Reinforcement Ant Optimized Fuzzy Controller for Mobile-Robot Wall-Following Control

2009 ◽  
Vol 56 (10) ◽  
pp. 3931-3940 ◽  
Author(s):  
Chia-Feng Juang ◽  
Chia-Hung Hsu
2018 ◽  
Vol 10 (1) ◽  
pp. 168781401775248 ◽  
Author(s):  
Tzu-Chao Lin ◽  
Chao-Chun Chen ◽  
Cheng-Jian Lin

This study developed and effectively implemented an efficient navigation control of a mobile robot in unknown environments. The proposed navigation control method consists of mode manager, wall-following mode, and towards-goal mode. The interval type-2 neural fuzzy controller optimized by the dynamic group differential evolution is exploited for reinforcement learning to develop an adaptive wall-following controller. The wall-following performance of the robot is evaluated by a proposed fitness function. The mode manager switches to the proper mode according to the relation between the mobile robot and the environment, and an escape mechanism is added to prevent the robot falling into the dead cycle. The experimental results of wall-following show that dynamic group differential evolution is superior to other methods. In addition, the navigation control results further show that the moving track of proposed model is better than other methods and it successfully completes the navigation control in unknown environments.


2016 ◽  
Vol 9 (1) ◽  
pp. 9 ◽  
Author(s):  
Andi Adriansyah ◽  
Shamsudin H. Mohd. Amin

Behavior-based control architecture has been broadly recognized due to their compentence in mobile robot development. Fuzzy logic system characteristics are appropriate to address the behavior design problems. Nevertheless, there are problems encountered when setting fuzzy variables manually. Consequently, most of the efforts in the field, produce certain works for the study of fuzzy systems with added learning abilities. This paper presents the improvement of fuzzy behavior-based control architecture using Particle Swarm Optimization (PSO). A wall-following behaviors used on Particle Swarm Fuzzy Controller (PSFC) are developed using the modified PSO with two stages of the PSFC process. Several simulations have been accomplished to analyze the algorithm. The promising performance have proved that the proposed control architecture for mobile robot has better capability to accomplish useful task in real office-like environment.


Author(s):  
Rajmeet Singh ◽  
Tarun Kumar Bera

AbstractThis work describes design and implementation of a navigation and obstacle avoidance controller using fuzzy logic for four-wheel mobile robot. The main contribution of this paper can be summarized in the fact that single fuzzy logic controller can be used for navigation as well as obstacle avoidance (static, dynamic and both) for dynamic model of four-wheel mobile robot. The bond graph is used to develop the dynamic model of mobile robot and then it is converted into SIMULINK block by using ‘S-function’ directly from SYMBOLS Shakti bond graph software library. The four-wheel mobile robot used in this work is equipped with DC motors, three ultrasonic sensors to measure the distance from the obstacles and optical encoders to provide the current position and speed. The three input membership functions (distance from target, angle and distance from obstacles) and two output membership functions (left wheel voltage and right wheel voltage) are considered in fuzzy logic controller. One hundred and sixty-two sets of rules are considered for motion control of the mobile robot. The different case studies are considered and are simulated using MATLAB-SIMULINK software platform to evaluate the performance of the controller. Simulation results show the performances of the navigation and obstacle avoidance fuzzy controller in terms of minimum travelled path for various cases.


2020 ◽  
Vol 9 (4) ◽  
pp. 1711-1717
Author(s):  
Ayman Abu Baker ◽  
Yazeed Yasin Ghadi

This paper presents an ongoing effort to control a mobile robot in unstructured environment. Obstacle avoidance is an important task in the field of robotics, since the goal of autonomous robot is to reach the destination without collision. Several algorithms have been proposed for obstacle avoidance, having drawbacks and benefits. In this paper, the fuzzy controller is used to tackle the problem of mobile robot autonomous navigation in unstructured environment. The objective is to make the robot move along a collision free trajectory until it reaches its target. The proposed approach uses the fuzzified, adaptive inference engine and defuzzification engine. Also number of linguistic labels is optimized for the input of the mobile robot in order to reduce computational time for real-time applications. The proposed fuzzy controller is evaluated subjectively and objectively with other approaches and also the processing time is taken in consideration.


Sign in / Sign up

Export Citation Format

Share Document