Influence of Cement Type and Relining Procedure on Push-Out Bond Strength of Fiber Posts after Cyclic Loading

2015 ◽  
Vol 25 (1) ◽  
pp. 54-60 ◽  
Author(s):  
Ana Paula Farina ◽  
Henrique Chiela ◽  
Bruno Carlini-Junior ◽  
Marcelo Ferraz Mesquita ◽  
Daniela Cristina Miyagaki ◽  
...  
Keyword(s):  
Cyclic Loading ◽  
Bond Strength ◽  
Cement Type ◽  
Fiber Posts ◽  
Push Out

Effect of cyclic loading and resin cement type used for luting fiber posts on bond strength at different root levels of crown-restored human teeth

2016 ◽  
Vol 31 (3) ◽  
pp. 261-271
Author(s):  
Toni Arcuri ◽  
Enrico Coser Bridi ◽  
Roberta Tarkany Basting ◽  
Fabiana Mantovani Gomes França ◽  
Flávia Lucisano Botelho Amaral ◽  
...  
Keyword(s):  
Cyclic Loading ◽  
Bond Strength ◽  
Resin Cement ◽  
Cement Type ◽  
Human Teeth ◽  
Fiber Posts

The Influence of Time and Cement Type on Push-Out Bond Strength of Fiber Posts to Root Dentin

2011 ◽  
Vol 36 (6) ◽  
pp. 643-648 ◽  
Author(s):  
AA Leme ◽  
M Coutinho ◽  
AF Insaurralde ◽  
PMC Scaffa ◽  
LM da Silva
Keyword(s):  
Bond Strength ◽  
Clinical Relevance ◽  
Resin Cement ◽  
Cement Type ◽  
Adhesive Resin ◽  
Fiber Posts ◽  
Etch And Rinse ◽  
Root Dentin ◽  
Adhesive Resin Cement ◽  
Push Out

Clinical Relevance A self-adhesive resin cement can provide a significantly stronger bond than a three-step etch-and-rinse adhesive and resin cement when used to lute fiber posts.

scholarly journals Effect of surface treatments on push-out bond strength of calcium silicate-based cements to fiber posts

2021 ◽  
Vol 21 (1) ◽  
Author(s):  
Amr M. Elnaghy ◽  
Ayman Mandorah ◽  
Ali H. Hassan ◽  
Alaa Elshazli ◽  
Shaymaa Elsaka
Keyword(s):  
Bond Strength ◽  
Surface Treatment ◽  
Glass Fiber ◽  
Calcium Silicate ◽  
Surface Treatments ◽  
The Other ◽  
Fiber Posts ◽  
Glass Fiber Posts ◽  
Push Out ◽  
Effect Of Surface

Abstract Background To evaluate the effect of surface treatments on the push-out bond strength of Biodentine (BD) and white mineral trioxide aggregate (WMTA) to fiber posts. Methods Two brands of fiber posts were used: Reblida post; RP and RelyX post; RX. Each type of post (n = 80/group) was divided into four groups (n = 20/group) and exposed to surface treatment as follows: Control (no treatment), sandblasting (SB), hydrofluoric acid (HF), and TiF4 4 wt/v%. Each group was further subdivided into two subgroups (n = 10/subgroup) based on the type of CSCs used as follows: Subgroup A: BD and Subgroup B: WMTA. Push-out bond strength of BD and WMTA to glass fiber posts was assessed. Data were statistically analyzed using three-way ANOVA and Tukey’s test. A Weibull analysis was performed on the push-out bond strength data. Results BD showed higher bond strength than WMTA (P < 0.001). The push-out bond strength for posts treated with TiF4 4 wt/v% showed greater bond strength than the other surface treatments (P < 0.05). The BD/RP-TiF4 4 wt/v% showed the greater characteristic bond strength (σ0) (15.93) compared with the other groups. Surface treatments modified the surface topography of glass fiber posts. Conclusions The BD/RP-TiF4 4 wt/v% showed greater bond strength compared with the other groups. The TiF4 4 wt/v% surface treatment enhanced the bond strength of BD and WMTA to glass fiber posts than the other treatments. Surface treatment of fiber post with TiF4 4 wt/v% could be used to improve the bond strength with calcium silicate-based cements.

