Design of low frequency analog low pass filter using tunable pseudo resistors

2014 ◽  
Author(s):  
N. Neshatvar ◽  
H. Al Nashash ◽  
L. Albasha
Keyword(s):  
Low Frequency ◽  
Pass Filter ◽  
Low Pass Filter ◽  
Low Pass

A New Capacitance Multiplier Structure with High Multiplication Factor for Ultra-Low-Frequency Filter in Biomedical Applications

2019 ◽  
Vol 29 (07) ◽  
pp. 2050109
Author(s):  
Yan Li ◽  
Yong Liang Li
Keyword(s):  
Biomedical Applications ◽  
Low Frequency ◽  
Multiplication Factor ◽  
Frequency Filter ◽  
Pass Filter ◽  
Low Pass Filter ◽  
Physiological Signal ◽  
Wide Range ◽  
Low Pass ◽  
Capacitance Multiplier

A novel capacitance multiplier is proposed to implement an ultra-low-frequency filter for physiological signal processing in biomedical applications. With the proposed multiplier, a simple first-order low-pass filter achieves a [Formula: see text]3-dB frequency of 33.4[Formula: see text]μHz with a 1-pF capacitance and a 20[Formula: see text]k[Formula: see text] resistance. This corresponds to a multiplication factor of as large as [Formula: see text]. By changing the controlling terminal, the [Formula: see text]3-dB frequency can be tuned in a wide range of 33.4[Formula: see text]μHz–6.3[Formula: see text]kHz.

Design of the Broadband Standard Signal Generator for Laser Locating System of the Mine Hoisting Container

2013 ◽  
Vol 427-429 ◽  
pp. 2033-2036
Author(s):  
Di Fan ◽  
Yan Gao ◽  
Yue Zhao
Keyword(s):  
High Frequency ◽  
Low Frequency ◽  
Frequency Standard ◽  
Analog Filters ◽  
Laser Ranging ◽  
Pass Filter ◽  
Low Pass Filter ◽  
Noise Disturbance ◽  
Standard Signal ◽  
Low Pass

As the key junction between the ground and underground, hoisting systems as well as mines themselves are of vital importance to coalmine production. Laser ranging method is studied as a new solution of getting the real-time position directly. Furthermore, multi-scale phase based laser ranging principles are utilized in the system. The paper is aimed to conduct research into the problems existing in standard signal generating while using laser to locating the hoisting container, and to design standard sine generator circuits with DDS technology and DDS devices AD9850 to generate multiple frequency standard signals. In view of the serious noise disturbance in high frequency output, 4-order Chebyshev low-pass filter is designed, by using the integrated analog filters LT 6600-15, to filter the sine signals from AD9850 and to effectively weaken the noise disturbance. The established practical circuits are tested, obtaining trillion level high frequency and low frequency sine signals and fulfilling the requirements for the location system of hoisting containers.

scholarly journals Inductanceless high order low frequency filters for medical applications

2022 ◽  
Vol 12 (2) ◽  
pp. 1299
Author(s):  
Noor Thamer Almalah ◽  
Faris Hasan Aldabbagh
Keyword(s):  
Integrated Circuit ◽  
Low Frequency ◽  
Negative Resistance ◽  
Acceptable Result ◽  
Pass Filter ◽  
Low Pass Filter ◽  
Transconductance Amplifier ◽  
Low Pass ◽  
Minimum Number ◽  
Order Butterworth Filter

<p>In this paper, a designed circuit used for low-frequency filters is implemented and realized the filter is based on frequency-dependent negative resistance (FDNR) as an inductor simulator to substitute the traditional inductance, which is heavy and high cost due to the coil material manufacturing and size area. The simulator is based on an active operation amplifier or operation transconductance amplifier (OTA) that is easy to build in an integrated circuit with a minimum number of components. The third and higher-order Butterworth filter is simulated at low frequency for low pass filter to use in medical instruments and low-frequency applications. The designed circuit is compared with the traditional proportional integral controller enhanced (PIE) and T section ordinary filter. The results with magnitude and phase response were compared and an acceptable result is obtained. The filter can be used for general applications such as medical and other low-frequency filters needed.</p>

TECHNIQUE OF APPLICATION FOR PROCESSING OF LOW PASS FILTER LF SIGNALS

10.12737/7905 ◽  
2015 ◽  
Vol 7 (4) ◽  
pp. 35-38
Author(s):  
Табаков ◽  
Yu. Tabakov ◽  
Лавлинский ◽  
V. Lavlinskiy
Keyword(s):  
Mathematical Model ◽  
Block Diagram ◽  
Low Frequency ◽  
Frequency Signal ◽  
Pass Filter ◽  
Low Pass Filter ◽  
Low Pass ◽  
The Mathematical Model ◽  
40 Hz

The article includes a block diagram and the mathematical model for low pass filter designed for processing low frequency signal with a frequency of 10-40 Hz in order of eliminate various noises and interference.

