Effect of Aggregate Shape on the Properties of Asphaltic Concrete AC14

2014 ◽  
Vol 71 (3) ◽  
Author(s):  
Ramadhansyah Putra Jaya ◽  
Norhidayah Abdul Hassan ◽  
Mohd Zul Hanif Mahmud ◽  
Md. Maniruzzaman A. Aziz ◽  
Meor Othman Hamzah ◽  
...  
Keyword(s):  
Resilient Modulus ◽  
Testing Machine ◽  
Asphalt Mixture ◽  
Volumetric Properties ◽  
Asphaltic Concrete ◽  
Modified Bitumen ◽  
Stiffness Modulus ◽  
Aggregate Gradation ◽  
Aggregate Shape ◽  
The Impact

The objective of this study is to evaluate the effects of aggregate shape on volumetric properties of asphaltic concrete mixtures. The aggregate gradation of AC14 was prepared using granite aggregates crushed via compression and impact crushers. In this study, compression crusher was used to produce aggregates with flaky and elongated shape while the impact crusher was used to produce aggregates with a cubical shape. Modified bitumen, Styrene-Butadiene-Styrene (SBS) was used in preparing the specimens. The stability, density, voids in total mix, voids filled with bitumen, and voids in mineral aggregate of asphalt mixture specimens was investigated. In addition, the resilient modulus test with temperature of 25ºC and stiffness modulus test with temperature of 40ºC was carried out using the Universal Testing Machine in accordance with ASTM D4123 standard. The test results showed that the volumetric properties improved when cubical aggregate was introduced to the asphalt mixture. Moreover, the incorporation of geometrically cubical aggregates in asphalt mixture causes an increase in resilient and stiffness modulus compared to asphalt mixture prepared with irregularly aggregates.

Evaluation Of Volumetric Properties And Resilient Modulus Performance Of Nanopolyacrylate Polymer Modified Binder (NPMB) Asphalt Mixes

2015 ◽  
Vol 73 (4) ◽  
Author(s):  
Ekarizan Shaffie ◽  
Juraidah Ahmad ◽  
Ahmad Kamil Arshad ◽  
Dzraini Kamarun
Keyword(s):  
Resilient Modulus ◽  
Asphalt Mixture ◽  
Asphalt Mixtures ◽  
Volumetric Properties ◽  
Modified Bitumen ◽  
Asphalt Mixes ◽  
Different Types ◽  
Potential Benefits ◽  
Modified Binder ◽  
Polymer Modified Bitumen

This paper presents the potential benefits of nanopolyacrylate (NPA) for the asphalt mixtures used on pavement. This research evaluates the resilient modulus performance of dense graded Superpave-designed HMA mix. Two different types of dense graded Superpave HMA mix were developed consists of unmodified bitumen mix (UMB) and nanopolyacrylate modified bitumen mix (NPMB). Nanopolyacrylate polymer modified bitumen was prepared from addition of 6 percent of NPA polymer into asphalt bitumen. Resilient modulus results from Resilient Modulus test were determined to evaluate the performance of these mixtures. Results showed that all the mixes passed the Superpave volumetric properties criteria which indicated that these mixtures were good with respect to durability and flexibility. The Resilient modulus result of NPMB demonstrates better resistance to rutting than those prepared using UMB mix. It was estimated that the average resilient modulus values for both UMB and NPMB mixtures are decreased by 80 percent when the test temperature increased from 25ºC to 40ºC.   In conclusion, the addition of NPA to the binder has certainly improved the bitumen properties significantly and hence increase the resistant to rutting of the asphalt mixture.

EVALUATING POTENTIAL OF DIATOMITE AS ANTI-CLOGGING AGENT FOR POROUS ASPHALT MIXTURE

2016 ◽  
Vol 78 (7-2) ◽  
Author(s):  
Nor Asniza Mohamed Abdullah ◽  
Norhidayah Abdul Hassan ◽  
Nurul Athma Mohd Shukry ◽  
Mohd Zul Hanif Mahmud ◽  
Ramadhansyah Putrajaya ◽  
...  
Keyword(s):  
Resilient Modulus ◽  
Asphalt Mixture ◽  
Permeability Test ◽  
Modified Bitumen ◽  
Fixed Amount ◽  
Aggregate Gradation ◽  
Porous Asphalt ◽  
Open Nature ◽  
Permeability Rate ◽  
Polymer Modified Bitumen

