuel engine, fuel consumption, exhaust emission, CNG, natural gas

Sign in / Sign up

Export Citation Format

Share Document