scholarly journals Response to RE: Atomic force microscopy and scanning electron microscopy analysis of daily disposable limbal ring contact lenses

2016 ◽  
Vol 99 (3) ◽  
pp. 288-288
Author(s):  
Kathrine Lorenz Osborn ◽  
Charis Lau ◽  
Michelle Mundorf
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Atomic Force Microscopy ◽  
Contact Lenses ◽  
Scanning Electron Microscopy Analysis ◽  
Force Microscopy ◽  
Atomic Force ◽  
Electron Microscopy Analysis ◽  
Microscopy Analysis ◽  
Scanning Electron

scholarly journals Corrosion Behavior and Mechanical Properties of a Nanocomposite Superhydrophobic Coating

Coatings ◽  
2021 ◽  
Vol 11 (6) ◽  
pp. 652
Author(s):  
Divine Sebastian ◽  
Chun-Wei Yao ◽  
Lutfun Nipa ◽  
Ian Lian ◽  
Gary Twu
Keyword(s):  
Electron Microscopy ◽  
Mechanical Properties ◽  
Scanning Electron Microscopy ◽  
Atomic Force Microscopy ◽  
Nanocomposite Coating ◽  
Superhydrophobic Coating ◽  
Force Microscopy ◽  
Atomic Force ◽  
Microscopy Images ◽  
Scanning Electron

In this work, a mechanically durable anticorrosion superhydrophobic coating is developed using a nanocomposite coating solution composed of silica nanoparticles and epoxy resin. The nanocomposite coating developed was tested for its superhydrophobic behavior using goniometry; surface morphology using scanning electron microscopy and atomic force microscopy; elemental composition using energy dispersive X-ray spectroscopy; corrosion resistance using atomic force microscopy; and potentiodynamic polarization measurements. The nanocomposite coating possesses hierarchical micro/nanostructures, according to the scanning electron microscopy images, and the presence of such structures was further confirmed by the atomic force microscopy images. The developed nanocomposite coating was found to be highly superhydrophobic as well as corrosion resistant, according to the results from static contact angle measurement and potentiodynamic polarization measurement, respectively. The abrasion resistance and mechanical durability of the nanocomposite coating were studied by abrasion tests, and the mechanical properties such as reduced modulus and Berkovich hardness were evaluated with the aid of nanoindentation tests.

Comparative Study of Field Emission-Scanning Electron Microscopy and Atomic Force Microscopy to Assess Self-assembled Monolayer Coverage on Any Type of Substrate

1999 ◽  
Vol 5 (6) ◽  
pp. 413-419 ◽  
Author(s):  
Bernardo R.A. Neves ◽  
Michael E. Salmon ◽  
Phillip E. Russell ◽  
E. Barry Troughton
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Atomic Force Microscopy ◽  
Comparative Study ◽  
Field Emission ◽  
Self Assembled Monolayer ◽  
Force Microscopy ◽  
Atomic Force ◽  
Self Assembled ◽  
Scanning Electron

Abstract: In this work, we show how field emission–scanning electron microscopy (FE-SEM) can be a useful tool for the study of self-assembled monolayer systems. We have carried out a comparative study using FE-SEM and atomic force microscopy (AFM) to assess the morphology and coverage of self-assembled monolayers (SAM) on different substrates. The results show that FE-SEM images present the same qualitative information obtained by AFM images when the SAM is deposited on a smooth substrate (e.g., mica). Further experiments with rough substrates (e.g., Al grains on glass) show that FE-SEM is capable of unambiguously identifying SAMs on any type of substrate, whereas AFM has significant difficulties in identifying SAMs on rough surfaces.

Apicoectomy and Scanning Electron Microscopy Analysis of an Implant Infected by Apical (Retrograde) Peri-implantitis: A Case Letter

2018 ◽  
Vol 44 (4) ◽  
pp. 287-291
Author(s):  
Rafael Manfro ◽  
Gislaine Felipe Garcia ◽  
Marcelo Carlos Bortoluzzi ◽  
Vinicius Fabris ◽  
Atais Bacchi ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Scanning Electron Microscopy Analysis ◽  
Electron Microscopy Analysis ◽  
Microscopy Analysis ◽  
Scanning Electron

scholarly journals Characterization of dentin morphology after application of ozone and sodium ascorbate by scanning electron microscopy and atomic force microscopy

RSBO ◽  
2021 ◽  
Vol 17 (2) ◽  
pp. 85-91
Author(s):  
João Batista de Souza ◽  
Daniel Rodrigues ◽  
Paula Cicília Faquim Rodrigues ◽  
Lawrence Gonzaga Lopes ◽  
Tainah Costa Firmiano ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Atomic Force Microscopy ◽  
Phosphoric Acid ◽  
Sodium Ascorbate ◽  
Acid Etching ◽  
Force Microscopy ◽  
Atomic Force ◽  
Group 3 ◽  
Scanning Electron

The aim of this study was to evaluate dentin morphology after ozone gas and sodium ascorbate application by the Scanning Electron Microscopy (SEM) and Atomic Force Microscopy (AFM) images. Material and methods: Seven freshly extracted human third molars were sectioned perpendicularly to the tooth long axis, 3mm above the cementoenamel junction and other section above the first. Dentin slices were obtained, 2 mm thickness, then the slices were sectioned vertically and horizontally into four equal parts, resulting in 28 samples. These were divided in 4 groups (n=7): (G1) phosphoric acid – control; (G2) ozone + phosphoric acid; (G3) phosphoric acid + ozone; and (G4) ozone + sodium ascorbate + phosphoric acid. Dentin morphology of six samples of each groupwas evaluated by SEM and one by AFM. Results: In Groups 2 and 4 there was a change in the effectiveness of acid etching in terms of removing the smear layer. In Group 3 there was a change in the dentin microstructure, which can be a harmful factor regarding the bond strength of adhesive agents. Conclusion: After the qualitative analysis, the application sequences of ozone, phosphoric acid etching and sodium ascorbate application generated differences in the dentinmorphology by SEM and AFM. Sodium ascorbate decreased the ozone effect before the acid etching but did not eliminate it.

Sign in / Sign up

Export Citation Format

Share Document