Clogging is a major problem that occurs throughout the service life of porous asphalt due to the open nature of the mixture itself. Diatomite with characteristic of abrasiveness and porous structure seems to have potential in order to remove the clogging materials that mainly consists of soils. This study aims to investigate the effects of diatomite as anti-clogging agent on the permeability rate and strength of porous asphalt. The porous asphalt samples were prepared using Malaysia aggregate gradation and polymer modified bitumen of PG76 was used as the binder. This study focuses on clay as the clogging material at different concentration. A fixed amount of 0.5 g/L diatomite was applied to the porous asphalt samples as an anti-clogging agent prior to clogging cycles. The permeability test and resilient modulus were then conducted at different clogging concentrations (0.5, 1.0, 1.5 g/L) and cycles, with and without diatomite. It was found that samples with diatomite have a higher permeability rate compared to those without any application of diatomite after a few clogging cycles. As the clogging cycles increase, the clogging materials have trapped and filled up the voids in the porous asphalt samples and increase the resilient modulus result.

The Performance of Styrene Butadiene Rubber on the Engineering Properties of Asphaltic Concrete AC14

2016 ◽  
Vol 700 ◽  
pp. 238-246 ◽  
Author(s):  
Dewi Sri Jayanti ◽  
Ramadhansyah Putra Jaya ◽  
Siti Aspalaili Mohamd Sharif ◽  
Norhidayah Abdul Hassan ◽  
Siti Nur Amiera Jeffry ◽  
...  
Keyword(s):  
Resilient Modulus ◽  
Asphalt Mixture ◽  
Engineering Properties ◽  
Styrene Butadiene Rubber ◽  
Butadiene Rubber ◽  
Asphaltic Concrete ◽  
Dynamic Creep ◽  
Creep Stiffness ◽  
And Performance ◽  
Styrene Butadiene

This study investigated the effects of adding various percentages of styrene–butadiene rubber (SBR) on the engineering properties and performance of asphaltic concrete. SBR was added into the mixture at 0%, 1%, 3%, and 5% on a mass-to-mass basis. Conventional bitumen used in this study was 80/100 PEN. The performances of SBR on the asphalt mixture properties were evaluated based on Marshall Stability, abrasion loss, resilient modulus, and dynamic creep test. Results indicated an improvement in the engineering properties and performance with the addition of SBR content. For instance, stability increased by 18.8% as the SBR content increased from 0% to 5%. Dynamic creep stiffness also increased by 46.2%. Similarly, the resilient modulus was also found to increase by approximately 84.6%.

Palm Kernel Shell as Partial Coarse Aggregate Replacement in Asphalt Mixture: Optimum Binder Content and Volumetric Properties Investigation

2021 ◽  
Vol 1047 ◽  
pp. 179-185
Author(s):  
Siti Zubaidah Mohd Asri ◽  
Faridah Hanim Khairuddin ◽  
Choy Peng Ng ◽  
Noor Aina Misnon ◽  
Nur Izzi Md Yusoff ◽  
...  
Keyword(s):  
Coarse Aggregate ◽  
Asphalt Mixture ◽  
Control Sample ◽  
Palm Kernel ◽  
Binder Content ◽  
Partial Replacement ◽  
Volumetric Properties ◽  
Aggregate Gradation ◽  
Palm Kernel Shell ◽  
Mixture Samples

Pavement failures such as fatigue, rutting, cracking, bleeding, and stripping are typical pavement deterioration. Researchers have been experimenting with pavement modification to overcome these problems. This study determines the optimum binder content (OBC) for modifying an asphalt mixture with a partial replacement of coarse aggregate (5mm-14mm sieve size) with palm kernel shell (PKS). A 60/70 penetration grade bitumen was mixed with 10, 20 and 30% PKS at selected aggregate gradation following the Public Work Department of Malaysia (JKR/SPJ/2008-S4) specification. The preparation of 60 samples of unmodified and modified asphalt mixture employed the Marshall Method compacted with 75 blows. The OBC was determined based on five volumetric properties of asphalt mixture namely stability, flow, bulk density, void filled with asphalt, and void in total mix. The OBC and volumetric properties of the modified PKS asphalt mixture samples were compared with unmodified asphalt mixture samples in accordance to the specification. Results showed that the OBC sample with 30% aggregate replacement produced the highest OBC value of 5.53% relative to the control sample with 5.40% OBC. The trend for OBC with PKS replacement begins with 10% PKS with 5.30% OBC, 20% PKS with 5.32% OBC and 30% PKS. All volumetric properties of the PKS samples are within the specification limit. Thus, PKS has a promising potential as a coarse aggregate replacement in asphalt mixture.

