The influence of "off-axis" from [100] oriented Si wafers on junction depth and sheet resistance for low-energy implantation and rapid thermal annealing

2003 ◽  
Author(s):  
W. Lerch ◽  
D.F. Downey ◽  
E.A. Arevalo ◽  
R. Ostermeir
Keyword(s):  
Sheet Resistance ◽  
Thermal Annealing ◽  
Rapid Thermal Annealing ◽  
Low Energy ◽  
Junction Depth

Characterisation of Low Energy Boron Implantation and Fast Ramp-Up Rapid Thermal Annealing

1998 ◽  
Vol 525 ◽  
Author(s):  
E. J. H. Collart ◽  
G. de Cock ◽  
A. J. Murrell ◽  
M. A. Foad
Keyword(s):  
Thermal Annealing ◽  
Rapid Thermal Annealing ◽  
Thermal Processing ◽  
Rapid Thermal Processing ◽  
Low Energy ◽  
Electrical Activation ◽  
Junction Depth ◽  
Boron Implantation

ABSTRACTThe effects of ramp-up rate during rapid thermal processing of ultra-shallow boron implants have been investigated. Ramp-up rates were varied between 25 °C and 200 °C for two types of anneals: soak anneals and spike anneals. It was found that the ramp-up rate had very little influence on junction depth or electrical activation for both types of anneals. Spike anneals did produce shallower profiles than soak anneal for a comparable electrical activation and may be an option for future processes.

Effect of a Ti-capped and Ti-mediated Layer on Co Silicide Formation

2002 ◽  
Vol 716 ◽  
Author(s):  
G.Z. Pan ◽  
E.W. Chang ◽  
Y. Rahmat-Samii
Keyword(s):  
Electron Diffraction ◽  
Sheet Resistance ◽  
Thermal Annealing ◽  
Rapid Thermal Annealing ◽  
Diffusion Barrier ◽  
Silicide Formation ◽  
Plan View ◽  
Processing Window

AbstractWe comparatively studied the formation of ultra thin Co silicides, Co2Si, CoSi and CoSi2, with/without a Ti-capped and Ti-mediated layer by using rapid thermal annealing in a N2 ambient. Four-point-probe sheet resistance measurements and plan-view electron diffraction were used to characterize the silicides as well as the epitaxial characteristics of CoSi2 with Si. We found that the formation of the Co silicides and their existing duration are strongly influenced by the presence of a Ti-capped and Ti-mediated layer. A Ti-capped layer promotes significantly CoSi formation but suppresses Co2Si, and delays CoSi2, which advantageously increases the silicidation-processing window. A Ti-mediated layer acting as a diffusion barrier to the supply of Co suppresses the formation of both Co2Si and CoSi but energetically favors directly forming CoSi2. Plan-view electron diffraction studies indicated that both a Ti-capped and Ti-mediated layer could be used to form ultra thin epitaxial CoSi2 silicide.

Formation and Morphology Evolution of Nickel Germanides on Ge (100) under Rapid Thermal Annealing

2004 ◽  
Vol 810 ◽  
Author(s):  
K.Y. Lee ◽  
S.L. Liew ◽  
S.J. Chua ◽  
D.Z. Chi ◽  
H.P. Sun ◽  
...  
Keyword(s):  
Grain Growth ◽  
Sheet Resistance ◽  
Thermal Annealing ◽  
Rapid Thermal Annealing ◽  
Microstructure Evolution ◽  
Interfacial Microstructure ◽  
Morphology Evolution ◽  
Smooth Interface ◽  
Substrate Side ◽  
Nickel Germanides

ABSTRACTPhase formation and interfacial microstructure evolution of nickel germanides formed by rapid thermal annealing in a 15-nm Ni/Ge (100) system have been studied. Coexistence of a NiGe layer and Ni-rich germanide particles was detected at 250°C. Highly textured NiGe film with a smooth interface with Ge was observed. Annealing at higher temperatures resulted in grain growth and severe grooving of the NiGe film at the substrate side, followed by serious agglomeration above 500°C. Fairly low sheet resistance was achieved in 250-500°C where the NiGe film continuity was uninterrupted.

Formation of Silicides by Rapid Thermal Annealing Over Polycrystalline Silicon

1985 ◽  
Vol 54 ◽  
Author(s):  
J. Narayan ◽  
T. A. Stephenson ◽  
T. Brat ◽  
D. Fathy ◽  
S. J. Pennycook
Keyword(s):  
Titanium Oxide ◽  
Sheet Resistance ◽  
Thermal Annealing ◽  
Rapid Thermal Annealing ◽  
Polycrystalline Silicon ◽  
Annealing Treatment ◽  
External Layer ◽  
Rich Mixture ◽  
Thermal Annealing Treatment ◽  
Rapid Thermal Annealing Treatment

ABSTRACTThe formation of titanium suicide over polycrystalline silicon has been investigated after rapid thermal annealing treatment in nitrogen and argon ambients. After rapid thermal annealing 300 Å thick titanium overlayer at 900°C for 10 seconds, the sheet resistance of about 3 Ω/□ was achieved, which decreased to 2 Ω/□ after 1100°C / 10s treatment. The TiSi2 Phase was found to be stable after RTA treatments up to 1100°C /10s with no or negligible migration of titanium along the grain boundaries in polycrystalline silicon. In the nitrogen ambient, an external layer (titanium rich, mixture of titanium oxide and nitride) was observed to form after the RTA treatment, but the surface was found clean in the argon ambient.