Acoustic Perturbation Effects on the Fluid Dynamics and Swirling Flame Response in a Non-Premixed Co-Flow Burner

2010 ◽  
Author(s):  
Uyi Idahosa ◽  
Abhishek Saha ◽  
Navid Khatami ◽  
Chengying Xu ◽  
Saptarshi Basu
Keyword(s):  
Heat Release ◽  
Low Frequency ◽  
Ccd Camera ◽  
Pass Filter ◽  
Low Pass Filter ◽  
Fuel Flow ◽  
Flame Dynamics ◽  
Flame Response ◽  
Low Pass ◽  
Swirling Flame

An investigation into the response of non-premixed swirling flames to acoustic perturbations at various frequencies (fp = 0–315 Hz) and swirl intensities (S = 0.09 and 0.34) is carried out. Perturbations are generated using a loudspeaker at the base of an atmospheric co-flow burner with resulting velocity oscillation amplitudes |u′/Uavg| in the 0.03–0.30 range. The dependence of flame dynamics on the relative richness of the flame is investigated by studying various constant fuel flow rate flame configurations. Flame heat release is quantitatively measured and simultaneously imaged using a photomultiplier (PMT) and a phase-locked CCD camera. Both of which are fitted with 430nm bandpass filters for observing CH*chemiluminescence. The flame response is observed to exhibit a low-pass filter characteristic with minimal flame response beyond pulsing frequencies of 200Hz. Flames at lower fuel flow rates are observed to remain attached to the central fuel pipe at all acoustic pulsing frequencies. PIV imaging of the associated isothermal fields show the amplification in flame aspect ratio is caused by the narrowing of the inner recirculation zone (IRZ). The Rayleigh criterion (R) is used to assess the potential for instability of specific perturbation configurations and is found to be a good predictor of unstable modes. Phase conditioned analysis of the flame dynamics yield additional criteria in highly responsive modes to include the effective amplitude of velocity oscillations induced by the acoustic pulsing. Highly amplified responses were observed in pulsed flame configurations with Strouhal numbers (St = fpUavg/dm) in the 1–3.5 range. Heat release to velocity perturbation time delays on the order of the acoustic pulsing period also characterized the highly responsive flames. Finally, wavelet analyses of heat release perturbations indicate sustained low frequency oscillations that become more prominent for low acoustic pulsing frequencies in lean flame configurations.

scholarly journals Dynamics of Excitation and Inhibition in the Light-Adapted Limulus Eye in situ

1971 ◽  
Vol 58 (1) ◽  
pp. 1-19 ◽  
Author(s):  
Marguerite Biederman-Thorson ◽  
John Thorson
Keyword(s):  
Steady State ◽  
Lateral Inhibition ◽  
Low Frequency ◽  
Dynamic Responses ◽  
Relaxation Processes ◽  
Pass Filter ◽  
Generator Potential ◽  
Low Pass Filter ◽  
Low Pass

The dynamics of spike discharge in eccentric cell axons from the in situ lateral eye of Limulus, under small sinusoidal modulation of light to which the eye is adapted, are described over two decades of light intensity and nearly three decades of frequency. Steady-state lateral inhibition coefficients, derived from the very low-frequency response, average 0.04 at three interommatidial spacings. The gain vs. frequency of a singly illuminated ommatidium is described closely from 0.004 to 0.4 cps by the linear transfer function s0.25; this function also accounts approximately for the measured phase leads, the small signal adaptation following small step inputs, and for Pinter's (1966) earlier low-frequency generator potential data. We suggest that such dynamics could arise from a summation in the generator potential of distributed intensity-dependent relaxation processes along the dendrite and rhabdome. Analysis of the dynamic responses of an eccentric cell with and without simultaneously modulated illumination of particular neighbors indicates an effect equivalent to self-inhibition acting via a first-order low-pass filter with time constant 0.42 sec, and steady-state gain near 4.0. The corresponding filters for lateral inhibition required time constants from 0.35 to 1 sec and effective finite delay of 50–90 msec.

