Novel second generation current conveyor and voltage mode universal filter application

Author(s):  
Thouraya Ettaghzouti ◽  
Nejib Hassen ◽  
Kamel Besbes

This article given a second generation current controlled current conveyor positive (CCCII+), second generation current controlled current conveyor negative (CCCII-), Quadrature oscillator with high-Q frequency choosing network and implementing completely different phase oscillators by employing (CCCII+) positive and (CCCII-) negative, and high band pass filter network, the approach is predicted on the CMOS technology . The root of this concept is, considering a customary voltage mode oscillator which consists of band pass filter with prime quality issue (high-Q) and voltage mode amplifier is transfigure into current mode oscillator by replacing tans-conductance amplifier. Because the loop of the oscillator is has lavish selectivity, the oscillator process less distortion. In addition 3dB bandwidth, oscillating condition, oscillation frequency of the oscillator could linearly, independently and electronically be tuned by adjusting the bias current of the (CCCII±)[1], lastly different simulations have been carried out to verify the linearity between output and input ports, range of frequency operations. These results can justify that the designed circuits are workable.


2011 ◽  
Vol 02 (03) ◽  
pp. 210-216 ◽  
Author(s):  
Sudhanshu Maheshwari ◽  
Ankita Gangwar

2014 ◽  
Vol 23 (06) ◽  
pp. 1450077 ◽  
Author(s):  
JITENDRA MOHAN ◽  
SUDHANSHU MAHESHWARI

To extend the existing knowledge on first-order voltage-mode all-pass filters, this paper presents two novel first-order voltage-mode all-pass sections, each employing single fully differential second-generation current conveyor (FDCCII) being used as the newly obtained fully differential voltage conveyor (FDVC), a resistor and a grounded capacitor. Both the proposed circuits possess high-input and low-output impedance feature, which makes the proposed circuits ideal for voltage-mode systems. Non-ideal study along with simulation results is given for validation.


Author(s):  
Jiun-Wei Horng ◽  
Chun-Yang Tsai ◽  
Te-Chi Chen ◽  
Chang-Ming Wu

Background: Three high input impedances voltage-mode first-order filters are presented. Methods: The first proposed circuit uses one multi-output second-generation current conveyor, two resistors and one grounded capacitor. The second proposed circuit uses two second-generation current conveyors, three resistors and one grounded capacitor. The third proposed circuit uses one multi-output second-generation current conveyor, one resistor and two grounded capacitors. Results: First-order lowpass and allpass filters can be simultaneously obtained in the first proposed circuit. First-order lowpass, highpass and allpass filters can be simultaneously obtained in the second proposed circuit. The third proposed circuit can realize first-order allpass filter. Conclusion: All the proposed circuits have the advantages of high input impedances and using only grounded capacitors.


Sign in / Sign up

Export Citation Format

Share Document