1480-nm pump laser with asymmetric quaternary cladding structure achieving high output power of <1.2 W with low power consumption

2005 ◽  
Author(s):  
Y. Nagashima ◽  
S. Onuki ◽  
Y. Shimose ◽  
A. Yamada ◽  
T. Kikugawa
Keyword(s):  
Power Consumption ◽  
Low Power ◽  
Output Power ◽  
Pump Laser ◽  
Low Power Consumption ◽  
High Output Power ◽  
High Output

scholarly journals Electromechanical Modeling of Vibration-Based Piezoelectric Nanogenerator with Multilayered Cross-Section for Low-Power Consumption Devices

Micromachines ◽  
2020 ◽  
Vol 11 (9) ◽  
pp. 860 ◽  
Author(s):  
Ernesto A. Elvira-Hernández ◽  
Juan C. Anaya-Zavaleta ◽  
Eustaquio Martínez-Cisneros ◽  
Francisco López-Huerta ◽  
Luz Antonio Aguilera-Cortés ◽  
...  
Keyword(s):  
Zinc Oxide ◽  
Power Consumption ◽  
Low Power ◽  
Output Power ◽  
Electrical Energy ◽  
Load Resistance ◽  
Low Power Consumption ◽  
Zinc Oxide Film ◽  
Electromechanical Behavior ◽  
Electromechanical Modeling

Piezoelectric nanogenerators can convert energy from ambient vibrations into electrical energy. In the future, these nanogenerators could substitute conventional electrochemical batteries to supply electrical energy to consumer electronics. The optimal design of nanogenerators is fundamental in order to achieve their best electromechanical behavior. We present the analytical electromechanical modeling of a vibration-based piezoelectric nanogenerator composed of a double-clamped beam with five multilayered cross-sections. This nanogenerator design has a central seismic mass (910 μm thickness) and substrate (125 μm thickness) of polyethylene terephthalate (PET) as well as a zinc oxide film (100 nm thickness) at the bottom of each end. The zinc oxide (ZnO) films have two aluminum electrodes (100 nm thickness) through which the generated electrical energy is extracted. The analytical electromechanical modeling is based on the Rayleigh method, Euler–Bernoulli beam theory and Macaulay method. In addition, finite element method (FEM) models are developed to estimate the electromechanical behavior of the nanogenerator. These FEM models consider air damping at atmospheric pressure and optimum load resistance. The analytical modeling results agree well with respect to those of FEM models. For applications under accelerations in y-direction of 2.50 m/s2 and an optimal load resistance of 32,458 Ω, the maximum output power and output power density of the nanogenerator at resonance (119.9 Hz) are 50.44 μW and 82.36 W/m3, respectively. This nanogenerator could be used to convert the ambient mechanical vibrations into electrical energy and supply low-power consumption devices.

Optimal design of a high homogeneous and small-size shim coil for atomic spin gyroscope based on 0-1 linear programming

2020 ◽  
Vol 64 (1-4) ◽  
pp. 165-172
Author(s):  
Dongge Deng ◽  
Mingzhi Zhu ◽  
Qiang Shu ◽  
Baoxu Wang ◽  
Fei Yang
Keyword(s):  
Linear Programming ◽  
Power Consumption ◽  
Low Power ◽  
Optimization Design ◽  
Structural Parameters ◽  
Axial Position ◽  
Low Power Consumption ◽  
Optimal Method ◽  
Atomic Spin ◽  
Shim Coil

It is necessary to develop a high homogeneous, low power consumption, high frequency and small-size shim coil for high precision and low-cost atomic spin gyroscope (ASG). To provide the shim coil, a multi-objective optimization design method is proposed. All structural parameters including the wire diameter are optimized. In addition to the homogeneity, the size of optimized coil, especially the axial position and winding number, is restricted to develop the small-size shim coil with low power consumption. The 0-1 linear programming is adopted in the optimal model to conveniently describe winding distributions. The branch and bound algorithm is used to solve this model. Theoretical optimization results show that the homogeneity of the optimized shim coil is several orders of magnitudes better than the same-size solenoid. A simulation experiment is also conducted. Experimental results show that optimization results are verified, and power consumption of the optimized coil is about half of the solenoid when providing the same uniform magnetic field. This indicates that the proposed optimal method is feasible to develop shim coil for ASG.

An Ultra-low Power Consumption MAC Protocol Complied with IEEE 802.15.4/4e for Wireless Smart Utility Networks

2016 ◽  
Vol 136 (11) ◽  
pp. 1555-1566 ◽  
Author(s):  
Jun Fujiwara ◽  
Hiroshi Harada ◽  
Takuya Kawata ◽  
Kentaro Sakamoto ◽  
Sota Tsuchiya ◽  
...  
Keyword(s):  
Power Consumption ◽  
Low Power ◽  
Ieee 802.15.4 ◽  
Mac Protocol ◽  
Low Power Consumption ◽  
Ultra Low Power
Sign in / Sign up

Export Citation Format

Share Document