Construction of a High-Pass Digital Filter from a Low-Pass Digital Filter

1994 ◽  
Vol 10 (4) ◽  
pp. 374-381 ◽  
Author(s):  
Stephen D. Murphy ◽  
D. Gordon E. Robertson
Keyword(s):  
Digital Filter ◽  
Low Frequency ◽  
Frequency Noise ◽  
Band Pass Filter ◽  
Low Frequency Noise ◽  
Pass Filter ◽  
Low Pass Filter ◽  
High Pass Filter ◽  
Low Pass ◽  
High Pass

To remove low-frequency noise from data such as DC-bias from electromyo-grams (EMGs) or drift from force transducers, a high-pass filter was constructed from a low-pass filter of known characteristics. A summary of the necessary steps required to transform the low-pass digital were developed. Contaminated EMG and force platform data were used to test the filter. The high-pass filter successfully removed the low-frequency noise from the EMG signals. The high-pass filter was then cascaded with the low-pass filter to produce a band-pass filter to enable simultaneous high- and low-frequency noise reduction.

SEISMIC WAVE STUDIES OVER A HIGH‐SPEED SURFACE LAYER

Geophysics ◽  
1956 ◽  
Vol 21 (2) ◽  
pp. 285-298 ◽  
Author(s):  
Frank Press ◽  
Milton B. Dobrin
Keyword(s):  
Surface Layer ◽  
Surface Waves ◽  
High Speed ◽  
Low Frequency ◽  
Eagle Ford Shale ◽  
Pass Filter ◽  
Low Pass Filter ◽  
Austin Chalk ◽  
Low Pass ◽  
High Frequency Waves

The propagation of compressional, shear, and surface waves was studied along a 3,200 ft profile at a location where a 95‐ft‐thick surface layer of Austin chalk, with a compressional velocity of about 9,900 ft/sec, overlies a 400‐ft section of Eagle Ford shale with a speed of about 6,500 ft/sec. Woodbine sand, with a velocity of about 9,900 ft/sec, underlies the shale. Refracted first arrivals transmitted through the high speed surface layer show an increase of frequency with distance from the shot. A refracted second arrival from the Woodbine decreases in frequency and, after correction for spreading, increases in relative amplitude with distance. This would indicate that the high‐speed surface layer acts as a high‐pass filter for energy transmitted horizontally and as a low‐pass filter for energy transmitted vertically through the layer. Shear waves transmitted through the Austin chalk are also observed. Surface waves consist of two groups of arrivals; a brief train of high‐frequency waves (greater than 20 cps) propagated almost entirely in the surface layer is followed by a short train of low frequency waves. Unlike surface waves in most other localities, the two groups show almost no dispersion. The characteristics of both kinds of waves are interpreted qualitatively in terms of the layering.

Error Analyzing Method for Rotation Inertial Navigation System Based on Fourier Transform

2013 ◽  
Vol 336-338 ◽  
pp. 982-987 ◽  
Author(s):  
Jian Hua Cheng ◽  
Bing Yu Wang ◽  
Dai Dai Chen
Keyword(s):  
Fourier Transform ◽  
Navigation System ◽  
Inertial Navigation System ◽  
Inertial Navigation ◽  
Low Frequency ◽  
Pass Filter ◽  
Low Pass Filter ◽  
Low Pass ◽  
Frequency Components ◽  
Navigation Errors

According with the problem that the error propagative characteristics of rotation inertial navigation system can not be quantitatively analyzed, a new error analyzing method is proposed. As the inertial navigation system can be equivalent to a low pass filter, the method converted the complex gyro drifts into signal which can be quantitatively analyzed after modulating through Fourier transform, thus the low frequency components of the error can be extracted. The relationship between navigation errors and gyro drifts is built by using the conventional error equations of strapdown inertial navigation system. The comparative analyses and computer simulation of conventional, uniaxial unidirectional and uniaxial reciprocating system prove the correctness and feasibility of this method. This method provides an effective reference for other same types of control system error analyses.

Sign in / Sign up

Export Citation Format

Share Document