A high efficiency isolated DC-DC converter with high-output voltage for TWTA telecommunication satellite applications

Author(s):  
R. Gules ◽  
N. Barbi
1998 ◽  
Vol 34 (1) ◽  
pp. 122 ◽  
Author(s):  
Y. Muramoto ◽  
K. Kato ◽  
M. Mitsuhara ◽  
O. Nakajima ◽  
Y. Matsuoka ◽  
...  

Author(s):  
Sourabh Sinha ◽  
S. M. Ali

A high efficiency DC-DC converter for low PV voltage sources has been proposed in this paper. The proposed converter converts the low dc voltage to a high dc voltage with a high-efficiency. The proposed converter uses the active clamping circuit and voltage doubler rectifier in order to achieve a high step-up ratio and soft switching operation. The output diodes are turned off at zero-current, which can significantly reduce the switching power losses at high output voltage applications. A high-efficiency of 97.5 % is achieved to generate 350V high output voltage from 36 V low PV module voltages which can be connected to grid tie for ac application.


Author(s):  
Varij Panwar ◽  
Lokesh Singh Panwar ◽  
Gopinathan Anoop ◽  
Sukho Park

2013 ◽  
Vol 28 (4) ◽  
pp. 1622-1631 ◽  
Author(s):  
Yi Zhao ◽  
Xin Xiang ◽  
Wuhua Li ◽  
Xiangning He ◽  
Changliang Xia

Author(s):  
G.Vijaykumar and Dr.V.Geetha

A high voltage gain modified SEPIC converter is proposed in this paper. This proposed converter has many advantages i.e., high output voltage, lower voltage stress, high efficiency, voltage gain is high without any coupled inductor and transformer, continuous input current. Thus, there is no overshoot voltage at turn-off process for switches. By using single switches, the CCM mode operation can be easily controlled by this converter, so control system is simple and also wide output values is obtained only by modifying the duty cycle. This modified converter has lower components than conventional converter. The operating modes and design of modified converter are discussed. The output power of this converter is 6 watts. By this converter, this converter capable of developing the two and half times of input voltage. The PV system also used this converter to develop high voltage gain. This high voltage gain is achieved by using MATLAB/SIMULIMK platform.


Sign in / Sign up

Export Citation Format

Share Document