Implementation and Validation of Sandia Outdoor Photovoltaic Test Method and Performance Model at Arizona State University

Author(s):  
Bo Li ◽  
David King ◽  
William Boyson ◽  
Govindasamy TamizhMani
Author(s):  
Thurmon Lockhart ◽  
Rahul Soangra ◽  
Ijphmeditor

This special issue was conceived during the 11th Annual Conference of Prognostic and Health Management Society’s Panel session on the September 25th at Scottsdale, AZ, USA. We would like to thank the panel members and their colleagues in their participation in this special issue focusing on engineered technologies for older adults. This work was partially funded by the NSF ERC seed grant from an interdisciplinary group of researchers from Iowa State University, Arizona State University, Georgia Tech, Florida State University, Chapman University and the University of California Irvine who are engaged in developing a large-scale grant proposal that will be focused on integrated technologies to promote resilient aging and reducing healthcare costs.The manuscripts exemplify our research focus and illustrates contributions in the fields of wearable smart sensors, sensor-data-fusion, machine learning and data mining, prediction and diagnosis, and electronic health records and databases - all in the context of prognostics and health management for human health and performance.We would like to thank the PHM Society for providing an opportunity to publish in their premier journal, and importantly, we are grateful for help of the Editor-in-Chief – Marcos Orchard, Ph.D. for his countless hours to edit and make it best possible of this special issue. Finally, we would like to express sincere appreciation to all the reviewers who have contributed their time and thoughtful feedback to making this special issue publication a success.


Author(s):  
Jacob Kashiwagi ◽  
Alfredo Rivera

The business environment is rapidly changing. Automation and information systems are eliminating stakeholders out of the supply chain at a dizzying speed. Facility managers (FM) must change to prevent extinction. The path to extinction is clear; outsourcing, followed by loss of benefits, followed by commoditization and abusive work hours and demands. Often a major method of survival is cutting costs which results in poor performance. FM accountability and performance decrease under these conditions. FMs must identify and utilize cutting-edge information system practices that simplify and minimize FMs’ workload and cost, while increasing value and impact. Technology developed at Arizona State University (ASU) over the last 25 years, and now in testing by government and private organizations, allows FMs to become information workers, expand their influence and responsibilities, and cut their costs by 90%. This new FM approach increases capability to lead and deliver all building systems with minimal experience.


Author(s):  
Alfredo Rivera ◽  
Dean Kashiwagi

Traditional project management (PM) results have been poor. The practices of direction and control have been identified by deductive logic as problematic. Deductive logic identifies that, if a manager directs and controls, their risk goes up and performance will go down. A new approach to PM is the replacement of technical expertise with the identification and utilization of expertise. New components of this approach are the minimization of the need to think and make decisions, the use of the language of metrics, a new definition of risk, and the use of preplanning that includes the utilization of expertise and focusing on the mitigation of risk that the expert does not control. This approach has been tested by the International Council for Research and Innovation in Building and Construction Working Commission (CIB W117, formerly known as the Performance Based Studies Research Group at Arizona State University) for the past 25 years increasing customer satisfaction to 98% and minimizing cost by 5 to 30%. These practices are a part of the “PM of the Future.”


Author(s):  
G. G. Hembree ◽  
Luo Chuan Hong ◽  
P.A. Bennett ◽  
J.A. Venables

A new field emission scanning transmission electron microscope has been constructed for the NSF HREM facility at Arizona State University. The microscope is to be used for studies of surfaces, and incorporates several surface-related features, including provision for analysis of secondary and Auger electrons; these electrons are collected through the objective lens from either side of the sample, using the parallelizing action of the magnetic field. This collimates all the low energy electrons, which spiral in the high magnetic field. Given an initial field Bi∼1T, and a final (parallelizing) field Bf∼0.01T, all electrons emerge into a cone of semi-angle θf≤6°. The main practical problem in the way of using this well collimated beam of low energy (0-2keV) electrons is that it is travelling along the path of the (100keV) probing electron beam. To collect and analyze them, they must be deflected off the beam path with minimal effect on the probe position.


2018 ◽  
Vol 30 (1-2) ◽  
pp. 32-48
Author(s):  
M. Louail ◽  
S. Prat

The standard ASUDAS scoring system (Arizona State University Dental Anthropology System) is used to assess dental morphological variations in modern humans. It is also frequently used to study, score, and compare morphological variations in fossil hominin taxa and to examine their phylogenetic relationships. However, using ASUDAS in studies of this type is under debate because it is based on modern Homo sapiens populations and does not appear to cover all variations observed in fossil Plio-Pleistocene homi- nins. Our observations and coding of 178 dentals casts of Plio-Pleistocene specimens based on ASUDAS and from the literature have confirmed the need to adapt the standard system to fossil hominins. In this initial study, we propose that the scoring procedures for some morphological characters need to be readjusted, while others could be standardized following the ASUDAS system.


Sign in / Sign up

Export Citation Format

Share Document