scholarly journals THE IMPACT OF AGEING ON THE BITUMEN STIFFNESS MODULUS USING THE CAM MODEL

2018 ◽  
Vol 13 (1) ◽  
pp. 34-39 ◽  
Author(s):  
Małgorzata CHOLEWIŃSKA ◽  
Marek IWAŃSKI ◽  
Grzegorz MAZUREK
Keyword(s):  
Complex Modulus ◽  
Surface Active Agent ◽  
Active Agent ◽  
Age Hardening ◽  
Fatty Amine ◽  
Modified Bitumen ◽  
Stiffness Modulus ◽  
The Impact ◽  
Cam Model

This article presents the results of the viscoelastic properties of the polymer-modified bitumen produced in Warm Mix Asphalt technology. A Fischer-Tropsch synthetic wax and a liquid surface-active agent (fatty amine) were used as bitumen viscosity-reducing modifiers. All tested parameters were determined after short-term and long-term ageing. The complex modulus G* and phase angle δ were measured with a cone-plate rheometer. All dynamic tests were performed at 60 °C within the frequency range from 0.005 Hz to 10 Hz. On the basis of the rheological index R determined using the Christensen−Anderson−Marasteanu (CAM) model, it was found that the fatty amine additive slowed down the age-hardening process in the bitumen. In contrast, the synthetic wax increased the stiffness of the bitumen at all levels tested, regardless of the type of ageing simulation process.

The Influence of Coconut Shell as Coarse Aggregates in Asphalt Mixture

2016 ◽  
Vol 700 ◽  
pp. 227-237 ◽  
Author(s):  
Siti Nur Amiera Jeffry ◽  
Ramadhansyah Putra Jaya ◽  
Norhafizah Manap ◽  
Nurfatin Aqeela Miron ◽  
Norhidayah Abdul Hassan
Keyword(s):  
Tensile Strength ◽  
Asphalt Concrete ◽  
Resilient Modulus ◽  
Asphalt Mixture ◽  
Indirect Tensile Strength ◽  
Coconut Shell ◽  
Engineering Properties ◽  
Modified Bitumen ◽  
Coarse Aggregates ◽  
Indirect Tensile

Significant quantities of coconut shell (CS), a by-product of agriculture, can be used as an artificial source of coarse aggregates. In this study, four CSs were used as coarse aggregates replacement in asphalt concrete with 0%, 10%, 20%, 30%, and 40% weight volumes. The particle sizes of the CSs used as main coarse aggregates range from 5 mm to 20 mm. The Marshall Stability test shows that the optimum bitumen content for asphalt mixtures is 5.1%. The engineering properties investigated include the volumetric, dynamic creep, indirect tensile strength, and resilient modulus. Test results show that stability decreases with increasing CS content because of high water absorption. Considering that CSs absorb bitumen, a further detailed investigation is needed to assess the performance of modified bitumen on mixture. Furthermore, the use of CSs as coarse aggregates in asphalt concrete help increase the resilient modulus, stiffness, and indirect tensile strength up to 30%. Generally, a 10% replacement of coarse aggregates with CSs is the optimal limit.

EVALUATION ON THE PERFORMANCE OF AGED ASPHALT BINDER AND MIXTURE UNDER VARIOUS AGING METHODS

2015 ◽  
Vol 77 (23) ◽  
Author(s):  
Mohd Khairul Idham ◽  
Mohd Rosli Hainin ◽  
M. Naqiuddin M. Warid ◽  
Noor Azah Abdul Raman ◽  
Rosmawati Mamat
Keyword(s):  
Permanent Deformation ◽  
Asphalt Binder ◽  
Asphalt Mixture ◽  
Aggregate Size ◽  
Maximum Aggregate Size ◽  
Asphaltic Concrete ◽  
Air Exposure ◽  
Stiffness Modulus ◽  
Aged Asphalt

