A case study of BGA package for high speed channel with non-ideal ground induced resonance conditions

2014 ◽  
Author(s):  
Vijay Kumar Singh ◽  
Raj Kumar Nagpal ◽  
Jai Narayan Tripathi
Keyword(s):  
High Speed ◽  
Bga Package

scholarly journals Influence of Hydrogeochemistry on Tunnel Drainage in Evaporitic Formations: El Regajal Tunnel Case Study (Aranjuez, Spain)

2021 ◽  
Vol 13 (3) ◽  
pp. 1505
Author(s):  
Ignacio Menéndez Pidal ◽  
Jose Antonio Mancebo Piqueras ◽  
Eugenio Sanz Pérez ◽  
Clemente Sáenz Sanz
Keyword(s):  
High Speed ◽  
Civil Engineering ◽  
Saturation Index ◽  
The Subject ◽  
Under Construction ◽  
Underground Flow ◽  
Very High ◽  
Over Time

Many of the large number of underground works constructed or under construction in recent years are in unfavorable terrains facing unusual situations and construction conditions. This is the case of the subject under study in this paper: a tunnel excavated in evaporitic rocks that experienced significant karstification problems very quickly over time. As a result of this situation, the causes that may underlie this rapid karstification are investigated and a novel methodology is presented in civil engineering where the use of saturation indices for the different mineral specimens present has been crucial. The drainage of the rock massif of El Regajal (Madrid-Toledo, Spain, in the Madrid-Valencia high-speed train line) was studied and permitted the in-situ study of the hydrogeochemical evolution of water flow in the Miocene evaporitic materials of the Tajo Basin as a full-scale testing laboratory, that are conforms as a whole, a single aquifer. The work provides a novel methodology based on the calculation of activities through the hydrogeochemical study of water samples in different piezometers, estimating the saturation index of different saline materials and the dissolution capacity of the brine, which is surprisingly very high despite the high electrical conductivity. The circulating brine appears unsaturated with respect to thenardite, mirabilite, epsomite, glauberite, and halite. The alteration of the underground flow and the consequent renewal of the water of the aquifer by the infiltration water of rain and irrigation is the cause of the hydrogeochemical imbalance and the modification of the characteristics of the massif. These modifications include very important loss of material by dissolution, altering the resistance of the terrain and the increase of the porosity. Simultaneously, different expansive and recrystallization processes that decrease the porosity of the massif were identified in the present work. The hydrogeochemical study allows the evolution of these phenomena to be followed over time, and this, in turn, may facilitate the implementation of preventive works in civil engineering.

Removing W Polymer Residue from BEOL Structures Using DSP+ (Dilute Sulfuric-Peroxide-HF) Mixture – A Case Study

2012 ◽  
Vol 195 ◽  
pp. 128-131 ◽  
Author(s):  
Hun Hee Lee ◽  
Min Sang Yun ◽  
Hyun Wook Lee ◽  
Jin Goo Park
Keyword(s):  
High Speed ◽  
Semiconductor Device ◽  
Environmental Issues ◽  
Low Power Consumption ◽  
Device Performance ◽  
Metal Gate ◽  
Feature Size ◽  
High K ◽  
Removal Of Metal

As the feature size of semiconductor device shrinks continuously, various high-K metals for 3-D structures have been applied to improve the device performance, such as high speed and low power consumption. Metal gate fabrication requires the removal of metal and polymer residues after etching process without causing any undesired etching and corrosion of metals. The conventional sulfuric-peroxide mixture (SPM) has many disadvantages like the corrosion of metals, environmental issues etc., DSP+(dilute sulfuric-peroxide-HF mixture) chemical is currently used for the removal of post etch residues on device surface, to replace the conventional SPM cleaning [. Due to the increased usage of metal gate in devices in recent times, the application of DSP+chemicals for cleaning processes also increases [.

