scholarly journals Ex vivo excimer laser ablation of cornea guttata and ROCK inhibitor‐aided endothelial recolonization of ablated central cornea

2020 ◽  
Vol 98 (6) ◽  
Author(s):  
Stefan Kassumeh ◽  
Annabel Studnitz ◽  
Siegfried G. Priglinger ◽  
Rudolf Fuchshofer ◽  
Nikolaus Luft ◽  
...  
2021 ◽  
Vol 8 ◽  
Author(s):  
Kai Yang ◽  
Jinyun Tan ◽  
Ying Deng ◽  
Weihao Shi ◽  
Bo Yu

Purpose: We aimed to evaluate the safety and effectiveness of applying an excimer laser in debulking human carotid atherosclerotic plaques by investigating the distal debris, plaque luminal gain, and micromorphology of the plaque surface.Methods: Eighteen plaque samples obtained from carotid endarterectomy (CEA) were randomly allocated to the excimer laser ablation (45 mJ/mm2, 25 Hz) alone group (group 1), balloon angioplasty (8 atm) alone group (group 2), and excimer laser ablation combined with balloon angioplasty group (group 3). Hematoxylin–eosin staining and Movat's pentachrome staining were performed on the collected particles to quantify the size and composition of the debris. The superficial micromorphological structure of the plaque lumen surface after device treatments was observed using a scanning electron microscope. Micro-CT, tissue sections, and pathological stainings were applied to the treated plaques. The plaque lumen and artery lumen were three-dimensionally reconstructed using clinical computed tomography angiography and the micro-CT images. Lumen enlargement was set as the main measurement of effectiveness.Results: Group 3 produced the highest luminal gain (5.40 ± 4.51 mm2), while the other two groups had gains of 4.05 ± 3.20 and 3.77 ± 2.55 mm2. Both devices caused disruptions to the plaque lumen surface. Laser ablation exposed the fibers under the endothelium and balloon angioplasty cracked the surface. The mean amounts were 3,611 ± 1,475.4 for group 1, 2,828 ± 1,266.7 for group 2, and 4,400 ± 2,567.9 for group 3. More than 90% of the distal debris was smaller than 10 μm. Group 2 produced the most debris with Feret (maximum caliper diameter) ≥ 40 μm; group 1 had the least. There was little difference in the contents of collagen and reticular fiber in the debris in each group, but a big difference was observed in the contents of fibrin and mucin.Conclusion: Excimer laser ablation could significantly increase the luminal gain of carotid plaque with high stenosis. Excimer laser combined with balloon angioplasty achieved the highest lumen enlargement. Our result also suggests that the embolic protection strategy needs to be renewed for the application of a plaque debulking device in the future.


1992 ◽  
Vol 12 (4) ◽  
pp. 390-396 ◽  
Author(s):  
Joshua Lustmann ◽  
Mario Ulmansky ◽  
Amihay Fuxbrunner ◽  
Aaron Lewis

1997 ◽  
Vol 65 (3) ◽  
pp. 259-261 ◽  
Author(s):  
J. Heitz ◽  
J.D. Pedarnig ◽  
D. Bäuerle ◽  
G. Petzow

1990 ◽  
Vol 191 ◽  
Author(s):  
Michael E. Geusic ◽  
Alan F. Stewart ◽  
Larry R. Pederson ◽  
William J. Weber ◽  
Kenneth R. Marken ◽  
...  

ABSTRACTExcimer laser ablation with an in situ heat treatment was used to prepare high quality superconducting YBa2Cu3O7−x thin films on (100)-SrTiO3 and (100)-LaAlO3 substrates. A pulsed excimer laser (XeCl; 308 nm) was used to ablate a rotating, bulk YBa2Cu3O7−x target at a laser energy density of 2–3 J/cm2. Based on four-probe dc resistance measurements, the films exhibited superconducting transition temperatures (Tc, midpoint) of 88 and 87K with 2K (90–10%) transition widths for SrTiO3 and LaAlO3, respectively. Transport critical current densities (Jc) measured at 77K were 2 × 106 and 1 × 106 A/cm2 in zero field for SrTiO3 and LaAlO3, respectively. X-ray diffraction (XRD) analysis showed the films to be highly oriented, with the c-axis perpendicular to the substrate surface.


1992 ◽  
Vol 15 (4) ◽  
pp. 260-263 ◽  
Author(s):  
Sangeeta Kale ◽  
S.B. Ogale ◽  
J.P. Jog ◽  
V.M. Nadkarni

Sign in / Sign up

Export Citation Format

Share Document