Hot mix asphalt (HMA) pavement encounter short and long term aging throughout the service life. Laboratory aging is the method used to simulate field aging process of HMA pavement. This study was undertaken to determine the long term effect of different binder and mixture laboratory aging methods on HMA (binder aging and mixture aging). Three types of HMA mixtures were prepared for this study namely Asphaltic Concrete with 10 mm nominal maximum aggregate size (AC 10), Asphaltic Concrete 14 mm (AC 14) and Asphaltic Concrete 28 mm (AC 28). These specimens were conditioned with nine different methods and durations.  Resilient modulus test was carried out at 40˚C as an initial indicator of the specimen performance. Permanent deformation of the same specimens was then evaluated by dynamic creep test. Generally, the aged asphalt binder specimens have higher resilient and stiffness modulus compared to aged asphalt mixture specimens. In addition, aged binder specimens have a lower permanent strain which indicates higher resistance to permanent deformation. This study also found that high resilient and stiffness modulus of specimens is attributed by different in heating frequency, temperature, air exposure and binder content of the mixtures.

Evaluation of Pyrolized Carbon Black from Scrap Tires as Additive in Hot Mix Asphalt

1996 ◽  
Vol 1530 (1) ◽  
pp. 43-50 ◽  
Author(s):  
Taesoon Park ◽  
Brian J. Coree ◽  
C. W. Lovell
Keyword(s):  
Carbon Black ◽  
Asphalt Concrete ◽  
Resilient Modulus ◽  
Testing Machine ◽  
Asphalt Mixture ◽  
Asphalt Mixtures ◽  
Test Results ◽  
Reinforcing Agent ◽  
Dynamic Creep ◽  
Temperature Susceptibility

The viability of using pyrolized carbon black (CBp) derived from waste tires as a reinforcing agent in asphalt mixtures was evaluated. Commercial carbon black (CB) has been previously shown to reduce the rutting resistance, temperature susceptibility, and cracking propagation potential of asphalt concrete. It was believed that CBp could produce similar benefits; this belief has been confirmed by this study. Different ratios of CBp and CB (5, 10, 15, and 20 percent by weight of asphalt) were blended with two grades of asphalt (AC-10 and AC-20). The Marshall method, the gyratory testing machine, the dynamic creep testing (confined), the indirect tensile testing, and the resilient modulus test were performed. The test results of CBp mixtures were compared with results of CB and conventional mixtures. The analyses of test results show that the typical performance of CBp-modified asphalt mixtures is improved with respect to commercial CB and conventional mixtures. The rutting potential and the temperature susceptibility can be reduced by the inclusion of CBp in the asphalt mixture. A CBp content of 10 to 15 percent by weight of asphalt is recommended for improvement of asphalt concrete.

EXPERIMENTAL EVALUATION OF ANTI-STRIPPING ADDITIVES ON POROUS ASPHALT MIXTURES

2016 ◽  
Vol 78 (7-2) ◽  
Author(s):  
Nurul Athma Mohd Shukry ◽  
Norhidayah Abdul Hassan ◽  
Mohd Rosli Hainin ◽  
Mohd Ezree Abdullah ◽  
Nor Asniza Mohamed Abdullah ◽  
...  
Keyword(s):  
Resilient Modulus ◽  
Asphalt Mixture ◽  
Hydrated Lime ◽  
Modified Bitumen ◽  
Air Voids ◽  
Porous Asphalt ◽  
Abrasion Loss ◽  
Asphalt Mix ◽  
Strength And Durability ◽  
Permeability Rate

The open structure of porous asphalt mix influences its strength and durability against air, water and clogging materials. These factors cause loss of adhesion between binder-aggregate interface and loss of cohesion within the binder film.  This could lead to stripping problem which contribute to premature failures as well as deterioration in the performance and service life of porous asphalt. Therefore, this study is aimed to evaluate the potential of diatomite as anti-stripping additives in porous asphalt and compared with hydrated lime and Ordinary Portland Cement (OPC). Field Emission Scanning Electron Microscopy (SEM) test and Energy Dispersive X-ray Spectroscopy analysis (EDX) were conducted to investigate the microstructure and chemical composition of the anti-stripping additives. A number of gyratory compacted samples of porous asphalt mixture with Malaysian gradation were prepared. Each sample was incorporated with 2% of anti-stripping additives as filler then mixed with polymer modified bitumen of PG76. The samples were measured for air voids content, permeability rate, resilient modulus and abrasion loss. The results indicate that samples prepared with hydrated lime show higher permeability rate and lower abrasion loss compared to samples with OPC and diatomite. However, the samples prepared with diatomite show enhanced resilient modulus compared to those with hydrated lime and OPC.

Sign in / Sign up

Export Citation Format

Share Document