HFTViz: Visualization for the exploration of high frequency trading data

2021 ◽  
pp. 147387162110649
Author(s):  
Javad Yaali ◽  
Vincent Grégoire ◽  
Thomas Hurtut
Keyword(s):  
Portfolio Management ◽  
High Frequency ◽  
High Speed ◽  
High Frequency Trading ◽  
Domain Experts ◽  
Risk Return ◽  
Visualization Tools ◽  
Liquidity Measures ◽  
Trading Volumes

High Frequency Trading (HFT), mainly based on high speed infrastructure, is a significant element of the trading industry. However, trading machines generate enormous quantities of trading messages that are difficult to explore for financial researchers and traders. Visualization tools of financial data usually focus on portfolio management and the analysis of the relationships between risk and return. Beside risk-return relationship, there are other aspects that attract financial researchers like liquidity and moments of flash crashes in the market. HFT researchers can extract these aspects from HFT data since it shows every detail of the market movement. In this paper, we present HFTViz, a visualization tool designed to help financial researchers explore the HFT dataset provided by NASDAQ exchange. HFTViz provides a comprehensive dashboard aimed at facilitate HFT data exploration. HFTViz contains two sections. It first proposes an overview of the market on a specific date. After selecting desired stocks from overview visualization to investigate in detail, HFTViz also provides a detailed view of the trading messages, the trading volumes and the liquidity measures. In a case study gathering five domain experts, we illustrate the usefulness of HFTViz.

Notch-based speed trajectory optimisation for high-speed railway automatic train operation

2021 ◽  
pp. 095440972110421
Author(s):  
Minling Feng ◽  
Chaoxian Wu ◽  
Shaofeng Lu ◽  
Yihui Wang
Keyword(s):  
High Speed ◽  
Applied Force ◽  
Mixed Integer ◽  
High Speed Railway ◽  
Train Operation ◽  
Train Speed ◽  
Automatic Train Operation ◽  
The Impact ◽  
Trajectory Optimisation

Automatic train operation (ATO) systems are fast becoming one of the key components of the intelligent high-speed railway (HSR). Designing an effective optimal speed trajectory for ATO is critical to guide the high-speed train (HST) to operate with high service quality in a more energy-efficient way. In many advanced HSR systems, the traction/braking systems would provide multiple notches to satisfy the traction/braking demands. This paper modelled the applied force as a controlled variable based on the selection of notch to realise a notch-based train speed trajectory optimisation model to be solved by mixed integer linear programming (MILP). A notch selection model with flexible vertical relaxation was proposed to allow the traction/braking efforts to change dynamically along with the selected notch by introducing a series of binary variables. Two case studies were proposed in this paper where Case study 1 was conducted to investigate the impact of the dynamic notch selection on train operations, and the optimal result indicates that the applied force can be flexibly adjusted corresponding to different notches following a similar operation sequence determined by optimal train control theory. Moreover, in addition to the maximum traction/braking notches and coasting, medium notches with appropriate vertical relaxation would be applied in accordance with the specific traction/braking demands to make the model feasible. In Case study 2, a comprehensive numerical example with the parameters of CRH380AL HST demonstrates the robustness of the model to deal with the varying speed limit and gradient in a real-world scenario. The notch-based model is able to obtain a more realistic optimal strategy containing dynamic notch selection and speed trajectory with an increase (1.622%) in energy consumption by comparing the results of the proposed model and the non-notch model.

Biomechanical Analysis of a World Record Javelin Throw: A Case Study

1985 ◽  
Vol 1 (1) ◽  
pp. 73-77 ◽  
Author(s):  
Robert J. Gregor ◽  
Marilyn Pink
Keyword(s):  
High Speed ◽  
Video Camera ◽  
The United States ◽  
Track And Field ◽  
Biomechanical Analysis ◽  
World Record ◽  
High Speed Video ◽  
High Speed Video Camera ◽  
Ongoing Project

