scholarly journals Data Access Partitioning for Fine-grain Parallelism on Multicore Architectures

2007 ◽  
Author(s):  
Michael Chu ◽  
Rajiv Ravindran ◽  
Scott Mahlke
Keyword(s):  
Data Access ◽  
Multicore Architectures ◽  
Fine Grain

scholarly journals Exploiting Fine-Grain Thread Parallelism on Multicore Architectures

2009 ◽  
Vol 17 (4) ◽  
pp. 309-323 ◽  
Author(s):  
P.E. Hadjidoukas ◽  
G.Ch. Philos ◽  
V.V. Dimakopoulos
Keyword(s):  
Real Time ◽  
Face Detection ◽  
Runtime System ◽  
Multicore Architectures ◽  
Multicore Systems ◽  
Multicore Platforms ◽  
Programming Paradigm ◽  
Fine Grain ◽  
High Level

In this work we present a runtime threading system which provides an efficient substrate for fine-grain parallelism, suitable for deployment in multicore platforms. Its architecture encompasses a number of optimizations that make it particularly effective in managing a large number of threads and with low overheads. The runtime system has been integrated into an OpenMP implementation to allow for transparent usage under a high level programming paradigm. We evaluate our implementation on two multicore systems using synthetic microbenchmarks and a real-time face detection application.

A formal model of data access for multicore architectures with multilevel caches

2019 ◽  
Vol 179 ◽  
pp. 24-53 ◽  
Author(s):  
Shiji Bijo ◽  
Einar Broch Johnsen ◽  
Ka I Pun ◽  
S. Lizeth Tapia Tarifa
Keyword(s):  
Formal Model ◽  
Data Access ◽  
Multicore Architectures

scholarly journals Scheduling Two-Sided Transformations Using Tile Algorithms on Multicore Architectures

2010 ◽  
Vol 18 (1) ◽  
pp. 35-50 ◽  
Author(s):  
Hatem Ltaief ◽  
Jakub Kurzak ◽  
Jack Dongarra ◽  
Rosa M. Badia
Keyword(s):  
Linear Algebra ◽  
High Performance ◽  
Eigenvalue Problems ◽  
Multicore Processors ◽  
Multicore Architectures ◽  
Band Matrices ◽  
Fine Grain ◽  
Dataflow Model ◽  
Singular Value Decompositions ◽  
Level Parallelism

The objective of this paper is to describe, in the context of multicore architectures, three different scheduler implementations for the two-sided linear algebra transformations, in particular the Hessenberg and Bidiagonal reductions which are the first steps for the standard eigenvalue problems and the singular value decompositions respectively. State-of-the-art dense linear algebra softwares, such as the LAPACK and ScaLAPACK libraries, suffer performance losses on multicore processors due to their inability to fully exploit thread-level parallelism. At the same time the fine-grain dataflow model gains popularity as a paradigm for programming multicore architectures. Buttari et al. (Parellel Comput. Syst. Appl. 35 (2009), 38–53) introduced the concept oftile algorithmsin which parallelism is no longer hidden inside Basic Linear Algebra Subprograms but is brought to the fore to yield much better performance. Along with efficient scheduling mechanisms for data-driven execution, these tile two-sided reductions achieve high performance computing by reaching up to 75% of the DGEMM peak on a 12000×12000 matrix with 16 Intel Tigerton 2.4 GHz processors. The main drawback of thetile algorithmsapproach for two-sided transformations is that the full reduction cannot be obtained in one stage. Other methods have to be considered to further reduce the band matrices to the required forms.

Aspects of microanalysis in a transmission electron microscope

1978 ◽  
Vol 36 (1) ◽  
pp. 510-511
Author(s):  
R. Sinclair ◽  
B.E. Jacobson
Keyword(s):  
Grain Size ◽  
Electron Beam ◽  
Electron Microscope ◽  
Chemical Analysis ◽  
Transmission Electron Microscope ◽  
Vapor Deposition ◽  
Critical Currents ◽  
X Ray ◽  
Fine Grain ◽  
Transmission Electron

INTRODUCTIONThe prospect of performing chemical analysis of thin specimens at any desired level of resolution is particularly appealing to the materials scientist. Commercial TEM-based systems are now available which virtually provide this capability. The purpose of this contribution is to illustrate its application to problems which would have been intractable until recently, pointing out some current limitations.X-RAY ANALYSISIn an attempt to fabricate superconducting materials with high critical currents and temperature, thin Nb3Sn films have been prepared by electron beam vapor deposition [1]. Fine-grain size material is desirable which may be achieved by codeposition with small amounts of Al2O3 . Figure 1 shows the STEM microstructure, with large (∽ 200 Å dia) voids present at the grain boundaries. Higher quality TEM micrographs (e.g. fig. 2) reveal the presence of small voids within the grains which are absent in pure Nb3Sn prepared under identical conditions. The X-ray spectrum from large (∽ lμ dia) or small (∽100 Ǻ dia) areas within the grains indicates only small amounts of A1 (fig.3).