scholarly journals Influence of Different Conditioning Treatments on The Bond Integrity of Root Dentin to rGO Infiltrated Dentin Adhesive. SEM, EDX, FTIR and MicroRaman Study

Polymers ◽  
2021 ◽  
Vol 13 (10) ◽  
pp. 1555
Author(s):  
Firas Alqarawi ◽  
Mazen Alkahtany ◽  
Khalid Almadi ◽  
Afnan Gassem ◽  
Faris Alshahrani ◽  
...  
Keyword(s):  
Raman Spectroscopy ◽  
Bond Strength ◽  
Strength Test ◽  
Control Group ◽  
Micro Raman Spectroscopy ◽  
Fiber Posts ◽  
Root Canal Disinfection ◽  
Reduced Graphene ◽  
Root Dentin ◽  
Push Out

The present study aimed to synthesize and equate the mechanical properties and dentin interaction of two adhesives; experimental adhesive (EA) and 5 wt.% reduced graphene oxide rGO) containing adhesive. Scanning electron microscopy (SEM)-Energy-dispersive X-ray spectroscopy (EDX), Micro-Raman spectroscopy, push-out bond strength test, and Fourier Transform Infrared (FTIR) spectroscopy were employed to study nano-bond strength, degree of conversion (DC), and adhesive-dentin interaction. The EA was prepared, and rGO particles were added to produce two adhesive groups, EA-rGO-0% (control) and rGO-5%. The canals of sixty roots were shaped and prepared, and fiber posts were cemented. The specimens were further alienated into groups based on the root canal disinfection technique, including 2.5% sodium hypochlorite (NaOCl), Photodynamic therapy (PDT), and ER-CR-YSGG laser (ECYL). The rGO nanoparticles were flake-shaped, and EDX confirmed the presence of carbon (C). Micro-Raman spectroscopy revealed distinct peaks for graphene. Push-out bond strength test demonstrated highest values for the EA-rGO-0% group after NaOCl and PDT conditioning whereas, rGO-5% showed higher values after ECYL conditioning. EA-rGO-0% presented greater DC than rGO-5% adhesive. The rGO-5% adhesive demonstrated comparable push-out bond strength and rheological properties to the controls. The rGO-5% demonstrated acceptable DC (although lower than control group), appropriate dentin interaction, and resin tag establishment.

CAD/CAM Milled Glass Fiber Posts: Adaptation and Mechanical Behavior in Flared Root Canals

2021 ◽  
Author(s):  
MER Gama ◽  
GS Balbinot ◽  
GC Ferreira ◽  
EG Mota ◽  
VCB Leitune ◽  
...  
Keyword(s):  
Bond Strength ◽  
Glass Fiber ◽  
Fiber Post ◽  
Root Canals ◽  
Fiber Posts ◽  
Cad Cam ◽  
Glass Fiber Posts ◽  
Glass Fiber Post ◽  
Post And Core ◽  
Push Out

SUMMARY This study aimed to evaluate the cementation and mechanical behavior of flared root canals restored with CAD/CAM milled glass fiber post-and-core systems. Sixty-six endodontically treated human canines with a flared root canal were divided into three different groups according to the type of post: GPF received prefabricated posts; GREL received relined glass fiber posts, and GMILLED received CAD/CAM milled glass fiber posts. Cementation was performed with self-adhesive resin cement. The samples were submitted to x-ray microcomputed tomography analysis for the analysis of voids and gaps. The roots were sectioned and submitted to the push-out bond strength test. The load-to-fracture was evaluated in post-and-core systems. GMILLED presented lower void and lower gap volumes when compared to GPF and GREL. On the load-to-fracture test, GREL presented statistically significant higher values than GMILLED. GPF values had no statistically significant difference from the two other groups. On the push-out bond strength test, GPF presented statistically significant lower values when compared to GREL and GMILLED. The most common failure pattern was between dentin and cement in all groups. CAD/CAM milled glass fiber post-and-core systems presented an enhanced adaptation of glass fiber posts to flared root canal systems. Their results were comparable to relined posts in bond strength, while load-to-fracture-results for GMILLED were lower than those for GPF.