As part of an ongoing project to evaluate elite track and field throwers in the United States, the javelin competition was filmed during the 1983 Pepsi Invitational Track Meet. A high-speed video camera (Spin Physics SP2000) was positioned orthogonal to the javelin runway to record the release of all throws. During this competition, Tom Petranoff’s world record (99.72 m) was filmed at 200 fields per second. Subsequent frame-by-frame digitization yielded results consistent with reports in the literature. Release velocity was 32.3 m/s and represents one of the highest values ever reported. Angle of release was .57r, javelin attitude at release was .64r» and angle of attack was .07r. While optimum values for these release parameters, in light of published results, remain open to discussion, the results presented here represent unique information on a world record performance and can serve as a basis of comparison for future performances.

scholarly journals How Does the Spatial Structure of High-Speed Rail Station Areas Evolve? A Case Study of Zhengzhou East Railway Station, China

2021 ◽  
Vol 11 (23) ◽  
pp. 11132
Author(s):  
Xiaomin Wang ◽  
Jingyu Liu ◽  
Wenxin Zhang
Keyword(s):  
Spatial Structure ◽  
High Speed ◽  
Rapid Development ◽  
Economic Activities ◽  
Land Rent ◽  
High Speed Rail ◽  
Production Factors ◽  
Market Factors ◽  
And Diffusion

The rapid development of high-speed rail (HSR) and station areas has shortened the spatial and temporal distances among cities, improved the accessibility of cities, and affected the spatial agglomeration and diffusion of populations and of social and economic activities. This has led to spatial reconfiguration of production factors within cities, which has the potential to drive the reconstruction of urban spatial structures. Based on POI and land-use data, this paper defines the spatial scope of the HSR station area and explores the characteristics and influencing factors of its spatial structure from the perspective of industry. The study area i is set at 2000 m. Since the opening of the HSR, the industrial distribution has exhibited a significant circular, multi-core, and axial belt spatial structure. The spatial structure of each sub-industry is different. On the whole, internal and external transport and agglomeration economies have significant impacts on the industrial spatial distribution, and land rent has gradually decreased in importance with the development of HSR station areas. The intensity of the effects of different factors varies among different industries. The mechanisms by which the spatial structure of the station area is formed are discussed and include location accessibility, micro-market factors, node station attributes, the availability of a sufficient amount of undeveloped land, the characteristics and needs of HSR passengers, and policies and systems.

Comparative Assessment of Rule-Based Design on the Pressures and Resulting Scantlings of High Speed Powercrafts

2020 ◽  
Author(s):  
Jean-Baptiste R.G. Souppez ◽  
Ermina Begovic ◽  
Pradeep Sensharma ◽  
Fuhua Wang ◽  
Anders Rosén
Keyword(s):  
High Speed ◽  
Future Trends ◽  
Rule Based ◽  
Marine Vehicles ◽  
Current State ◽  
Regulatory Bodies ◽  
1960S And 1970S ◽  
The 1960S ◽  
Design Case Study

The rules and regulations inherent to the design pressures and scantlings of high-speed powercrafts are numerous, and regularly reviewed. Recently, the new ISO 12215-5:2019 made notable changes to the way high-speed crafts are analysed, including extending the acceleration experienced up to 8 g in certain circumstances. Nevertheless, despite the multiple iterations and variety of regulatory bodies, the seminal work undertaken on planing crafts throughout the 1960s and 1970s remains the foundation of any rule-based design requirement. Consequently, this paper investigates an array of recently published rules though a comparative design case study, the current state-of-the-art across a number of regulations, and the ultimate impact on scantlings. The study reveals that, despite divergence in intermediate calculations and assumptions, similar requirements are ultimately achieved. Eventually, discussion on the comparison undertaken and future trends in high-speed marine vehicles is provided, tackling the relevance of classical planing theory in light of contemporary innovations.

The Potential Effects of New High-Speed Corridor Towards Planning New Towns: Reflection on a Case Study

IEIS2019 ◽  
2020 ◽  
pp. 705-715
Author(s):  
Osman Ghanem ◽  
Khalid Mehmood Alam ◽  
Xuemei Li
Keyword(s):  
High Speed ◽  
New Towns
Sign in / Sign up

Export Citation Format

Share Document