Design and analysis of a connected broadband multi-piezoelectric-bimorph- beam energy harvester

2014 ◽  
Vol 61 (6) ◽  
pp. 1016-1023 ◽  
Author(s):  
Haifeng Zhang ◽  
Karim Afzalul
Keyword(s):  
Beam Energy ◽  
Energy Harvester ◽  
Piezoelectric Bimorph ◽  
Bimorph Beam

scholarly journals Modeling, Simulation and Optimization of Piezoelectric Bimorph Transducer for Broadband Vibration Energy Harvesting

2017 ◽  
Vol 6 (4) ◽  
pp. 5 ◽  
Author(s):  
Nan Chen ◽  
Vishwas Bedekar
Keyword(s):  
Energy Harvester ◽  
Piezoelectric Properties ◽  
Vibration Energy ◽  
Piezoelectric Bimorph ◽  
Vibration Energy Harvesting ◽  
Compliance Matrix ◽  
Simulation And Optimization ◽  
Power Characteristics ◽  
Modeling Simulation ◽  
Length Width

We demonstrate the detailed analysis for conversion of piezoelectric properties into compliance matrix and simulate a series bimorph configuration for vibration based energy generation. Commercially available software COMSOL Multiphysics was used to apply boundary conditions for optimization of geometric parameters such as length, width and thickness of piezoelectric layer to study voltage and power characteristics of the harvester. The resulting energy harvester was found to generate 1.73 mW at 53.4 Hz across a 3MW load with an energy density of 13.08mJ/cm3. We also investigated feasibility of this model by comparing it with existing experimental data of known piezoelectric ceramic compositions and found good correlation between the two.

scholarly journals Modeling and Experiment of a V-Shaped Piezoelectric Energy Harvester

2018 ◽  
Vol 2018 ◽  
pp. 1-15 ◽  
Author(s):  
Yue Zhao ◽  
Yi Qin ◽  
Lei Guo ◽  
Baoping Tang
Keyword(s):  
Energy Harvesting ◽  
Frequency Band ◽  
Electromechanical Coupling ◽  
Energy Harvester ◽  
Structural Parameters ◽  
Ambient Vibration ◽  
Piezoelectric Bimorph ◽  
Actual Structure ◽  
Piezoelectric Energy ◽  
Operation Frequency

Vibration-based energy harvesting technology is the most promising method to solve the problems of self-powered wireless sensor nodes, but most of the vibration-based energy harvesters have a rather narrow operation bandwidth and the operation frequency band is not convenient to adjust when the ambient frequency changes. Since the ambient vibration may be broadband and changeable, a novel V-shaped vibration energy harvester based on the conventional piezoelectric bimorph cantilevered structure is proposed, which successfully improves the energy harvesting efficiency and provides a way to adjust the operation frequency band of the energy harvester conveniently. The electromechanical coupling equations are established by using Euler-Bernoulli equation and piezoelectric equation, and then the coupled circuit equation is derived based on the series connected piezoelectric cantilevers and Kirchhoff's laws. With the above equations, the output performances of V-shaped structure under different structural parameters and load resistances are simulated and discussed. Finally, by changing the angle θ between two piezoelectric bimorph beams and the load resistance, various comprehensive experiments are carried out to test the performance of this V-shaped energy harvester under the same excitation. The experimental results show that the V-shaped energy harvester can not only improve the frequency response characteristic and the output performance of the electrical energy, but also conveniently tune the operation bandwidth; thus it has great application potential in actual structure health monitoring under variable working condition.

Broad-Band Vibro-Impacting Energy Harvester

2010 ◽  
Vol 654-656 ◽  
pp. 2799-2802 ◽  
Author(s):  
Scott D. Moss ◽  
Ian Powlesland ◽  
Michael Konak ◽  
Alex Barry ◽  
Steve C. Galea ◽  
...  
Keyword(s):  
Energy Harvesting ◽  
Energy Harvester ◽  
Vibration Spectrum ◽  
Broad Band ◽  
Critical Issue ◽  
Piezoelectric Bimorph ◽  
Aircraft Structure ◽  
Frequency Agile ◽  
Periodic Replacement ◽  
Random Band

The certification of retro-fitted structural health monitoring (SHM) systems for use on aircraft raises a number of challenges. One critical issue is determining the optimal means of supplying power to these systems, given that access to the existing aircraft power-system is likely to be problematic. Other conventional options such as primary cells can be difficult to certify and would need periodic replacement, which in an aircraft context would pose a serious maintenance issue. Previously, the DSTO has shown that a structural-strain based energy harvesting approach can be used to power a device for SHM of aircraft structures. Acceleration-based energy harvesting from airframes is more demanding (than a strain based approach) since the vibration spectrum of an aircraft structure varies dynamically with flight conditions, and hence a frequency agile or (relatively) broad-band device is often required to maximize the energy harvested. This paper reports on the development of a prototype vibro-impacting energy harvester with a ~59 gram flying mass and two piezoelectric bimorph-stops. Over the frequency range 29-41 Hz using a continuous-sine 450 milli-g r.m.s. excitation, the harvester delivers an average of 5.1 mW. From a random band-passed 25-45 Hz excitation with r.m.s. 450 milli-g, the average harvester output is 1.7 mW.

Sensors and energy harvesters based on (1–x)PMN-xPT piezoelectric ceramics

2019 ◽  
Vol 88 (1) ◽  
pp. 10901 ◽  
Author(s):  
Houda Lifi ◽  
Chouaib Ennawaoui ◽  
Abdelowahed Hajjaji ◽  
Samira Touhtouh ◽  
Said Laasri ◽  
...  
Keyword(s):  
Energy Harvester ◽  
Proof Mass ◽  
Piezoelectric Ceramics ◽  
Piezoelectric Bimorph ◽  
Mechanical Vibrations ◽  
Energy Harvesters ◽  
Hot Air ◽  
Simulation Results ◽  
Piezoelectric Performance ◽  
Good Agreement

With recent advancements in energy conversion mechanisms, piezoelectric ceramics (1–x)PbMg1/3 Nb2/3Ο3-xPbTiΟ3 (1–x)PMN-xPT have demonstrated their abilities for converting mechanical vibrations into electricity. Three (1–x)PMN-xPT compositions were used in the present work with (x = 0.25, 0.31 and 0.33). The purpose of this paper is to investigate their piezoelectric performance as generators for energy harvesting applications. The energy harvester is numerically analyzed in this work. It consists of a piezoelectric bimorph clamped at one end to vibrating machinery, and a proof mass mounted on its other end. The energy harvester is also analyzed and experimental measurements of the harvested power are compared to the simulation results. A good agreement was observed between the experimental and the simulations results. According the application to exploit the vibrations of a hot air extractor, the results show that the harvested energy density of solid ceramics (1–x)PMN-xPT is 0.043 W/m2.

Sign in / Sign up

Export Citation Format

Share Document