scholarly journals Effect of Chlorhexidine and Ethanol Application on Longterm Push-out Bond Strength of Fiber Posts to Dentin

2015 ◽  
Vol 16 (7) ◽  
pp. 547-553 ◽  
Author(s):  
Roberta Tarkany Basting ◽  
Cecília Pedroso Turssi ◽  
Flavia Lucisano Botelho do Amaral ◽  
Fabiana Mantovani Gomes França ◽  
Rafaela Crystyan Vaneli ◽  
...  
Keyword(s):  
Bond Strength ◽  
Repeated Measures ◽  
Adhesive System ◽  
Resin Cement ◽  
Control Group ◽  
Test Analysis ◽  
Significance Level ◽  
Fiber Posts ◽  
Etch And Rinse ◽  
Push Out

ABSTRACT Aim The aim of this study was to evaluate the effect of chlorhexidine and ethanol application on the push-out bond strength and bond durability of fiber posts cemented with an etch-and-rinse adhesive system/resin cement to intraradicular dentin. Materials and methods Fifty-four bovine roots were shaped for the cementation of a fiberglass post and received the application of 37% phosphoric acid. They were then randomly divided into three groups, according to the type of dentin treatment (n = 18) performed: no treatment (control group), 100% ethanol, or 2% chlorhexidine. Next, the adhesive system (Adper Scotch Bond Multipurpose Plus, 3M ESPE) was applied to the dentin, according to the manufacturer's instructions. Glass fiber posts were cemented with dual resin cement (Rely X ARC, 3M ESPE). After 48 hours, the specimens were serially sectioned for push-out test analysis, providing two slices from each root third (cervical, medium and apical), one of which was tested immediately and the other stored in distilled water for 180 days. The data were analyzed with three-way analysis of variance (ANOVA) for repeated measures and Tukey's test at a 5% significance level. Results Intraradicular treatment with chlorhexidine yielded the highest bond strength means, followed by ethanol treatment. The control group presented the lowest bond strength means. Water storage exerted no effect on bond strength values. Conclusion Both chlorhexidine and ethanol improved push-out bond strength to intraradicular dentin, with the former providing the best results, regardless of the storage time. Clinical significance The application of 2% chlorhexidine or 100% ethanol may be an important step that can be taken to enhance bond strength of fiber posts to intraradicular dentin, when dual resin cements are used. How to cite this article França FMG, Vaneli RC, de Melo Conti C, Basting RT, do Amaral FLB, Turssi CP. Effect of Chlorhexidine and Ethanol Application on Long-term Pushout Bond Strength of Fiber Posts to Dentin. J Contemp Dent Pract 2015;16(7):547-553.

scholarly journals Influence of the Resin Cement Thickness on the Push-Out Bond Strength of Glass Fiber Posts

2016 ◽  
Vol 27 (5) ◽  
pp. 592-598 ◽  
Author(s):  
Regina Maria Helen-Cot Marcos ◽  
◽  
Gustavo Ross Kinder ◽  
Edson Alfredo ◽  
Tarcisio Quaranta ◽  
...  
Keyword(s):  
Bond Strength ◽  
Glass Fiber ◽  
Resin Composite ◽  
Resin Cement ◽  
Distilled Water ◽  
Cement Layer ◽  
Fiber Posts ◽  
Glass Fiber Posts ◽  
Post Space ◽  
Push Out