Superior 2X2 Slides

1975 ◽  
Vol 33 ◽  
pp. 158-159
Author(s):  
Harry Schaefer ◽  
Bruce Wetzel
Keyword(s):  
New York ◽  
High Resolution ◽  
Black And White ◽  
Fine Grain ◽  
White Film

High resolution 24mm X 36mm positive transparencies can be made from original black and white negatives produced by SEM, TEM, and photomicrography with ease, convenience, and little expense. The resulting 2in X 2in slides are superior to 3¼in X 4in lantern slides for storage, transport, and sturdiness, and projection equipment is more readily available. By mating a 35mm camera directly to an enlarger lens board (Fig. 1), one combines many advantages of both. The negative is positioned and illuminated with the enlarger and then focussed and photographed with the camera on a fine grain black and white film.Specifically, a Durst Laborator 138 S 5in by 7in enlarger with 240/200 condensers and a 500 watt Opale bulb (Ehrenreich Photo-Optical Industries, Inc., New York, NY) is rotated to the horizontal and adjusted for comfortable eye level viewing.

Microstructure Development in a High Current Density NbTi Superconducting Composite

1985 ◽  
Vol 43 ◽  
pp. 186-189
Author(s):  
P. J. Lee ◽  
D. C. Larbalestier
Keyword(s):  
Current Density ◽  
High Current Density ◽  
Cold Drawing ◽  
Heat Treatments ◽  
Grain Structure ◽  
Fine Grain ◽  
Boundary Film ◽  
Quantitative Basis ◽  
Cold Worked ◽  
Very High

Several features of the metallurgy of superconducting composites of Nb-Ti in a Cu matrix are of interest. The cold drawing strains are generally of order 8-10, producing a very fine grain structure of diameter 30-50 nm. Heat treatments of as little as 3 hours at 300 C (∼ 0.27 TM) produce a thin (1-3 nm) Ti-rich grain boundary film, the precipitate later growing out at triple points to 50-100 nm dia. Further plastic deformation of these larger a-Ti precipitates by strains of 3-4 produces an elongated ribbon morphology (of order 3 x 50 nm in transverse section) and it is the thickness and separation of these precipitates which are believed to control the superconducting properties. The present paper describes initial attempts to put our understanding of the metallurgy of these heavily cold-worked composites on a quantitative basis. The composite studied was fabricated in our own laboratory, using six intermediate heat treatments. This process enabled very high critical current density (Jc) values to be obtained. Samples were cut from the composite at many processing stages and a report of the structure of a number of these samples is made here.

High-resolution observation of sintered alumina (Al2O3) using the specimen-heated and electron-beam-induced conductivity method in a UHR-SEM

1994 ◽  
Vol 52 ◽  
pp. 1046-1047
Author(s):  
K. Ogura ◽  
T. Suzuki ◽  
C. Nielsen
Keyword(s):  
Electron Beam ◽  
High Resolution ◽  
Specimen Preparation ◽  
Conductivity Method ◽  
Fine Grain ◽  
Grain Structures ◽  
Resolution Observation ◽  
Electron Microscopes ◽  
Scanning Electron Microscopes ◽  
Charging Effect

In spite of the complicated specimen preparation, Transmission Electron Microscopes (TEM) have traditionally been used for the investigation of the fine grain structures of sintered ceramics. Scanning Electron Microscopes (SEM) have not been used much for the same purpose as TEM because of poor results caused by the specimen charging effect, and also the lack of sufficient resolution. Here, we are presenting a successful result of high resolution imaging of sintered alumina (pure Al2O3) using the Specimen Heated and Electron Beam Induced Conductivity (SHEBIC) method, which we recently reported, in an ultrahigh resolution SEM (UHR-SEM). The JSM-6000F, equipped with a Field Emission Gun (FEG) and an in-lens specimen position, was used for this application.After sintered Al2O3 was sliced into a piece approximately 0.5 mm in thickness, one side was mechanically polished to get a shiny plane for the observation. When the observation was started at 20 kV, an enormous charging effect occured, and it was impossible to obtain a clear Secondary Electron (SE) image (Fig.1).

Sign in / Sign up

Export Citation Format

Share Document