An educational virtual laboratory for sliding mode and PID control of inverted pendulum

2008 ◽  
Author(s):  
Metin Demirtas ◽  
Yusuf Altun ◽  
Ayhan Istanbullu
Keyword(s):  
Pid Control ◽  
Inverted Pendulum ◽  
Sliding Mode ◽  
Virtual Laboratory

Robust stabilization control of a spatial inverted pendulum using integral sliding mode controller

2020 ◽  
Vol 0 (0) ◽  
Author(s):  
Ishan Chawla ◽  
Vikram Chopra ◽  
Ashish Singla
Keyword(s):  
Inverted Pendulum ◽  
Sliding Mode ◽  
Robust Stabilization ◽  
Linear Quadratic Regulator ◽  
Humanoid Robots ◽  
Sliding Mode Controller ◽  
Linear Quadratic ◽  
Integral Sliding Mode ◽  
Wide Range ◽  
Lqr Controller

AbstractFrom the last few decades, inverted pendulums have become a benchmark problem in dynamics and control theory. Due to their inherit nature of nonlinearity, instability and underactuation, these are widely used to verify and implement emerging control techniques. Moreover, the dynamics of inverted pendulum systems resemble many real-world systems such as segways, humanoid robots etc. In the literature, a wide range of controllers had been tested on this problem, out of which, the most robust being the sliding mode controller while the most optimal being the linear quadratic regulator (LQR) controller. The former has a problem of non-robust reachability phase while the later lacks the property of robustness. To address these issues in both the controllers, this paper presents the novel implementation of integral sliding mode controller (ISMC) for stabilization of a spatial inverted pendulum (SIP), also known as an x-y-z inverted pendulum. The structure has three control inputs and five controlled outputs. Mathematical modeling of the system is done using Euler Lagrange approach. ISMC has an advantage of eliminating non-robust reachability phase along with enhancing the robustness of the nominal controller (LQR Controller). To validate the robustness of ISMC to matched uncertainties, an input disturbance is added to the nonlinear model of the system. Simulation results on two different case studies demonstrate that the proposed controller is more robust as compared to conventional LQR controller. Furthermore, the problem of chattering in the controller is dealt by smoothening the controller inputs to the system with insignificant loss in robustness.

Sliding Mode Control for Wheeled Inverted Pendulum

2014 ◽  
Vol 971-973 ◽  
pp. 714-717 ◽  
Author(s):  
Xiang Shi ◽  
Zhe Xu ◽  
Qing Yi He ◽  
Ka Tian
Keyword(s):  
Control System ◽  
Sliding Mode Control ◽  
High Performance ◽  
Inverted Pendulum ◽  
Sliding Mode ◽  
Experimental Results ◽  
Control Law ◽  
Collaborative Simulation ◽  
Mode Control ◽  
Wheeled Inverted Pendulum

To control wheeled inverted pendulum is a good way to test all kinds of theories of control. The control law is designed, and it based on the collaborative simulation of MATLAB and ADAMS is used to control wheeled inverted pendulum. Then, with own design of hardware and software of control system, sliding mode control is used to wheeled inverted pendulum, and the experimental results of it indicate short adjusting time, the small overshoot and high performance.

A case study of robust sliding mode control applied to inverted pendulum on a cart

2021 ◽  
Author(s):  
Mateusz Czyzniewski ◽  
Rafal Langowski ◽  
Dawid Klassa ◽  
Mateusz Matwiszyn
Keyword(s):  
Sliding Mode Control ◽  
Inverted Pendulum ◽  
Sliding Mode ◽  
Mode Control
Sign in / Sign up

Export Citation Format

Share Document