Abstract The objective of the present study was to evaluate the influence of resin cement thickness on the bond strength of prefabricated and customized glass fiber posts after storage in distilled water. Thirty human uniradicular roots were treated endodontically. The roots were divided into 3 groups: THIN (thin cement layer) - post space preparation with #0.5 drill and cementation of #0.5 post; THICK (thick cement layer) - post space preparation with #1 drill and cementation of #0.5 post; and CUSTOM (customized cement layer) - post space preparation with #1 drill and cementation of a customized post (#0.5 glass fiber posts customized with resin composite). All posts were luted with self-adhesive resin cement. The push-out test was carried out after storage for 24 h and 90 days in distilled water at 37 °C. The data were analyzed with three-way ANOVA and Tukey's test (a=0.05). Bond strengths were significantly higher for CUSTOM (9.37 MPa), than for THIN (7.85 MPa) and THICK (7.07 MPa), which were statistically similar. Considering the thirds, the bond strength varied in the sequence: apical (7.13 MPa) < middle (8.22 MPa) = coronal (8.94 MPa). Bond strength for 24 h storage was significantly higher (8.80 MPa) than for 90-day storage (7.40 MPa). It may be concluded that the thickness of resin cement influenced the bond strength of glass fiber posts. The customized posts presented higher bond strength. Storage in water for 90 days affected negatively the values of bond strength, especially for thick cement layers in the apical third.

Influence of curcumin photosensitizer in photodynamic therapy on the mechanical properties and push-out bond strength of glass-fiber posts to intraradicular dentin

2019 ◽  
Vol 25 ◽  
pp. 376-381 ◽  
Author(s):  
Henrico Badaoui Strazzi Sahyon ◽  
Paloma Pereira da Silva ◽  
Murilo Silva de Oliveira ◽  
Luciano Tavares Angelo Cintra ◽  
Eloi Dezan-Júnior ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Photodynamic Therapy ◽  
Bond Strength ◽  
Glass Fiber ◽  
Fiber Posts ◽  
Glass Fiber Posts ◽  
Push Out

scholarly journals Effect of cement type and thickness on push-out bond strength of fiber posts

2018 ◽  
Vol 12 (4) ◽  
pp. 277-282
Author(s):  
Farzaneh Farid ◽  
Khadijeh Rostami ◽  
Sareh Habibzadeh ◽  
MohammadJavad Kharazifard
Keyword(s):  
Bond Strength ◽  
Testing Machine ◽  
Test Results ◽  
Resin Cements ◽  
Fiber Posts ◽  
Significant Difference ◽  
Root Dentin ◽  
Group 2 ◽  
Self Etch ◽  
Push Out

Background. This study investigated the effect of the thickness of two resin cements on push-out bond strength of fiber posts to root dentin. Methods. Sixty decoronated single-rooted teeth were endodontically treated. The specimens were then randomly allocated to two groups (n=30); group 1: drill size 90 w, matching the size of fiber posts used; group 2: drill size 110, larger than the posts. The specimens in each group were divided into 2 subgroups (n=15); subgroup SE, in which the posts were cemented with self-etch Panavia F2.0 and subgroup SA, in which self-adhesive Panavia cement was used. After 72 hours, 2 slices with 1 mm of thickness were prepared from the mid-root of each specimen. Push-out bond strength test was performed in a universal testing machine at a crosshead speed of 1 mm/min. Data were analyzed with two-way ANOVA and t-test. Results. The mean bond strengths of the posts cemented in matched-size spaces for SE and SA groups were 4.02±1.6 and 4.12±2.3 MPa, respectively. For posts cemented in oversized spaces, the values were 4.9±2.3 and 2.8±1.3 MPa, respectively. In matched-size spaces, there was no significant difference between the two groups. Conclusion. The results of this study suggested that increasing the cement thickness would reduce the bond strength of fiber posts to root dentin when self-adhesive cements are used; however, self-etch adhesives were not affected.

Sign in / Sign up

Export Citation Format

Share Document