Rapid Thermal Annealing and Oxidation of Silicon Wafers with Back-Side Films

1997 ◽  
Vol 470 ◽  
Author(s):  
A. T. Fiory
Keyword(s):  
Thermal Oxidation ◽  
Sheet Resistance ◽  
Thermal Annealing ◽  
Rapid Thermal Annealing ◽  
Temperature Control ◽  
Thermal Processing ◽  
Rapid Thermal Processing ◽  
Oxide Thickness ◽  
Back Side ◽  
Control Accuracy

ABSTRACTTemperatures for lamp-heated rapid thermal processing of wafers with various back-side films were controlled by a Lucent Technologies pyrometer which uses a/c lamp ripple to compensate for emissivity. Process temperatures for anneals of arsenic and boron implants were inferred from post-anneal sheet resistance, and for rapid thermal oxidation, from oxide thickness. Results imply temperature control accuracy of 12°C to 17°C at 3 standard deviations.

GROWTH OF SiC NANOSTRUCTURES ON Si (100) USING LOW ENERGY CARBON ION IMPLANTATION AND ELECTRON BEAM RAPID THERMAL ANNEALING

2004 ◽  
Vol 03 (04n05) ◽  
pp. 425-430 ◽  
Author(s):  
A. MARKWITZ ◽  
S. JOHNSON ◽  
M. RUDOLPHI ◽  
H. BAUMANN
Keyword(s):  
Atomic Force Microscopy ◽  
Electron Beam ◽  
Ion Implantation ◽  
Thermal Annealing ◽  
Rapid Thermal Annealing ◽  
Low Energy ◽  
Silicon Surfaces ◽  
Force Microscopy ◽  
Atomic Force ◽  
Implantation Fluence

A combination of 10 keV 13 C low energy ion implantation and electron beam rapid thermal annealing (EB-RTA) is used to fabricate silicon carbide nanostructures on (100) silicon surfaces. These large ellipsoidal features appear after EB-RTA at 1000°C for 15 s. Prior to annealing, the silicon surfaces are virgin-like flat. Atomic force microscopy was used to study the morphology of these structures and it was found that the diameter and number of nanoboulders are linearly dependent on the implantation fluence. Further, a linear relationship between nanoboulder diameter and spacing suggests crystal coarsening is a fundamental element in the growth mechanism.

Rapid Thermal Annealing of Ion Implanted p-n Junction in Silicon

1985 ◽  
Vol 52 ◽  
Author(s):  
C. Ho ◽  
R. Kwor ◽  
C. Araujo ◽  
J. Gelpey
Keyword(s):  
Leakage Current ◽  
Thermal Annealing ◽  
Rapid Thermal Annealing ◽  
Dwell Time ◽  
Annealing Temperature ◽  
Current Analysis ◽  
Junction Depth ◽  
Leakage Currents ◽  
Dopant Activation ◽  
Secondary Ion

ABSTRACTThe rapid thermal annealing (RTA) of p+n and n+p diodes, fabricated by the LOCOS process, and its subsequent effects on junction leakage current, junction depth and dopant activation were investigated. The reverse bias diode leakage currents of implanted Si <100> samples (As+: 60 KeY, 5×1014 5×1015 cm−2, B+: 25 KeV, l×1014, l×1015 cm−2 and BF2+: 45 KeV, 1×1015cm−2 ) were measured as functions of annealing temperature, and dwell time. The annealing was performed using an Eaton RTA system (Nova ROA-400) at temperatures ranging from 950 °C to 1150 °C. Annealing times ranged from 0.2 sec. to 10 sec. The results from the diode leakage current analysis are correlated with those from Secondary Ion Mass Spectroscopy (SIMS) and differential Hall measurements. The reverse-biased leakage currents from the RTA-treated samples are compared with those from furnace-annealed samples.

Formation of Titanium Silicide by Multiple Arsenic Implantations and Ion Beam Mixing

1991 ◽  
Vol 224 ◽  
Author(s):  
Po-Ching Chen ◽  
Jian-Yang Lin ◽  
Huey-Liang Hwang
Keyword(s):  
Electron Diffraction ◽  
Sheet Resistance ◽  
Thermal Annealing ◽  
Rapid Thermal Annealing ◽  
Ion Beam ◽  
Titanium Silicide ◽  
Mixing Conditions ◽  
Cross Sectional ◽  
Ion Beam Mixing ◽  
Post Annealing

AbstractTitanium silicide was formed on the top of Si wafers by arsenic ion beam mixing and rapid thermal annealing. Three different arsenic-ion mixing conditions were examined in this work. The sheet resistance, residue As concentration post annealing and TiSi2 phase were characterized by using the* four-point probe, RBS and electron diffraction, respectively. TiSi2 of C54 phase was identified in the doubly implanted samples. The thickness of the Ti silicide and the TiSi2/Si interface were observed by the cross-sectional TEM.

Sign in / Sign up

Export Citation Format

Share Document